HP HPE0-S59 Practice Exams
Last updated on Oct 21,2026- Exam Code: HPE0-S59
- Exam Name: HPE Compute Solutions
- Certification Provider: HP
- Latest update: Oct 21,2026
What is a limitation when creating a server profile?
- A . BIOS settings can be changed only when UEFI optimized is selected as boot mode
- B . ILO management is limited to the integration with Active Directory or LDAP
- C . Administrator cannot define more than 8 connections within a server profile
- D . It is not possible to create shared volumes on demand through a server profile
A
Explanation:
A limitation when creating a server profile in HPE OneView is that it is not possible to create shared volumes on demand directly through a server profile. Server profiles in HPE OneView are used to define and manage the configuration of compute nodes, including network connections, BIOS settings, and boot order, but they do not have the capability to dynamically create or manage shared storage volumes.
Reference: HPE OneView User Guide
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol
What must be done to complete this task?
- A . Enable FC primary and secondary boot on the modules through the HPE OneView interface
- B . FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- C . Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- D . Enter both modules into a maintenance mode, then enable FC connectivity through CLI
A
Explanation:
To use FC (Fibre Channel) as a storage access protocol with HPE Primera to boot HPE Synergy compute nodes, you must add FC upgrade licenses in HPE OneView. These licenses enable FC connectivity for the HPE Virtual Connect SE 100Gb F32 Modules, allowing the compute nodes to connect to the FC storage.
Reference: HPE OneView Licensing Guide
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?
- A . Brocade 32GB Fibre Channel Switch Module for HPE Synergy
- B . HPE virtual Connect SE 32 Gb FC Module for Synergy
- C . HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
- D . HPE Synergy 12 Gb SAS Connection Module
C
Explanation:
A logical interconnect group in HPE Synergy is used to define a consistent network configuration across multiple frames. The HPE Virtual Connect SE 100 Gb F32 Module for Synergy allows for logical interconnect groups to span across multiple frames. This is because the 100 Gb module supports high-speed connectivity and the necessary infrastructure to maintain consistent network configurations over multiple frames, which is essential for scalable and flexible Synergy environments.
Reference: HPE Synergy Logical Interconnect Groups
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2
Why would you recommend this change?
- A . HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
- B . HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
- C . HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
- D . HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort
B
Explanation:
HPE Composer 2 offers enhanced scalability compared to HPE Composer 1. While HPE Composer 1 and HPE OneView support up to 21 frames, HPE Composer 2 extends this limit, allowing for greater scalability and more efficient management of larger HPE Synergy environments. This makes HPE Composer 2 a suitable recommendation for customers needing to manage more than 21 frames.
Reference: HPE Synergy Composer 2 QuickSpecs
Which statement about HPE Superdome nPars is true?
- A . Chassis in the same nPar can have different CPU configuration
- B . Rack Management Controller is required Tor nPar configuration
- C . Chassis in the same nPar can have different memory configuration
- D . nPars are supported only with 3rd Generation Intel Xeon Scalable Processors
B
Explanation:
The Rack Management Controller (RMC) is a critical component for configuring nPartitions (nPars) in HPE Superdome systems. The RMC provides the necessary control and management interfaces to define and manage nPars, ensuring proper allocation of resources and isolation of workloads.
Reference: HPE Superdome Flex Management Guide
Your customer experienced some problems caused by outdated HPE Superdome Flex firmware.
Which update method should they use to avoid these issues in the future?
- A . HPE OneView method for I/O firmware update procedure
- B . RMC CLI to update I/O and HPE Persistent Memory firmware
- C . HPE OneView IT HPE Persistent Memory firmware must be updated.
- D . HPE SUM if HPE Persistent Memory firmware must be updated
D
Explanation:
HPE System Update Manager (SUM) is the recommended method for updating firmware on HPE Superdome Flex systems, especially when HPE Persistent Memory firmware needs to be updated. HPE SUM ensures that all firmware components are updated correctly and consistently, reducing the risk of compatibility issues.
Reference: HPE Superdome Flex Firmware Update Guide
HOTSPOT
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Explanation:
To check the Core Analysis Engine (CAE) Log on the HPE Superdome Flex 280, navigate to the Logs section in the management interface. This section provides access to various logs, including system, security, and diagnostic logs, which encompass the CAE logs necessary for detailed analysis and troubleshooting.
Reference: HPE Superdome Flex 280 Management Guide
The HPE D3940 storage module is designed to provide flexible and scalable storage within the HPE Synergy platform. Up to five D3940 storage modules can be installed in a single HPE Synergy frame when used with Gen10 servers. This configuration allows for high-density storage solutions within a single frame, making it ideal for environments that require substantial storage capacity.
Reference: HPE Synergy Storage Modules QuickSpecs
HOTSPOT
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Explanation:
To prevent a timeout and loss of communication during an external switch firmware upgrade, the customer should configure the LACP failover trigger within the uplink set. By setting the LACP failover trigger to "All active uplinks transition to offline," the configuration ensures that the traffic will be redirected to available uplinks in the event of an uplink failure or during the upgrade process, maintaining communication and preventing timeouts.
Reference: HPE Synergy Configuration Guide
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group
What should you check to fix the issue?
- A . if both FiexNICs are configured with the same speed
- B . If the logical enclosure is built on at least three HPE Synergy frames
- C . if both FiexNICs are connected to different networks
- D . if the logical enclosure is configured with redundant master modules
A
Explanation:
When troubleshooting a server profile in HPE OneView that is in a critical state due to a Link Aggregation Group (LAG), it is important to check if both FlexNICs are configured with the same speed. Inconsistent speeds can cause issues with link aggregation, leading to network instability and performance degradation.
Reference: HPE OneView Server Profile Troubleshooting Guide
Your customer uses HPE OneView to manage their HPE Synergy environment.
They plan to use it to manage a new set equipment that includes.
– 20 HPE ProLiant DL365 Gen10 Plus servers
– 20 HPE ProLiant DL380 Gen10 Plus servers
– 5 HPE Primera 650
– 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)
- A . HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
- B . HPE MSA 2062 Storage Array is not supported in HPE OneView
- C . HPE OneView replaces array management tools for both types of array
- D . HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
- E . HPE Primera 650 can be managed using HPE OneView.
BE
Explanation:
HPE MSA 2062 Storage Array is not supported in HPE OneView: HPE OneView does not provide management capabilities for the HPE MSA series, which includes the MSA 2062. These arrays must be managed using their dedicated management tools.
HPE Primera 650 can be managed using HPE OneView: HPE OneView supports the management of HPE Primera storage arrays, including the Primera 650, allowing for integrated management and monitoring within the OneView environment.
Reference: HPE OneView Support Matrix
HPE OneView User Guide