CompTIA N10-009 Practice Exams
Last updated on Nov 16,2026- Exam Code: N10-009
- Exam Name: CompTIA Network+ Certification
- Certification Provider: CompTIA
- Latest update: Nov 16,2026
A network engineer needs to order cabling to connect two buildings within the same city.
Which of the following media types should the network engineer use?
- A . Coaxial
- B . Twinaxial
- C . Single-mode fiber
- D . Cat 5
C
Explanation:
Single-mode fiber is best suited for long-distance communication, often exceeding 10 km (6.2 miles). It’s immune to EMI and offers high bandwidth ― making it the ideal choice for connecting buildings across a city.
Coaxial (A) and Twinaxial (B) are used for shorter distances and specific use cases (e.g., storage or legacy systems).
Cat 5 (D) is limited to 100 meters and is not suitable for city-level interconnects.
✅ For long-distance, high-speed, and reliable communication between buildings, Single-mode fiber is the professional choice.
Reference: CompTIA Network+ N10-009 Official Study Guide ― Objective 3.4: "Summarize the properties and purposes of physical network topologies and network types."
Which of the following is used to estimate the average life span of a device?
- A . RTO
- B . RPO
- C . MTBF
- D . MTTR
C
Explanation:
Understanding MTBF:
Mean Time Between Failures (MTBF): A reliability metric that estimates the average time between successive failures of a device or system.
Calculation and Importance:
Calculation: MTBF is calculated as the total operational time divided by the number of failures during that period.
Usage: Used by manufacturers and engineers to predict the lifespan and reliability of a device, helping in maintenance planning and lifecycle management.
Comparison with Other Metrics:
RTO (Recovery Time Objective): The maximum acceptable time to restore a system after a failure.
RPO (Recovery Point Objective): The maximum acceptable amount of data loss measured in time.
MTTR (Mean Time to Repair): The average time required to repair a device or system and return it to operational status.
Application:
MTBF is crucial for planning maintenance schedules, spare parts inventory, and improving the overall reliability of systems.
Reference: CompTIA Network+ study materials on reliability and maintenance metrics.
Which of the following is used to estimate the average life span of a device?
- A . RTO
- B . RPO
- C . MTBF
- D . MTTR
C
Explanation:
Understanding MTBF:
Mean Time Between Failures (MTBF): A reliability metric that estimates the average time between successive failures of a device or system.
Calculation and Importance:
Calculation: MTBF is calculated as the total operational time divided by the number of failures during that period.
Usage: Used by manufacturers and engineers to predict the lifespan and reliability of a device, helping in maintenance planning and lifecycle management.
Comparison with Other Metrics:
RTO (Recovery Time Objective): The maximum acceptable time to restore a system after a failure.
RPO (Recovery Point Objective): The maximum acceptable amount of data loss measured in time.
MTTR (Mean Time to Repair): The average time required to repair a device or system and return it to operational status.
Application:
MTBF is crucial for planning maintenance schedules, spare parts inventory, and improving the overall reliability of systems.
Reference: CompTIA Network+ study materials on reliability and maintenance metrics.
Which of the following is used to estimate the average life span of a device?
- A . RTO
- B . RPO
- C . MTBF
- D . MTTR
C
Explanation:
Understanding MTBF:
Mean Time Between Failures (MTBF): A reliability metric that estimates the average time between successive failures of a device or system.
Calculation and Importance:
Calculation: MTBF is calculated as the total operational time divided by the number of failures during that period.
Usage: Used by manufacturers and engineers to predict the lifespan and reliability of a device, helping in maintenance planning and lifecycle management.
Comparison with Other Metrics:
RTO (Recovery Time Objective): The maximum acceptable time to restore a system after a failure.
RPO (Recovery Point Objective): The maximum acceptable amount of data loss measured in time.
MTTR (Mean Time to Repair): The average time required to repair a device or system and return it to operational status.
Application:
MTBF is crucial for planning maintenance schedules, spare parts inventory, and improving the overall reliability of systems.
Reference: CompTIA Network+ study materials on reliability and maintenance metrics.
A support agent receives a report that a remote user’s wired devices are constantly disconnecting and have slow speeds. Upon inspection, the support agent sees that the user’s coaxial modern has a signal power of -97dB.
- A . Removing any spliters connecte to the line
- B . Switching the devices to wireless
- C . Moving the devices closer to the modern
- D . Lowering the network speed
A
Explanation:
A signal power of -97dB indicates a very weak signal, which can cause connectivity issues and slow speeds. Splitters on a coaxial line can degrade the signal quality further, so removing them can help improve the signal strength and overall connection quality.
Signal Quality: Splitters can reduce the signal strength by dividing the signal among multiple lines, which can be detrimental when the signal is already weak.
Direct Connection: Ensuring a direct connection from the modem to the incoming line can maximize signal quality and reduce potential points of failure. Network
Reference: CompTIA Network+ N10-007 Official Certification Guide: Discusses troubleshooting connectivity issues and the impact of signal strength on network performance.
Cisco Networking Academy: Provides insights on maintaining optimal signal quality in network setups.
Network+ Certification All-in-One Exam Guide: Covers common network issues, including those related to signal degradation and ways to mitigate them.
Two companies successfully merged. Following the merger, a network administrator identified a connection bottleneck. The newly formed company plans to acquire a high-end 40GB switch and redesign the network from a three-tier model to a collapsed core.
Which of the following should the administrator do until the new devices are acquired?
- A . Implement the FHRP.
- B . Configure a route selection metric change.
- C . Install a load balancer.
- D . Enable link aggregation.
D
Explanation:
• The issue described is a network bottleneck due to increased traffic after a merger.
• A collapsed core architecture consolidates the core and distribution layers into a single layer to improve efficiency and reduce latency.
• Until the 40GB switch is acquired, Link Aggregation (LAG) (IEEE 802.3ad / LACP) can be used to combine multiple physical links into a single logical link, increasing bandwidth and reducing bottlenecks.
• FHRP (First Hop Redundancy Protocol) (A) is used for gateway redundancy, not link aggregation.
• Route selection metric changes (B) help with routing decisions but don’t address physical link congestion.
• Load balancers (C) distribute traffic for applications, not network links.
Reference: CompTIA Network+ N10-009 Official Documentation C Network Architecture and Performance Optimization.
Two companies successfully merged. Following the merger, a network administrator identified a connection bottleneck. The newly formed company plans to acquire a high-end 40GB switch and redesign the network from a three-tier model to a collapsed core.
Which of the following should the administrator do until the new devices are acquired?
- A . Implement the FHRP.
- B . Configure a route selection metric change.
- C . Install a load balancer.
- D . Enable link aggregation.
D
Explanation:
• The issue described is a network bottleneck due to increased traffic after a merger.
• A collapsed core architecture consolidates the core and distribution layers into a single layer to improve efficiency and reduce latency.
• Until the 40GB switch is acquired, Link Aggregation (LAG) (IEEE 802.3ad / LACP) can be used to combine multiple physical links into a single logical link, increasing bandwidth and reducing bottlenecks.
• FHRP (First Hop Redundancy Protocol) (A) is used for gateway redundancy, not link aggregation.
• Route selection metric changes (B) help with routing decisions but don’t address physical link congestion.
• Load balancers (C) distribute traffic for applications, not network links.
Reference: CompTIA Network+ N10-009 Official Documentation C Network Architecture and Performance Optimization.
A customer recently moved into a new office and notices that some wall plates are not working and are not properly labeled.
Which of the following tools would be best to identify the proper wiring in the IDF?
- A . Toner and probe
- B . Cable tester
- C . Visual fault locator
- D . Network tap
A
Explanation:
A toner and probe tool, also known as a tone generator and probe, is used to trace and identify individual cables within a bundle or to locate the termination points of cables in wiring closets and patch panels. It generates a tone that can be picked up by the probe, helping technicians quickly and accurately identify and label wall plates and wiring. This is the best tool for identifying proper wiring in the Intermediate Distribution Frame (IDF).
Reference: CompTIA Network+ Exam Objectives and official study guides.
Which of the following dynamic routing protocols is used on the internet?
- A . EIGRP
- B . BGP
- C . RIP
- D . OSPF
B
Explanation:
BGP (Border Gateway Protocol) is the only dynamic routing protocol used across the internet. It’s classified as an Exterior Gateway Protocol (EGP), responsible for routing between different autonomous systems (ASes).
Which of the following connectors provides console access to a switch?
- A . ST
- B . RJ45
- C . BNC
- D . SFP
B
Explanation:
Console Access:
Purpose: Console access to a switch allows administrators to configure and manage the device directly. This is typically done using a terminal emulator program on a computer.
RJ45 Connector:
Common Use: The RJ45 connector is widely used for Ethernet cables and also for console connections to network devices like switches and routers.
Console Cables: Console cables often have an RJ45 connector on one end (for the switch) and a DB9 serial connector on the other end (for the computer).
Comparison with Other Connectors:
ST (Straight Tip): A fiber optic connector used for networking, not for console access.
BNC (Bayonet Neill-Concelman): A connector used for coaxial cable, typically in older network setups and not for console access.
SFP (Small Form-factor Pluggable): A modular transceiver used for network interfaces, not for console access.
Practical Application:
Connection Process: Connect the RJ45 end of the console cable to the console port of the switch. Connect the DB9 end (or USB via adapter) to the computer. Use a terminal emulator (e.g., PuTTY, Tera Term) to access the switch’s command-line interface (CLI).
Reference: CompTIA Network+ study materials on network devices and connectors.