Cisco 300-510 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-510
- Exam Name: Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

How are packets directed through the data plane when SRv6 is implemented?
- A . An ordered list of segments is encoded in a routing extension header
- B . The MPLS data plane is used to push labels onto IGP routes
- C . A stack of labels represents an ordered list of segments
- D . The packet is encapsulated with a header and trailer encoding the ordered list of segments
A
Explanation:
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKIPM-2249.pdf
For which reason can two devices fail to establish an OSPF neighbor relationship?
- A . The two devices have different process IDs
- B . The two devices have different network types
- C . The two devices have different router IDs
- D . The two devices have the same area ID
B
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13699-29.html
What is the role of segment routing mapping server?
- A . It advertises a local SID mapping policy to all the mapping clients.
- B . It works with IGP instances to calculate the prefix-SIDs in the absence of a mapping policy.
- C . It selects multiple mapping entries to create overlapping active mapping policies.
- D . It reads and translates remotely received SIDs from other mapping servers to create SID mapping entries.
A
Explanation:
![]()
Refer to me exhibit.

A network engineer sets up a multihoming eBGP topology where multiple Autonomous Systems connect to ASN 64501. The engineer wants to block all the routers coming from ASN 64502. but allow all the others.
For that purpose, the following AS Pam prefix 1st s being used:
![]()
What must be fixed to achieve this result?
- A . The AS-PATH filter must be defined inside the route-map mode
- B . At the end ip as-path access-list 10 permit .* must be included
- C . The statement must be modified with ip as-path access-list 1 deny _64502_
- D . The statement must CM modified with ip as path access list 1 deny A64502$
Refer to the exhibit.

Unified MPLS is implemented on this network to provide end-to-end services A network engineer noticed that R3 is failing to receive labels from R1 However, R2 is receiving labels from R1 R3 can ping R1 normally.
Which action resolves the issue?
- A . Add the cdp run command to the link configuration between R1 and R3.
- B . Add the send-label keyword in the R1 neighbor statement for R3.
- C . Configure R1 to run Unified MPLS on both interfaces.
- D . Disable mpls Ip on the link between R1 and R3
An engineer warns to map a multicast IP address to a multicast MAC.
How many bits are used to make the conversion?
- A . high-order 24 bits
- B . higher-order 23 bits
- C . low order 23 bits
- D . lower-order 24 bits
Refer to the exhibit.

An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3.
Which mechanism should the engineer apply in order to steer the traffic correctly?
- A . The MED attribute can be applied on R2 to influence R1 to use it as the primary path.
- B . The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.
- C . The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.
- D . The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.
D
Explanation:
Some level of load balancing is achieved by default as BGP prefers shortest AS_PATH for certain prefix (Cisco BGP path selection algorithm – rule 4) . If 1-7 rules gives no preference for certain prefix then with rule 8. Prefer lowest IGP metric to BGP next hop we can force traffic to R2 or R3 influencing load distribution.
Which two conditions must be met before separate ISPs can provide interdomain multicast routing?
(Choose two.)
- A . Each ISP must configure MSDP to connect its individual multicast administrative domain to the domains at other ISPs.
- B . Each ISP must dedicate a single router to handle multicast traffic between providers.
- C . Each ISP must replace its RP assignment with a global RP.
- D . Each ISP must configure its network to use PIM-DM.
- E . Each ISP must support intradomain multicast routing.
Refer to the exhibit.

OSPF is an interior routing protocol on the network. R2 Is In the backbone area, and R4 is In a totally NSSA area. R5 announces only the 0.0.0.0/0 route to R4 via BGP. R4 is configured with redistribute bgp 736 metric-type 2. After the most recent maintenance window. R2 no longer has the default route via R4.
Which action must the network engineer take to correct the reachability problem?
- A . Configure area 2 nsta no-summary under the global router configuration on router R2.
- B . Configure default-information-originate under the OSPF configuration on router R4.
- C . Configure ip route 0.0.0.0 0.0.0.0 nullO under the global router configuration on router R4.
- D . Configure area 2 nssa translate type7 no-suppress-fa under the OSPF configuration on router R2.
What is the difference between RPL and route-maps?
- A . Unlike RPL. route-maps are supported with IPv4 address families only
- B . Unlike route-maps, only RPL supports extcommunity sets to group extended communities.
- C . Unlike RPL. route-maps are designed for BGP protocol only.
- D . Unlike route-maps, only RPL is designed for bulk configuration of multiple devices.