DELL EMC D-PE-OE-23 Practice Exams
Last updated on Oct 23,2026- Exam Code: D-PE-OE-23
- Exam Name: Dell Technologies PowerEdge Operate 2023
- Certification Provider: DELL EMC
- Latest update: Oct 23,2026
A customer acquired six R750 servers. They must add these servers to their existing R760 iDRAC Group but are encountering errors.
What is the reason for the errors?
- A . R750 iDRACs firmware is out of date.
- B . R750 iDRACs are not running the same version of firmware.
- C . 15G and 16G servers cannot be in the same group.
- D . The feature requires iDRAC Enterprise.
C
Explanation:
Understanding iDRAC Group Management and Compatibility Server Management and Configuration Tools (14%)
Define the function of the iDRAC, login procedures, licensing, and connection methods Explain the management interface options – LCC, racadm, OMSA, iSM, OME System Administration (18%)
Configure BIOS, Storage, virtual media, networking, user access, lockdown mode, and group management
Scenario Analysis
The customer has acquired six Dell PowerEdge R750 servers and wants to add them to an existing iDRAC Group that currently contains R760 servers. However, they are encountering errors during this process.
Understanding Dell Server Generations
PowerEdge R750: Part of the 15th Generation (15G) servers.
PowerEdge R760: Part of the 16th Generation (16G) servers.
iDRAC Group Manager Limitations
iDRAC Group Manager allows administrators to manage multiple servers from a single interface. Important Limitation: Servers of different generations cannot be grouped together in iDRAC Group Manager.
This is due to differences in firmware, hardware capabilities, and iDRAC features between server generations.
Impact: Attempting to add 15G servers (R750) to a group containing 16G servers (R760) will result in errors.
Evaluation of Options
Option A: R750 iDRACs firmware is out of date
Analysis: While outdated firmware can cause issues, it is not the primary reason here. Firmware updates would not resolve the incompatibility between different server generations.
Option B: R750 iDRACs are not running the same version of firmware
Analysis: Similar to Option A, firmware version mismatches can cause problems but not errors related to grouping different generations.
Option C: 15G and 16G servers cannot be in the same group
Correct Answer. This is the primary reason for the errors encountered.
Option D: The feature requires iDRAC Enterprise
Analysis: Since the customer already has an existing iDRAC group with R760 servers, they likely have
the necessary licensing.
Dell Operate Reference
Server Management and Configuration Tools (14%)
Emphasizes understanding iDRAC functionalities and limitations.
System Administration (18%)
Highlights the importance of group management and its constraints.
Conclusion
The errors occur because iDRAC Group Manager does not support grouping servers from different generations. The customer cannot add 15G servers (R750) to a group that contains 16G servers (R760).
What is a key feature introduced in OpenManage Mobile v2.0?
- A . Perform manual and batch server configuration
- B . Access iDRAC remotely
- C . Access servers remotely through OME
- D . Access SupportAssist reports
A technician is attempting to install a 64-bit OS on a server. The OS array is 2.8 TB. The OS install is unable to see the disk.
What should the technician do to install the OS?
- A . Switch the boot settings to UEFI
- B . Use USB to load Storage Drivers
- C . Use LC to install the OS
- D . Switch the Hard Drive boot sequence so that C: is first
A technician deploys a server. The iDRAC was configured with a static IP address and hostname. The technician can NOT ping the iDRAC from the workstation when using the hostname. The technician can ping the iDRAC with the IP address.
Which setting should the technician configure to fix the deployment?
- A . In the Lifecycle Controller, update the DNS Server value
- B . In the iDRAC GUI, select the Reset DNS Cache option.
- C . In the iDRAC GUI, select the Register DRAC on DNS option.
- D . In the Lifecycle Controller, update the DNS Server Name
A server has two 1100w power supplies. The system needs to enable or disable power supplies dynamically depending on power needs. Power Supply 2 needs to be main power supply.
Which two settings should the technician change? (Choose two.)
- A . Set Default Power Supply to PSU 2
- B . Enable Hot Spare for power supplies
- C . Set Primary Power Supply to PSU 2
- D . Set Power Cap to 1100w for the system
- E . Enable Power Factor Correction
You must configure a BOSS card with 2 x 120GB drives for a Dell EMC PowerEdge server.
What is the only supported mode?
- A . RAID 1
- B . Non-RAID Mirroring
- C . RAID 5
- D . RAID 0
Beginning with which generation Dell EMC PowerEdge server is the NDC available?
- A . 11G
- B . 12G
- C . 13G
- D . 14G
Beginning with which generation Dell EMC PowerEdge server is the NDC available?
- A . 11G
- B . 12G
- C . 13G
- D . 14G
A technician needs an iDRAC Enterprise feature that meets the following requirements:
– Provides capacity up to 16 GB
– User can create up to 16 partitions that can emulate a floppy drive, hard disk, or CD/DVD depending on selected emulation mode
Which feature should the technician use?
- A . Repository Manager
- B . iDRAC Remote File Share
- C . vFlash
- D . Dell Internal Dual SD Module
A technician is ready to deploy a Dell EMC PowerEdge server. If a critical part on the system board fails, they must be able to replace the system board, reconfigure components, and update the firmware revisions in the shortest possible time.
How should the technician meet this requirement?
- A . Use the iDRAC Rollback feature to restore the firmware revisions
- B . Back up component configurations using iSM
- C . Back up the profile using the System Profile Settings feature
- D . Use the iDRAC GUI to back up the Server Profile