CompTIA N10-009 Practice Exams
Last updated on Nov 16,2026- Exam Code: N10-009
- Exam Name: CompTIA Network+ Certification
- Certification Provider: CompTIA
- Latest update: Nov 16,2026
Which of the following steps of the troubleshooting methodology should a technician take to confirm a theory?
- A . Duplicate the problem.
- B . Identify the symptoms.
- C . Gather information.
- D . Determine any changes.
A
Explanation:
Troubleshooting Methodology:
Troubleshooting involves a systematic approach to diagnosing and resolving issues. It typically includes steps such as identifying symptoms, gathering information, formulating and testing theories, and implementing solutions.
Confirming a Theory:
Duplicate the Problem: To confirm a theory, the technician should reproduce the problem in a controlled environment. This helps verify that the identified cause actually leads to the observed issue.
Verification: By duplicating the problem, the technician can observe the issue firsthand, validate the hypothesis, and rule out other potential causes.
Comparison with Other Steps:
Identify the Symptoms: Initial step to understand what the problem is, not specifically for confirming a theory.
Gather Information: Involves collecting data and details about the issue, usually done before formulating a theory.
Determine Any Changes: Involves checking for recent changes that could have caused the issue, a part of the information-gathering phase.
Implementation:
Use similar equipment or software in a test environment to recreate the issue.
Observe the results to see if they match the original problem, thereby confirming the theory.
Reference: CompTIA Network+ study materials on troubleshooting methodologies and best practices.
A network administrator needs to change where the outside DNS records are hosted.
Which of the following records should the administrator change the registrar to accomplish this task?
- A . NS
- B . SOA
- C . PTR
- D . CNAME
A
Explanation:
To change where the outside DNS records are hosted, the network administrator needs to update the NS (Name Server) records at the domain registrar. NS records specify the authoritative name servers for a domain, directing where DNS queries should be sent.
NS (Name Server) Records: These records indicate the servers that are authoritative for a domain.
Changing the NS records at the registrar points DNS resolution to the new hosting provider. SOA (Start of Authority): Contains administrative information about the domain, including the primary name server.
PTR (Pointer) Records: Used for reverse DNS lookups, mapping IP addresses to domain names.
CNAME (Canonical Name) Records: Used to alias one domain name to another, not relevant for changing DNS hosting.
Network
Reference: CompTIA Network+ N10-007 Official Certification Guide: Discusses DNS records, their purposes, and how to manage them.
Cisco Networking Academy: Provides training on DNS management and the role of different DNS record types.
Network+ Certification All-in-One Exam Guide: Explains DNS records and their configuration for domain management.
A company reports that their facsimile machine no longer has a dial tone when trying to send a fax. The phone cable is damaged on one end.
Which of the following types of connectors should a technician replace?
- A . F-type
- B . RJ45
- C . SC
- D . RJ11
D
Explanation:
Fax machines use analog phone lines, which are connected using RJ11 connectors. These are standard telephone connectors with 4 or 6 positions and are used for POTS (Plain Old Telephone Service) lines.
F-type is used for coaxial cables (e.g., TV and cable modems).
RJ45 is used for Ethernet network connections.
SC (Subscriber Connector) is used for fiber optic connections, not analog telephone lines.
Reference: CompTIA Network+ N10-009 Official Objectives: 2.4 C Compare and contrast common network connectors.
Which of the following protocols is used to route traffic on the public internet?
- A . BGP
- B . OSPF
- C . EIGRP
- D . RIP
A
Explanation:
Comprehensive and Detailed
Border Gateway Protocol (BGP) is the primary protocol used to route traffic on the public internet. It allows ISPs and large networks to exchange routing information, making it an Exterior Gateway Protocol (EGP).
Breakdown of Options:
Which of the following protocols is used to route traffic on the public internet?
- A . BGP
- B . OSPF
- C . EIGRP
- D . RIP
A
Explanation:
Comprehensive and Detailed
Border Gateway Protocol (BGP) is the primary protocol used to route traffic on the public internet. It allows ISPs and large networks to exchange routing information, making it an Exterior Gateway Protocol (EGP).
Breakdown of Options:
A network engineer is completing a wireless installation in a new building. A requirement is that all clients be able to automatically connect to the fastest supported network.
Which of the following best supports this requirement?
- A . Enabling band steering
- B . Disabling the 5GHz SSID
- C . Adding a captive portal
- D . Configuring MAC filtering
A
Explanation:
Band steering is a feature in wireless networks that encourages dual-band capable devices to connect to the 5GHz band instead of the 2.4GHz band.
Why Band Steering?
The 5GHz band supports higher speeds and less interference compared to 2.4GHz.
If a device supports both bands, the access point (AP) can "steer" it to connect to 5GHz instead of
A network administrator is configuring a new switch and wants to ensure that only assigned devices can connect to the switch.
Which of the following should the administrator do?
- A . Configure ACLs.
- B . Implement a captive portal.
- C . Enable port security.
- D . Disable unnecessary services.
C
Explanation:
Reference: CompTIA Network+ Certification Exam Objectives – Network Security section.
An organization requires the ability to send encrypted email messages to a partner from an email server that is hosted on premises. The organization prefers to use the standard default ports when creating firewall rules.
Which of the following ports should be open to satisfy the requirements?
- A . 110
- B . 143
- C . 587
- D . 636
C
Explanation:
Port 587 is the standard default port for sending email (SMTP) with TLS encryption, which is used to secure email transmissions between mail servers or between clients and mail servers. Allowing traffic over port 587 enables secure email sending while maintaining standard protocol usage. (Reference: CompTIA Network+ Study Guide, Chapter on Ports and Protocols)
Which of the following connectors allows a singular QSFP transceiver to have several physical connections?
- A . RJ45
- B . ST
- C . LC
- D . MPO
D
Explanation:
The MPO (Multi-fiber Push On) connector is designed to handle multiple fiber strands in a single connector, and it is commonly used with high-density transceivers like QSFP (Quad Small Form-factor Pluggable).
QSFP can support up to four channels (hence "quad"), and MPO connectors can interface multiple fibers (e.g., 8, 12, 24), making them ideal for 40Gbps or 100Gbps deployments. RJ45 (A) is used for Ethernet over copper.
ST (B) and LC (C) are single-fiber connectors ― they don’t support the multi-fiber needs of QSFP setups.
✅ Therefore, MPO is the correct connector type for this use case.
Reference: CompTIA Network+ N10-009 Official Study Guide ― Objective 3.1: "Compare and contrast different types of connectors and transceivers."
In an environment with one router, which of the following will allow a network engineer to communicate between VLANs without purchasing additional hardware?
- A . Subinterfaces
- B . VXLAN
- C . Layer 3 switch
- D . VIR
A
Explanation:
A subinterface is a logical interface created on a single physical router interface that allows routing between VLANs (known as Router-on-a-Stick (ROAS)). This method is commonly used when only one physical router is available, allowing inter-VLAN communication without additional hardware.
• Why not the other options?
• VXLAN (B) C This is used for extending Layer 2 networks over a Layer 3 infrastructure, primarily in data centers. It does not directly enable inter-VLAN communication.
• Layer 3 switch (C) C A Layer 3 switch can route between VLANs, but the scenario states that purchasing additional hardware is not an option.
• VIR (D) C This is not a standard networking term in the context of VLAN communication.
Reference: CompTIA Network+ (N10-009) Official Guide C Chapter 8: VLANs and Inter-VLAN Routing