Cisco 300-610 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-610
- Exam Name: Designing Cisco Data Center Infrastructure (DCID)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

A Cisco engineer is configuring Cisco Nexus 7000 Series Switches. To simplify initial configuration verification and vPC+/HSRP troubleshooting. the engineer configures the primary vPC+ peer device with the FHRP active router highest priority. The primary FHRP device responds to ARP requests, even though the secondary vPC+ device also forwards the data traffic.
Which configuration enables the Layer 3 connectivity from each vPC+ peer device?
- A . Set a restore timer that delays the vPC+restart.
- B . Configure a VLAN network interface for the same VLAN from both devices.
- C . Manually configure virtual MAC addresses for any FHRP protocol.
- D . Ensure that the enhanced Layer 2 license has been installed.
The end users report issues with datastore reachability between the newly installed virtual machines (VMs) and the storage array. The VMs are deployed on a Cisco C-Series server, directly connected with Cisco Nexus 5672UP switches over FCoE VLAN. The data traffic on VLAN 99, which is designated as a native VLAN, reaches its default gateway, but FCoE VLAN 99 fails to access the datastore.
Which action resolves the problem?
- A . Implement FCoE traffic on VLAN 10 and data traffic on VLAN 99.
- B . Implement host-facing FCoE ports as spanning-tree port type edge.
- C . Configure the FCoE VLAN in the VSAN database before including it in the trunk port.
- D . Configure the FCoE VLAN traffic on a separate interface from any other VLANs that traverse the network.
A customer requires a tool to manage Cisco network hardware. The solution must use secure communication using a secure network protocol, support the use of declarative language to manage the state of resources, and periodically pull changes to the controlled nodes.
Which tool meets these requirements?
- A . Ansible
- B . SaltStack
- C . Puppet
- D . Nomir
An engineer must design a solution to divide the workload across two different data centers and achieve redundancy in case of the failure of either data center.
Which solution must the engineer choose?
- A . single Cisco HyperFlex stretched cluster
- B . Cisco Hyperflex edge cluster
- C . Cisco Hyperflex ROBO cluster
- D . single Cisco HyperFlex standard cluster
An engineer must develop a Python tool to automate software upgrades of both data center and non-data center devices. All devices offer a RESTful API and require a JSON or XML payload Vendor-specific libraries must be avoided.
Which library must the engineer choose?
- A . requests
- B . Nornir
- C . ncciient
- D . Netmiko
What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)
- A . It propagates hosts reachability without support of traffic flooding.
- B . Layer 3 failures do not propagate beyond the OTV edge device.
- C . It extends the spanning tree between data centers.
- D . It is an open standard.
- E . It constrains HSRP hello messages to each data center.
A Cisco engineers using a PowerShell script to create a service profile template on Cisco U0s Manager. After defining the server pols and other templates, the engineer must ensure that the hosts are visible to the northbound SAN network and storage initiators.
Which configuration must be applied to enable this capability?
- A . Get.UcsAppliancecloud | Get-UcsVlan -Name ApplianceVlan | Add-UcsVlanMemberPortChannel -Switchld A -Portld $ap_pc.Portld
- B . Get-UcsMacPool -Ucs <handle or name> default | Add-UcsMacMemberBlock 00:25:B5:00:A0:00 00:25:B5:00:A0:08
- C . Get-UcsApplianceCloud | Get-UcsVlan -name ApplianceVlan | Add-UcsVlanMemberPort -Switchld A -Slotld 1 -Portld 15
- D . $wwpn_pool | Add-UcsWwnMemberBlock -From 20:00:00:24:B5:00:00:00 -To 20:00:00:24:B5:00:00:09
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications.
Which action should be implemented for the fibre Channel traffic from the vHBA of this service to pass through the I/O module in the Cisco chassis to a specified uplink Fibre Channel port?
- A . Include a SAN pin group in the vHBA policy.
- B . Update the applled Fibre Channel adapter policy.
- C . Update the applled global QoS policy.
- D . Enable persistent binding in the vHBA policy.
A network engineer must design a Cisco HyperFlex solution based on these requirements:
• two clusters in the main data center consisting of five HyperFlex nodes
• one edge node for the remote branch
• cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A . Gigabit Ethernet Switch
- B . HX240C
- C . HX220C
- D . Fabric Interconnect 6300
- E . UCSB B200
Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?
- A . subnet address of BD1
- B . subnet address of L3Out
- C . subnet address of BD2
- D . NAT appliance
