Cisco 300-610 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-610
- Exam Name: Designing Cisco Data Center Infrastructure (DCID)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
An engineer working for a private telecommunication company with an employee ID 4419 90 979 is installing a pair of Nexus 7000 Series Switches and must deploy the solution with these requirements
• The environment must be separated for test and production purposes
• The separation should include control, data and management plane with fault domain isolation and improved security
• The test environment needs only F2 series line cards and a maximum of 256 VLANs
Which set of actions meets these requirements?
- A . Use VRF faQUMIife environments
Configure allow feature set for both VRFs
Enable limit-resource vlan minimum for the test VRF - B . Use VDC for each of the environments
Configure limit-resource module-type functionality for the test VDC
Enable limit resource vlan for the test VDC. - C . Use VDC for each of the environments
Configure allow feature set for both VRFs
Enable limit-resource vlan maximum for the test VRF - D . Use VRF for each of the environments
Configure limit-resource module-type functionality for the test VDC.
Enable module-type for the VRF
A Cisco engineer is preparing a service profile template for a design, which consists of 20 x UCS B200M6 blade servers 2 x UCS 6454 Fabric Interconnect in End Host Mode, and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The blade servers are equipped with VIC 1480 adapters The engineer does not configure a vNIC/vHBA placement policy in the service profile and the vNICs and vHBAs are assigned to the vCon in a particular order What is the mapping scheme in which Cisco UCS assigns the vCons based on the type of server and the selected virtual slot?
- A . linear ordered
- B . network mesh
- C . cross match
- D . round robin
A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure.
Which tool meets these requirements?
- A . Cisco intersight
- B . Cisco UCS director
- C . Cisco data center network manager
- D . Cisco tetration
Which two features are provided by deploying an OOB management network in a Cisco Nexus data center? (Choose two.)
- A . Layer 3 path for monitoring purposes
- B . Layer 2 path for server traffic
- C . Layer 2 path for a vPC peer link
- D . Layer 3 path for vPC keepalive packets
- E . Layer 3 path for server traffic
Which address pool is used when a vHBA template is created?
- A . MAC
- B . WWPN
- C . IP
- D . UUID
An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-based load balancing, prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in the same VSAN.
Which set of actions meets the requirements?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
An engineer is experiencing performance issues on a cisco UCS blade server. The B-series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic.
Which policy must be used to alleviate these issues?
- A . Ethernet adapter
- B . vNIC placement
- C . LAN connectivity
- D . Dynamic vNIC connection
A network architect wants to automate data center LAN configuration by use of Kubernetes, aligned with Cisco best practices for underlay and overlay provisioning. The automation must be able to operate in high-availability mode with active/active operation between hosts in dual data centers.
Which configuration approach must the architect choose?
- A . Cisco OpFlex
- B . OpenFlow
- C . APIC-EM CLI
- D . Cisco Nexus Dashboard Fabric Controller
Refer to the exhibit.

Fiber links are provisioned directly between the spine and leaf switches in the given LAN topology. A/30 prefix has been configured over each fiber link to provide underlay connectivity for a VXLAN network. The network-engineering team must update the network configuration to provide the shortest possible convergence time if a fiber link is cut.
Which action must the team take to meet the requirement?
- A . Configure the /30 links as OSPF point-to-point networks.
- B . Enable BFD on the /30 links
- C . Enable UDLD on the /30 links.
- D . Configure ECMP on the /30 links.
An engineer is configuring a Cisco UCS Service Profile template for an environment that will host Windows servers Some of the servers require access to a Fibre Channel storage network The design requires the server HBA to send the maximum number of commands to a Fibre Channel disk using a single transmission.
Which action must be taken to meet these requirements?
- A . Set LUN Queue Depth to 240
- B . Decrease Link Down Timeout to 20.000
- C . Disable 10 Timeout Retry
- D . Increase Max Data Field Size to 2096