CompTIA N10-009 Practice Exams
Last updated on Nov 16,2026- Exam Code: N10-009
- Exam Name: CompTIA Network+ Certification
- Certification Provider: CompTIA
- Latest update: Nov 16,2026
Which of the following is most commonly associated with many systems sharing one IP address in the public IP-addressing space?
- A . PAT
- B . NAT
- C . VIP
- D . NAT64
A
Explanation:
Port Address Translation (PAT) allows multiple internal devices to share a single public IP address by assigning each device a unique port number. This is the most common method used in environments where many systems need internet access but there are limited public IP addresses.
Which of the following provides an opportunity for an on-path attack?
- A . Phishing
- B . Dumpster diving
- C . Evil twin
- D . Tailgating
C
Explanation:
An evil twin is a rogue Wi-Fi access point that mimics a legitimate network. Attackers use it to intercept and manipulate traffic, making it an on-path (formerly MITM) attack opportunity.
Breakdown of Options:
A network administrator is connecting two Layer 2 switches in a network. These switches must transfer data in multiple networks.
Which of the following would fulfill this requirement?
- A . Jumbo frames
- B . 802.1Q tagging
- C . Native VLAN
- D . Link aggregation
B
Explanation:
Which of the following best describes the transmission format that occurs at the transport layer over connectionless communication?
- A . Datagram
- B . Segment
- C . Frames
- D . Packets
A
Explanation:
At the transport layer, connectionless communication is typically handled using the User Datagram Protocol (UDP), which transmits data in units called datagrams. Unlike TCP, UDP does not establish a connection before sending data and does not guarantee delivery, making datagrams the correct term for the transmission format in this context.
Reference: CompTIA Network+ Exam Objectives and official study guides.
After running a Cat 8 cable using passthrough plugs, an electrician notices that connected cables are experiencing a lot of cross talk.
Which of the following troubleshooting steps should the electrician take first?
- A . Inspect the connectors for any wires that are touching or exposed.
- B . Restore default settings on the connected devices.
- C . Terminate the connections again.
- D . Check for radio frequency interference in the area.
A
Explanation:
Cross talk can often be caused by improper termination of cables. The first step in troubleshooting should be to inspect the connectors for any wires that might be touching or exposed. Ensuring that all wires are correctly seated and that no conductors are exposed can help reduce or eliminate cross talk. This step should be taken before attempting to re-terminate the connections or check for other sources of interference.
Reference: CompTIA Network+ study materials.
Which of the following best explains the role of confidentiality with regard to data at rest?
- A . Datacanbe accessedby anyone on the administrative network.
- B . Datacanbe accessedremotely with proper training.
- C . Datacanbe accessedafter privileged access Is granted.
- D . Datacanbe accessedafter verifying the hash.
C
Explanation:
Confidentiality with Data at Rest: Confidentiality is a core principle of data security, ensuring that data stored (at rest) is only accessible to authorized individuals. This protection is achieved through mechanisms such as encryption, access controls, and permissions.
Privileged Access: The statement "Data can be accessed after privileged access is granted" aligns with the confidentiality principle, as it restricts data access to users who have been granted specific permissions or roles. Only those with the appropriate credentials or permissions can access the data. Incorrect Options:
Which of the following is used to describe the average duration of an outage for a specific service?
- A . RPO
- B . MTTR
- C . RTO
- D . MTBF
B
Explanation:
MTTR (Mean Time to Repair) is the average time it takes to repair a system or service after a failure.
It helps in measuring the downtime and planning recovery processes.
After providing a username and password, a user must input a passcode from a phone application.
Which of the following authentication technologies is used in this example?
- A . SSO
- B . LDAP
- C . MFA
- D . SAML
C
Explanation:
Comprehensive and Detailed
This is an example of Multi-Factor Authentication (MFA) because it requires:
Something you know (username/password)
Something you have (a phone-generated passcode)
Breakdown of Options:
After providing a username and password, a user must input a passcode from a phone application.
Which of the following authentication technologies is used in this example?
- A . SSO
- B . LDAP
- C . MFA
- D . SAML
C
Explanation:
Comprehensive and Detailed
This is an example of Multi-Factor Authentication (MFA) because it requires:
Something you know (username/password)
Something you have (a phone-generated passcode)
Breakdown of Options:
A network manager wants to implement a SIEM system to correlate system events.
Which of the following protocols should the network manager verify?
- A . NTP
- B . DNS
- C . LDAP
- D . DHCP
A
Explanation:
Role of NTP (Network Time Protocol):
NTP is used to synchronize the clocks of network devices to a reference time source. Accurate time synchronization is critical for correlating events and logs from different systems. Importance for SIEM Systems:
Event Correlation: SIEM (Security Information and Event Management) systems collect and analyze log data from various sources. Accurate timestamps are essential for correlating events across multiple systems.
Time Consistency: Without synchronized time, it is challenging to piece together the sequence of events during an incident, making forensic analysis difficult. Comparison with Other Protocols:
DNS (Domain Name System): Translates domain names to IP addresses but is not related to time synchronization.
LDAP (Lightweight Directory Access Protocol): Used for directory services, such as user authentication and authorization.
DHCP (Dynamic Host Configuration Protocol): Assigns IP addresses to devices on a network but does
not handle time synchronization.
Implementation:
Ensure that all network devices, servers, and endpoints are synchronized using NTP. This can be achieved by configuring devices to use an NTP server, which could be a local server or an external time source.
Reference: CompTIA Network+ study materials on network protocols and SIEM systems.