Cisco 300-610 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-610
- Exam Name: Designing Cisco Data Center Infrastructure (DCID)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
A storage administrator receives reports of network delays when database software attempts to access the storage array. The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCS Fabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb port-channel interfaces to connect the storage array. The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the Cisco UCS Fabric Interconnects.
Which deployment type resolves the problems with storage contention?
- A . iSCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode
- B . iSCSI storage with Cisco UCS Fabric Interconnect using an appliance port
- C . iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port
- D . iSCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode
DRAG DROP
Drag and drop the SAN components from the left onto the correct design considerations on
the right.

A network architect designs the iSCSI architecture. The requirements are to achieve high performance and a low amount of oversubscription and to minimize latency.
Which two actions must be taken to meet these requirements? (Choose two.)
- A . Configure the size of the payload in each frame to MTU 9000.
- B . Minimize the number of hops between the storage and the hosts.
- C . Enable iSCSI port binding on the Initiator device.
- D . Set the size of the payload in each frame to MTU 1500.
- E . Use a software-based iSCSI adapter on the client side.
A network administrator must create a redundant vHBA for the mission-critical virtual machines (VMs) installed on a Cisco UCS Fabric Interconnect blade server. The VMs access multiple datastores using VSAN55 and VSAN95. The datastore on which the VMs are hosted must be accessible if any of the uplinks goes offline.
Which action meets these requirements?
- A . Attach VSAN55 to vHBA1 and VSAN95 to vHBA2.
- B . Assign VSAN55 and VSAN95 to vHBA1 and vHBA2.
- C . Enable failover for the vHBA with VSAN55 and VSAN95 enabled.
- D . Configure load-balancing for vHBAs with VSAN55 and VSAN95 attached.
A network architect is designing a storage network to connect to an existing IP network over 100G Ethernet ports for multiple hosts. The architect decided to require ISCI multipathing to provide multiple routes between servers within the SAN and storage devices that reside within the IP network.
Which requirement must be applied to the IP network switch that connects to the SAN environment where the hosts reside?
- A . ECMP routes on the IP network to facilitate load sharing
- B . VLAN load balancing to the storage devices
- C . multiple physical connections to the iSCSI SAN device
- D . trunk configuration toward the iSCSI SAN device for multiple VLANs
A network consultant reviews the requirements for the Storage Area Network (SAN) design. The proposed solution must offer a very efficient port usage and eliminate the need for a separate physical layer of switches and their associated ISLs. The design is not expected to require future expansion.
Which SAN topology must be used to meet these requirements?
- A . core-edge
- B . collapsed-core
- C . core-distribution-access
- D . edge-core-edge
Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)
- A . type
- B . preshared key
- C . port number
- D . identifying tag
- E . hostname
Refer to the exhibit.

A Cisco engineer is configuring a data center design scenario with Cisco Ds 9000 Senes Switches. The cut-through routing mode is chosen for improved read
operation performance. Each iSCSI host requires access to storage through the IPS module. First. the engineer configures the TCP tuning parameters as enabled SACK the maximum
bandwidth of 1 Gbps, buffer size of 4096, keepalive timeout at 1s, and enables Pah MTU. Then, the engineer must set he QoS of the ISCSI link.
What is the maximum QoS value that must be set for the ISCSI session?
- A . 3
- B . 63
- C . 5
- D . 1
A network architect must design a large-scale Cisco SAN topology. The customer has a limited budget, so a design that provides use of resources is required. To support this requirement, the architect to share array ports, ISL, and line card bandwidth.
The customer has also presented these additional considerations:
✑ The customers plans to expand the network by 10% over the next two years.
✑ The customer’s policy requires physically separated infrastructure to support high availability.
Which solution should be used to meet these requirements?
- A . Collapsed-core
- B . Mesh
- C . Core-edge
- D . Edge-core-edge
DRAG DROP
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.


