Cisco 300-610 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-610
- Exam Name: Designing Cisco Data Center Infrastructure (DCID)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A . NPIV mode
- B . FC end-host mode
- C . NPV mode
- D . FC switching mode
An engineer must provide Layer 2 adjacency between data centers that are in two locations and separated by a routed network The adjacency must be based on Cisco Nexus 7000 Series Switches The solution must offload learning of host reachability information to the control plane to avoid excessive flood and learn congestion Also the data center in one of the sites experiences a large volume of unknown unicast traffic that the solution must mitigate.
Which data center interconnect technology meets these requirements?
- A . VXLAN
- B . OTV
- C . VPLS
- D . LISP
A company has several data centers around the world that must be interconnected over Layer2. The service provider supports MPLS services to all the locations. The proposed solution must be vendor agnostic and scalable enough to support the rapid growth of the company.
Which data center technology is recommended to achieve this goal?
- A . OTV
- B . VXLANEVPN
- C . FabricPath
- D . EoMPLS
An engineer manages hundreds of Cisco Nexus Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive support, and is object-oriented.
Which automation tool should be used to meet these requirements?
- A . Python
- B . Bash
- C . YAML
- D . Perl
Refer to the exhibit.

A Cisco engineer is configuring a Cisco UCS integrated infrastructure for SAP HANA that consists of 8 x Cisco UCS B/C480-M5 servers for SAP HANA and 4 x Cisco UCS C240-M5 C-Series rack mount servers for storage. The rack servers are equipped with Cisco VIC 1225T. The engineer plans to install RHEL8, but the boot process is interrupted at installation because the iSCSI LUNs are not recognized by the VIC adapter. After proper investigation, the engineer concludes that the initiator and target configuration that is programmed on the primary iSCSI VNIC to the operating system is missing.
What is the reason for the issue?
- A . The network interfaces are not configured.
- B . The Linux ISO image is not Cisco approved.
- C . The storage system is not reachable.
- D . The boot parameter ip=ibft is not set.