CompTIA N10-009 Practice Exams
Last updated on Nov 16,2026- Exam Code: N10-009
- Exam Name: CompTIA Network+ Certification
- Certification Provider: CompTIA
- Latest update: Nov 16,2026
A network administrator notices interference with industrial equipment in the 2.4GHz range.
Which of the following technologies would most likely mitigate this issue? (Select two).
- A . Mesh network
- B . 5GHz frequency
- C . Omnidirectional antenna
- D . Non-overlapping channel
- E . Captive portal
- F . Ad hoc network
B
Explanation:
Understanding 2.4GHz Interference:
The 2.4GHz frequency range is commonly used by many devices, including Wi-Fi, Bluetooth, and various industrial equipment. This can lead to interference and degraded performance.
Mitigation Strategies:
5GHz Frequency:
The 5GHz frequency band offers more channels and less interference compared to the 2.4GHz band. Devices operating on 5GHz are less likely to encounter interference from other devices, including industrial equipment.
Non-overlapping Channels:
In the 2.4GHz band, using non-overlapping channels (such as channels 1, 6, and 11) can help reduce interference. Non-overlapping channels do not interfere with each other, providing clearer communication paths for Wi-Fi signals.
Why Other Options are Less Effective:
Mesh Network: While useful for extending network coverage, a mesh network does not inherently address interference issues.
Omnidirectional Antenna: This type of antenna broadcasts signals in all directions but does not mitigate interference.
Captive Portal: A web page that users must view and interact with before accessing a network, unrelated to frequency interference.
Ad Hoc Network: A decentralized wireless network that does not address interference issues directly.
Implementation:
Switch Wi-Fi devices to the 5GHz band if supported by the network infrastructure and client devices.
Configure Wi-Fi access points to use non-overlapping channels within the 2.4GHz band to minimize
interference.
Reference: CompTIA Network+ study materials on wireless networking and interference mitigation.
Which of the following disaster recovery metrics is used to describe the amount of data that is lost since the last backup?
- A . MTTR
- B . RTO
- C . RPO
- D . MTBF
C
Explanation:
Definition of RPO:
Recovery Point Objective (RPO) is a disaster recovery metric that describes the maximum acceptable amount of data loss measured in time. It indicates the point in time to which data must be recovered to resume normal operations after a disaster.
For example, if the RPO is set to 24 hours, then the business could tolerate losing up to 24 hours’ worth of data in the event of a disruption.
Why RPO is Important:
RPO is critical for determining backup frequency and helps businesses decide how often they need to back up their data. A lower RPO means more frequent backups and less potential data loss. Comparison with Other Metrics:
MTTR (Mean Time to Repair): Refers to the average time required to repair a system or component and return it to normal operation.
RTO (Recovery Time Objective): The maximum acceptable length of time that a computer, system, network, or application can be down after a failure or disaster occurs.
MTBF (Mean Time Between Failures): The predicted elapsed time between inherent failures of a system during operation.
How RPO is Used in Disaster Recovery:
Organizations establish RPOs to ensure that they can recover data within a timeframe that is
acceptable to business operations. This involves creating a backup plan that meets the RPO
requirements.
Reference: CompTIA Network+ study materials and certification guides.
A network administrator needs to fail over services to an off-site environment. This process will take four weeks to become fully operational.
Which of the following DR (Disaster Recovery) concepts does this describe?
- A . Hot site
- B . Warm site
- C . Cold site
- D . Active-active approach
C
Explanation:
A cold site is a backup facility that provides infrastructure (such as power, cooling, and space) but does not have active IT resources installed. When a disaster occurs, IT teams must bring in and configure all necessary hardware and software before services can resume. This process can take weeks or longer―which matches the scenario described.
• Why not the other options?
• Hot site (A) C A hot site is a fully operational backup facility with up-to-date data and pre-configured hardware, allowing almost instant failover (minutes to hours).
• Warm site (B) C A warm site has pre-installed hardware and some software/configurations, but it requires some setup before becoming fully operational (hours to a few days).
• Active-active approach (D) C This means that multiple sites run simultaneously with load balancing,
ensuring no downtime in case of a failure.
Reference: CompTIA Network+ (N10-009) Official Guide C Chapter 15: Business Continuity and Disaster Recovery
A network administrator needs to fail over services to an off-site environment. This process will take four weeks to become fully operational.
Which of the following DR (Disaster Recovery) concepts does this describe?
- A . Hot site
- B . Warm site
- C . Cold site
- D . Active-active approach
C
Explanation:
A cold site is a backup facility that provides infrastructure (such as power, cooling, and space) but does not have active IT resources installed. When a disaster occurs, IT teams must bring in and configure all necessary hardware and software before services can resume. This process can take weeks or longer―which matches the scenario described.
• Why not the other options?
• Hot site (A) C A hot site is a fully operational backup facility with up-to-date data and pre-configured hardware, allowing almost instant failover (minutes to hours).
• Warm site (B) C A warm site has pre-installed hardware and some software/configurations, but it requires some setup before becoming fully operational (hours to a few days).
• Active-active approach (D) C This means that multiple sites run simultaneously with load balancing,
ensuring no downtime in case of a failure.
Reference: CompTIA Network+ (N10-009) Official Guide C Chapter 15: Business Continuity and Disaster Recovery
A company’s marketing team created a new application and would like to create a DNS record for newapplication.comptia.org that always resolves to the same address as www.comptia.org.
Which of the following records should the administrator use?
- A . SOA
- B . MX
- C . CNAME
- D . NS
C
Explanation:
A CNAME (Canonical Name) record is used in DNS to alias one domain name to another. This means that newapplication.comptia.org can be made to resolve to the same IP address as www.comptia.org by creating a CNAME record pointing newapplication.comptia.org to www.comptia.org. SOA (Start of Authority) is used for DNS zone information, MX (Mail Exchange) is for mail server records, and NS (Name Server) is for specifying authoritative DNS servers.
Reference: The DNS section of the CompTIA Network+ materials describes the use of CNAME records for creating domain aliases.
A network architect needs to create a wireless field network to provide reliable service to public safety vehicles.
Which of the following types of networks is the best solution?
- A . Mesh
- B . Ad hoc
- C . Point-to-point
- D . Infrastructure
A
Explanation:
A mesh network is the best solution for providing reliable wireless service to public safety vehicles. In a mesh network, each node (vehicle) can connect to multiple other nodes, providing multiple paths for data to travel. This enhances reliability and redundancy, ensuring continuous connectivity even if one or more nodes fail. Mesh networks are highly resilient and are well-suited for dynamic and mobile environments such as public safety operations.
Reference: CompTIA Network+ study materials.
Network administrators are using the Telnet protocol to administer network devices that are on the 192.168.1.0/24 subnet.
Which of the following tools should the administrator use to best identify the devices?
- A . dig
- B . runap
- C . tracert
- D . telnet
D
Explanation:
Telnet: Telnet is a protocol used to establish remote connections to devices for administration. It directly communicates with devices on the network and is the best tool for identifying and accessing devices that support it on the subnet.
dig (A): Used for DNS queries, unrelated to Telnet.
runap (B): Not a recognized tool in this context.
tracert (C): Tracks the path to a host but does not establish direct connections.
Reference: CompTIA Network+ Official Study Guide, Domain 2.2 (Remote Access Methods).
A network administrator determines that some switch ports have more errors present than expected. The administrator traces the cabling associated with these ports.
Which of the following would most likely be causing the errors?
- A . arp
- B . tracert
- C . nmap
- D . ipconfig
A data center interconnect using a VXLAN was recently implemented. A network engineer observes slow performance and fragmentation on the interconnect.
Which of the following technologies will resolve the issue?
- A . 802.1Q tagging
- B . Spanning tree
- C . Link aggregation
- D . Jumbo frames
D
Explanation:
Comprehensive and Detailed
VXLAN (Virtual Extensible LAN) encapsulates Ethernet frames inside UDP packets, increasing packet size. This can lead to fragmentation and performance degradation unless Jumbo Frames are enabled.
Breakdown of Options:
A data center interconnect using a VXLAN was recently implemented. A network engineer observes slow performance and fragmentation on the interconnect.
Which of the following technologies will resolve the issue?
- A . 802.1Q tagging
- B . Spanning tree
- C . Link aggregation
- D . Jumbo frames
D
Explanation:
Comprehensive and Detailed
VXLAN (Virtual Extensible LAN) encapsulates Ethernet frames inside UDP packets, increasing packet size. This can lead to fragmentation and performance degradation unless Jumbo Frames are enabled.
Breakdown of Options: