DELL EMC D-PCM-DY-23 Practice Exams
Last updated on Nov 16,2026- Exam Code: D-PCM-DY-23
- Exam Name: Dell PowerSwitch Campus Deploy 2023
- Certification Provider: DELL EMC
- Latest update: Nov 16,2026
What describes VRRP advertisements?
- A . Advertisements can be changed independently in the Master router regardless of the backup routers
- B . Advertisements are sent from the Master router once every second by default
- C . Advertisements are fixed values and cannot be changed
- D . Advertisements are sent from the Master router once every three seconds by default
A customer is reporting that some critical PoE devices are shutting down randomly during daily activities. Devices on ports 1 and 3 should remain powered at all times.
Customer sends the show running-config output:
interface Gi1/0/1
spanning-tree portfast bpdufilter default
switchport access vlan 102
exit
!
interface Gi1/0/2
spanning-tree portfast bpdufilter default
switchport access vlan 102
exit
!
interface Gi1/0/3
spanning-tree portfast bpdufilter default
switchport access vlan 102
exit
!
interface Gi1/0/4
switchport mode trunk
switchport access vlan 205
switchport trunk native vlan 205
switchport trunk allowed vlan 102,106,205
exit
What recommendation should be given?
- A . Change the power profile used by the PoE devices.
- B . Raise the power priority on the ports.
- C . Verify the POE port license has not been exceeded.
- D . Reset the affected ports periodically.
Which protection is provided by the spanning tree root guard feature enabled on a switch port?
- A . Advertises the switch as the spanning tree root
- B . Forces the port to become the spanning tree root port
- C . Filters all inferior BPDUs received on the port
- D . Moves the port to a root-inconsistent state if a superior BPDU is received
In a PoE environment, what information does the Network Policy TLV exchange between the PSE and PD?
- A . Required Power, VLAN ID, and DSCP Value
- B . VLAN ID, IEEE Priority, and DSCP Value
- C . IEEE Priority, Required Power, and VLAN ID
- D . DSCP Value, Required Power, and IEEE Priority
When configuring a PBR route-map, what are the configurable "SET" options?
- A . set ip source, set ip next-hop, and set ip default next-hop
- B . set ip next-hop, set ip source, and set ip precedence
- C . set ip next-hop, set ip default next-hop, and set ip precedence
- D . set ip source, set ip default next-hop and set ip precedence
A user’s workstation has an IP phone connected to a Dell EMC N-Series switch.
What is the recommended number of VLANs that should be configured on the switch port?
- A . 0
- B . 1
- C . 2
- D . 3
What Dell PowerSwitch N-Series switches require QSFP28 to be used for stacking?
- A . N3200
- B . N1100
- C . N2200
- D . N1500
Based on the graphic, which command should be used on the Dell EMC N-Series Layer 2 switch to allow both client computers to receive a dynamic IP address?

- A . Console(config)# ip redirects
- B . Console(config)# service dhcp
- C . Console(config)# ip helper-address 192.168.100.250
- D . Console(config)# service-policy in dhcp_250
Which technologies can be implemented when configuring policy-based routing?
- A . Policy-maps, Extended ACLs, and MAC ACLs
- B . Policy-maps, Route-maps, and Extended ACLs
- C . Route-maps, Extended ACLs, and MAC ACLs
- D . Route-maps, Policy-maps, and MAC ACLs
What describes the operation of a VRRP router in a backup state?
- A . Does not reply to ARP requests
- B . Receives packets with the virtual MAC address as the destination
- C . Sends keepalive messages to the Master router
- D . Accepts and processes packets with the virtual router IP address