Cisco 300-610 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-610
- Exam Name: Designing Cisco Data Center Infrastructure (DCID)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
DRAG DROP
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.

An engineer needs to design a network environment in a data center that uses Cisco Nexus 9000 Series Switches.
The solution must meet these requirements:
– interoperate with 802.1D devices
– load-balance spanning-tree traffic
– interoperate with third-party devices
Which spanning-tree protocol meets these requirements?
- A . MSTP
- B . RPVST+
- C . STP
- D . RSTP
Refer to the exhibit.

A Cisco engineer is configuring a customer scenario with 2 x MDS 9000 switches 24 x UCS B200M6 blade servers. UCS 64S4 Fabric Interconnect in end-host mode and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The engineer installs 6 x SQL Server 2019 on all blades and then notices that there are read and write latencies
What is the best way to balance the utilization across the shared ports?
- A . Enable "Only dedicate rate mode
- B . Change the assigned speed to 8 Gbps Auto.
- C . Set 4 Gbps performance buffers
- D . Disable restrictions on oversubscription ratios
A cloud provider deploys an infrastructure based on Cisco ACI Fabric, Cisco UCS, and Cisco HyperFlex Data Platform. The storage area network will be based on Cisco MDS 9000 Series Switches with Hyper-V, VMware, and KVM used as the virtualization platform. The requirement is to deploy the overall solution by using a robust automation and orchestration tool.
Which tool meets these requirements?
- A . Cisco Prime Infrastructure
- B . Cisco Network Assurance
- C . Cisco UCS Director
- D . Cisco Cloud Center
Refer to the exhibit.

An engineer needs a solution to extend Fibre Channel traffic between multiple sites. The IPsec tunnels must be used to encrypt and secure the traffic.
Which technology must be selected to meet these requirements?
- A . FCoE
- B . FCIP
- C . VXLAN
- D . iSCSI
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines. The operational complexity continues to grow with additional policies and servers added to the environment. An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules.
Which tool meets these requirements?
- A . Puppet
- B . NSO
- C . Saltstack
- D . Ansible
Refer to the exhibit.

A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other.
Which Cisco ACI topology design meets these requirements?
- A . Multi-site
- B . Multi-pod over MP-BGP EVPN
- C . Multi-cloud
- D . Multi-pod over OSPF EVPN
A Cisco engineer is discussing a data center design scenario that consists of 24 Cisco UCS B200M6 blade servers, 2 Cisco UCS 6454 Fabric Interconnects, and 3 Cisco UCS 5108 server chassis. In the proposed configuration, the server links. which are vNICs on the blades, are associated with a single uplink port. Server-to-server Layer 2 traffic is locally switched, server-to-network traffic goes out on its pinned uplink port, and each server MAC address must be learned before traffic can be forwarded to it.
Which feature stipulates that traffic is forwarded to a server only if it is received on a pinned uplink port for this server?
- A . MAC address table virtualization
- B . host F Port channeling
- C . native VLAN tagging on both sides
- D . RPF check
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A . supports Layer 3 port channels
- B . disables spanning-tree
- C . no spanning-tree blocked ports
- D . uses all available uplink bandwidth
- E . maintains single control plane
Which two paths are provided by deploying an OOB management network in a data center that uses Cisco Nexus switches? (Choose two.)
- A . Layer 2 for server traffic
- B . Layer 3 for vPC keepalive packets
- C . Layer 3 for server traffic
- D . Layer 3 for monitoring purposes
- E . Layer 2 for a vPC peer link
