Cisco 300-510 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-510
- Exam Name: Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

Company X is multihomed to a service provider. With the default settings, the link between PE2 and CE1 is the primary link, but company X has asked for the link between PE4 and CE2 to operate as the primary instead. A network engineer used a route map with local-preference to manipulate the routes from PE2 to CE1 to be less desirable and applied the route map on PE2 outbound to CE1. However, the path from PE2 to CE1 is still preferred.
Which action must the engineer take so that the desired path is chosen?
- A . Apply local-preference on PE2 outbound to CE2 with a value less than 100.
- B . Configure the AS path prepend attribute to increase the number of hops between CE2 and PE4.
- C . Configure the weight attribute on PE2 in the outbound direction to CE2 with a value less than 65535.
- D . Apply MED in the outbound direction on PE2 to CE1 with a cost lower than the path from PE4 to CE2.
Refer to the exhibit.

CE1 and CE2 use connectivity over the service provider cloud to reach CE3 In the event of a link failure in the service provider cloud which BGP feature relies on IGP convergence to quickly assist in the installation of a backup path?
- A . BGP graceful restart
- B . BGP route dampening
- C . BOP PIC core
- D . BGP confederations
Refer to the exhibit.

Refer to the exhibit Networks 172.16.31.0/24 and 172 16 30.0/24 are advertised in area 34. and network 172.22 10.0/24 is advertised in area 0. A recent security review discovered that users connected to routers R1 and R2 have been making unauthorized access to an application running on network 172 16 31 0/24 An engineer determined that routers R1 and R2 are receiving updates for network 17 16 31 0/24.
Which action resolves the issue?
- A . Apply route filtering on routers R3 and R4.
- B . Apply route filtering on router R3 only.
- C . Apply route filtering on routers RI and R2
- D . Apply route filtering on router R4 only.
What is a restriction of 6PE?
- A . It is implemented only over eBGP peers.
- B . It is implemented only over iBGP peers.
- C . It adds a value of ::FFFf:: on the IPv4 next hop address.
- D . It cannot be implemented on VRFs.
In a PIM-SM environment, which mechanism determines the traffic that a receiver receives?
- A . The receiver explicitly requests its desired traffic from the RP on the shared tree.
- B . The receiver explicitly requests traffic from a single source, which responds by forwarding all traffic.
- C . The RP on the shared tree floods traffic out of all PIM configured interfaces.
- D . The receiver explicitly requests traffic from each desired source, which responds by sending all traffic.
A
Explanation:
A shared tree is built first between receiver and the RP. The receiver is then able to switch to a Source tree as needed.
Refer to the exhibit.

After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships.
Which statement about the configuration is true?
- A . Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
- B . Router 2 uses router 3 as the next hop for 192.168.0.0/24
- C . Router 2 uses router 1 as the next hop for 192.168.0.0/24
- D . Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
C
Explanation:
From IOS 15.1(2)S onwards, Cisco uses the OSPF path selection order is O > O IA > N1 > E1 > N2 > E2 https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/212608-ospf-external-path-selection-external-t.html
Refer to the exhibits.

All links inside the network are configured at a default cost of one inside the fully converged OSPF domain.
Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?
- A . Interface GigabitElhemet 0/0. The tie breaker of the node index priority is lower and trumps the path cost.
- B . Interface GigabitEthernet 0/1. The tie breaker of the path cost being lower. The node index priority does not impact this selection process.
- C . Interface GigabitEthernet 0/1. The tie breaker of the node index priority is lower and trumps the path cost.
- D . Interface GigabitEthernet 0/0. The tier breaker of the path cost being lower. The node index priority does not impact this selection process.
Refer to the exhibit.

An engineer working for a private telecommunication company with an employee id: 4233:46:364 notices that the customer network going through AS30-AS65001-AS65000 is experiencing packet drops when it accesses an application at 172.16.20.1/32 In the DC cloud. The BGP link between AS20 and AS30 is inaccessible because of a fiber cut. Routers RL, RN, and RZ are configured with confederation identifier 10.
Which action resolves this Issue?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit. After creating dynamic neighbors for the range specified, the network administrator with an employee ID: 4690:88:374 cannot see all the BGP neighbors established.
What is the issue?
- A . The single activated neighbor cannot be within the listen range.
- B . A list of neighbors belongs only to a defined ASN.
- C . The peer groups must also be activated inside the address family.
- D . The listen limit is smaller than the prefix defined in the listen range.
After an engineer configures BGP in R1, it starts receiving this message
*Jun 29 13:30:50.122: %BGP-5-ADJCHANGE: neighbor 192.168.10.1 Down User reset
Jun 29 13:30:52.341: %BGP-3-NOTIFICATION: sent to neighbor 192.168.10.1 2/6 (unacceptable hold time) 0 bytes
Which action makes the peering come back up again?
- A . Make a soft reset to the peer.
- B . Set up a minimum hold-down timer higher.
- C . Set up a hello timer higher.
- D . Set up a hold-down timer higher.