Cisco 300-620 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-620
- Exam Name: Implementing Cisco Application Centric Infrastructure (DCACI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
How is an EPG extended outside of the ACI fabric?
- A . Create an external bridged network that is assigned to a leaf port.
- B . Create an external routed network that is assigned to an EPG.
- C . Enable unicast routing within an EPG.
- D . Statically assign a VLAN ID to a leaf port in an EPG.
D
Explanation:
An EPG is extended outside of the ACI fabric by statically assigning a VLAN ID to a leaf port in an EPG. This method maps the traffic received on the leaf port to the EPG, and the policy for this EPG is enforced
Reference: https://www.dclessons.com/l2-external-network-with-aci
How is broadcast forwarded in Cisco ACI Multi-Pod after ARP flooding is enabled?
- A . Ingress replication is used on the spines to forward broadcast frames in the IPN infrastructure.
- B . Within a pod, the ingress leaf switch floods the broadcast frame on all fabric ports.
- C . Broadcast frames are forwarded inside the pod and across the IPN using the multicast address that is associated to the bridge domain.
- D . For the specific bridge domain, all spines forward the broadcast frames to IPN routers.
C
Explanation:
After ARP flooding is enabled in Cisco ACI Multi-Pod, broadcast frames are forwarded within the pod and across the Inter-Pod Network (IPN) using the multicast address associated with the bridge domain. If the setting is ‘Flood’, the leaf switch floods to the Group IP (GIPo) multicast group allocated for the bridge domain, ensuring that both local and remote pods receive a flooded copy
A network engineer configures the Cisco ACI fabric to connect to vCenter with these requirements:
• Port groups must be automatically created on the distributed virtual switch.
• Port groups must use the VLAN allocation in the range between 20-30.
• The deployment must optimize the CAM space on the leaf switches.
Which set of actions meets these criteria?
- A . Create a dynamic VLAN pool with the VLAN range of 20-30.
Create a VMM domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to On Demand. - B . Create a dynamic VLAN pool with the VLAN range of 20-30.
Create a physical domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to On Demand. - C . Create a static VLAN pool with the VLAN range of 20-30.
Create a physical domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to Immediate. - D . Create a static VLAN pool with the VLAN range of 20-30.
Create a VMM domain and associate it with the VLAN pool.
Create the EPG and associate the domain.
Set the deployment immediacy to Immediate.
A
Explanation:
To meet the criteria for configuring the Cisco ACI fabric to connect to vCenter, the following actions should be taken:
Create a dynamic VLAN pool with the VLAN range of 20-30: This step involves creating a VLAN pool that dynamically assigns VLANs within the specified range to the port groups as they are created1.
Create a VMM domain and associate it with the VLAN pool: The VMM domain is a representation of the VMware vSphere Distributed Switch (VDS) in ACI, and associating it with the VLAN pool allows for the automatic creation of port groups on the VDS1.
Create the EPG and associate the domain: An Endpoint Group (EPG) is a logical entity to which workloads are attached. Associating the EPG with the VMM domain ensures that the port groups are automatically created in vCenter when the EPG is associated with a VMM domain1.
Set the deployment immediacy to On Demand: Setting the deployment immediacy to ‘On Demand’ optimizes the CAM space on the leaf switches by deploying policies to leaf nodes only when endpoints assigned to this EPG are connected, rather than immediately upon configuration12.
By following these steps, the network engineer can ensure that the Cisco ACI fabric is correctly configured to connect to vCenter, with port groups being automatically created on the distributed
virtual switch, using the VLAN allocation in the range between 20-30, and optimizing the CAM space on the leaf switches.
Which method does the Cisco ACI fabric use to load-balance multidestination traffic?
- A . PIM routing
- B . spanning trees
- C . shortest-path trees
- D . forwarding tag trees
D
Explanation:
The method that the Cisco ACI fabric uses to load-balance multidestination traffic is forwarding tag trees3. This method involves assigning a forwarding tag (FTAG) to the traffic when it is forwarded within the fabric, ensuring efficient load balancing of multi-destination traffic3.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals/b_ACI-Fundamentals_chapter_010010.html

An engineer wants to configure Cisco ACI switches to use authenticated ZMQ when communicating with the proxy spine.
Which configuration allows MD5 ZMQ messages only?
- A . IS-IS password using MD5
- B . COOP Group policy in strict mode
- C . COOP Group policy in compatible mode
- D . BGP password using MD5
B
Explanation:
https://www.cisco.com/c/en/us/td/docs/dcn/aci/apic/5x/security-configuration/cisco-apic-security-configuration-guide-release-52x/protocol-authentication-52x.html
A Cisco ACI bridge domain and VRF are configured with a default data-plane learning configuration.
Which two endpoint attributes are programmed in the leaf switch when receiving traffic? (Choose two.)
- A . Remote MAC. IP
- B . Remote Subnet
- C . Local IP, not MAC
- D . Local MAC, IP
- E . Local Subnet
- F . Remote IP
D, E
Explanation:
In a Cisco ACI bridge domain and VRF configured with a default data-plane learning configuration, the two endpoint attributes that are programmed in the leaf switch when receiving traffic are:
Local MAC, IP (Option D)5.
Local Subnet (Option E)5. These attributes are learned by the ACI fabric through common network methods such as ARP, GARP, and ND, as well as through the data-plane. The local MAC and IP addresses are learned and used for traffic routing and bridging, while the local subnet information is used for traffic optimization and endpoint location tracking56.
An engineer must attach an ESXi host to the Cisco ACI fabric. The host is connected to Leaf 1 and has its gateway IP address 10.10.10.254/24 configured inside the ACI fabric. A new wall is attached to Leaf 2 and mapped to the same EPG and BD as the ESXi host. The engineer must migrate the gateway of the ESXi host to the firewall.
Which configuration set complishes this goal?
- A . Disable unicast routing.
Configure IP address 10.10.10.254/24 on the ACI BD. - B . Enable unicast routing.
Configure IP address 10.10.10.254/24 on the ACI EPG. - C . Disable unicast routing.
Define IP address 10.10.10.254/24 on the firewall. - D . Enable unicast routing.
Set IP address 10.10.10.254/24 on the firewall.
An engineer wants to filter the System Faults page and view only the active faults that are present in the Cisco ACI fabric.
Which two lifecycle stages must be selected for filtering? (Choose two.)
- A . Raised
- B . Retaining
- C . Soaking, Clearing
- D . Raised, Clearing
- E . Soaking
A, D
Explanation:
To filter the System Faults page and view only the active faults present in the Cisco ACI fabric, the two lifecycle stages that must be selected for filtering are:
Raised (Option A): This stage indicates that the fault is currently active and has been raised.
Raised, Clearing (Option D): This combination indicates that the fault is active but is in the process of being cleared.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/faults/guide/b_APIC_Faults_Errors/b_IFC_Faults_Errors_chapter_01.html
An engineer must limit management access to me Cisco ACI fabric that originates from a single subnet where the NOC operates. Access should be limited to SSH and HTTPS only.
Where should the policy be configured on the Cisco APIC to meet the requirements?
- A . policy In the management tenant
- B . policy on the management VLAN
- C . ACL on the management interface of the APIC
- D . ACL on the console interface
A
Explanation:
To limit management access to the Cisco ACI fabric that originates from a single subnet where the NOC operates, the policy should be configured in the management tenant on the Cisco APIC5.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_0111.html
Refer to the exhibit. VM1 and VM2 are in Cisco ACI POD1 and communication takes place.
Which event is triggered when VM2 is live migrated from POD1 to POD2?
- A . Leaf 102 installs a bounce entry for VM2 pointing to the PTEP address of leaf 201.
- B . Leaf 201 creates a tunnel with leaf 102 because of the bounced traffic that is destined to VM2.
- C . Spines from POD2 send an MP-BGP EVPN update to the leaves in POD1 about the new location of VM2.
- D . An MP-BGP EVPN update is received by spines in POD1 announcing the reachability of VM2 via the proxy VTEP address of the spines in POD2.
C
Explanation:
When VM2 is live migrated from POD1 to POD2, the spines in POD2 will send an MP-BGP EVPN update to the leaves in POD1. This update informs the leaves in POD1 about the new location of VM2, allowing them to update their forwarding tables and ensure that traffic destined for VM2 is correctly routed to its new location in POD2.