Cisco 300-610 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-610
- Exam Name: Designing Cisco Data Center Infrastructure (DCID)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

An engineer deployed a VXLAN fabric with this configuration:
– interface VLAN 100 on VTEP1 with no IP address
– interface VLAN 200 on VTEP4 with no IP address
Which set of actions must the engineer take to ensure that host A communicates with host B?
- A . Associate VNI 20000 to VRF Application on VTEP1.
Associate VNI 20000 to VRF Web on VTEP1. - B . Associate VNI 10000 to VRF Application on VTEP1.
Associate VNI 10000 to VRF Web on VTEP4. - C . Associate VNI 10000 to VRF Application on VTEP1.
Associate VNI 20000 to VRF Web on VTEP1. - D . Associate VNI 10000 to VRF Application on VTEP4.
Associate VNI 20000 to VRF Web on VTEP1.
An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster.
Which two UCS policies meet these requirements? (Choose two.)
- A . scrub policy
- B . vNIC policy
- C . boot policy
- D . firmware policy
- E . LAN connectivity policy
A customer must deploy a new Cisco HyperFlex stretched cluster solution to ensure virtual server availability in case the data center fails. The current network environment provides multiple geographic locations.
Which action must be taken to meet these objectives?
- A . Implement the round trip time latency between the sites to be lower than 20 ms
- B . Place an independent witness component at a third site
- C . Deploy the stretch duster sites to be within the distance of 300 miles apart
- D . Configure the cluster with the maximum data replication factor
An architect must automate routine tasks within a data center The data center exclusively uses Cisco Nexus Series Switches The networking team lacks proper programming knowledge and prefers an automation solution that leverages NXOS commands Any configuration change must use HTTPS for transport due to a security compliance requirement.
Which solution must the architect choose?
- A . NX-API
- B . Python-API
- C . Chef
- D . Terraform
An engineer must integrate Layer 4 to Layer 7 services within Cisco ACI Fabric. The main requirement is to have a single point of configuration for network elements and firewall policies.
Which action meets these requirements?
- A . Define the service graph model as network policy mode.
- B . Deploy the firewalls in routed mode with PBR.
- C . Deploy the firewalls in transparent mode.
- D . Define the service graph model as service policy mode.
A customer must install a new Hyperflex Stretched cluster in two sites. Low latency and predictable high performance are the top priorities for this setup due to the extensive usage of data-intensive applications across the cluster.
Which HyperFlex storage solution is recommended to meet these requirements?
- A . All-HDD
- B . Hybrid
- C . All-SAN
- D . All-Flash
An engineer is implementing a storage area network where an NPV is used. The engineer notices that the servers in a storage farm are experiencing heavy traffic contention. The engineer needs to migrate traffic from heavily loaded server interfaces to interfaces with less load. When the new links are deployed, the existing traffic is not rebalanced as expected.
Which feature must be used to meet these requirements?
- A . NPIV
- B . multiple VSAN support
- C . DVM
- D . disruptive load balancing
Refer to the exhibit.

Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch.
The requirements are to redesign the storage network and keep these considerations in mind:
✑ The traffic from each of the server must be redundant and isolated.
✑ The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A . Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
- B . Create a SAN port channel that faces the storage device to sustain a link failure.
- C . Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
- D . Place an additional Fibre Channel switch to create two physically independent storage fabrics.
A cloud service provider provisioned four active/active data centers in various locations within the country at 50 miles between each data center. The data centers must provide redundant network infrastructure and always be available to customers.
Which two data center design steps must be used to meet these requirements? (Choose two.)
- A . Provide application hosting services to customers from the closest data center.
- B . Implement active cluster in data centers 1 and 2 and backup in 3 and 4.
- C . Use asynchronous replication between data centers 1 and 2.
- D . Deploy database services in data center 1 and application layer to other data centers.
- E . Configure application data replication to all backup data centers.
An engineer must design a secondary site to prevent a catastrophic primary site failure. The applications must communicate across sites via the data link layer of the OSI model. The Layer 3 transport that is available for this solution consists of 10-Gb connections over Layer 3.
Which two solutions meet these requirements? (Choose two.)
- A . OTV
- B . vPC
- C . OSPF
- D . ISIS
- E . VXLANEVPN