Cisco 300-610 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-610
- Exam Name: Designing Cisco Data Center Infrastructure (DCID)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
To help automate the vHBA configuration process, a network engineer is configuring vHBA template pairs on UCS. The engineer is creating primary and secondary templates to define how vHBAs on a server connect to the SAN.
Which fact about the template pair should the engineer consider for its potential impact on service?
- A . The QoS policy configuration will not be shared between the two templates.
- B . The description configuration will be shared between the two templates.
- C . The WWPN pool configuration will not be shared between the two templates.
- D . The fabric ID configuration will be shared between the two templates.
What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?
- A . Cisco Intersight automatically creates an invisible cloud witness.
- B . Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.
- C . Cisco UCS Manager provides service profile portability across nodes.
- D . Cisco HyperFlex Edge provides native container support through the KVM hypervisor.
Refer to the exhibit.

Due to power limitations at the customer data center, the engineering team must decommission one of the modular switches. In the new design. the customer must ensure that the OSPF process is fully protected on the remaining switch and minimize OSPF flapping in case of any module failure.
Which solution fulfills the requirements for the new design?
- A . routing summarization
- B . graceful restart
- C . LSA aging timer change
- D . OSPF area separation
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)
- A . Layer 3 interfaces can belong to multiple VRFs.
- B . VRF-Lite interfaces can be Layer 2.
- C . Overlapping IP addresses are permitted on different VRFs.
- D . Interfaces that belong to VRFs can be physical or logical.
- E . VRF-Lite interfaces support MPLS.
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC the member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations.
Which two features must be used to prevent these situations from happening in the future? (Choose two.)
- A . auto-recovery
- B . system priority
- C . delay restore
- D . ip arp synchronize
- E . peer-gateway
The data center aggregation layer that uses IPv4 and IPv6 address space must act as a redundant Layer 3 gateway. The solution must support a minimum of 240 virtual groups for an interface The data center aggregation layer hosts network devices from different vendors.
Which FHRP solution meets these requirements?
- A . HSRPv1
- B . VRRPV3
- C . VRRPv1
- D . HSRPv2
A customer needs to deploy a three-tier network architecture that will consist of web, and other business-critical applications. The solution will include Cisco UCS 6324 Fabric interconnects managing B and C Series servers The Fabric interconnects will be connected to the cisco nexus 7706 series switch for network access. A storage array will be directly connected to the UCS deployment.
Which type must be used to meet these requirements?
- A . UCS Interconnect in Ethernet end-host mode UCS Interconnect in Fibre Channel switching mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode - B . UCS Interconnect in Ethernet switching mode UCS interconnect to Fibre Channel switching mode
Fabric Interconnect uplinked to the Nexus device using an LACP port-channel in passive mode - C . UCS Interconnect in Ethernet end-host mode UCS Interconnect in Fibre Channel end-host mode
Fabric Interconnect uplinked to me Nexus device using an LACP port-channel in passive mode - D . UCS Inter conned in Ethernet switching mode UCS interconnect in Fibre Channel end-host mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode
A SAN fabric is built between a pair of Cisco MDS 9000 Series Switches. The requirement is for the ISL to use the VSAN ID to toward traffic from multiple VSANs across the same physical link. Additionally, the Fibre Channel trace feature must be supported.
Which ISL interface parameters are required to meet these requirements?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?
- A . NX-API
- B . Postman
- C . Bash shell
- D . Guest shell
A customer deploys 32 virtualization hosts in a Cisco UCS domain. All hosts run in the same cluster and have Identical hardware specifications. The operating system requires that all firmware is consistent across the hosts (or driver support. The customer must provision additional interfaces later for expandability.
Which feature of Cisco UCS Manager meets these requirements?
- A . Initial Service Profile Template
- B . Initial vNIC Template
- C . Updating Service Profile Template
- D . Updating vNIC Template

