Cisco 300-510 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-510
- Exam Name: Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

Routers R1. R2, R3. and R4 are peer routers that reside in different administrative domains. PIM-SM is running in each autonomous system, and EBGP is configured between the peers. A network administrator has just implemented MSDP between the connected peers. When the administrator enabled the MSDP configuration. R1 and R2 failed to establish a peering relationship. All other connected routers successfully established peering sessions.
Which action must the engineer take to resolve the issue between R1 and R2?
- A . Change the MSDP authentication method to clear text
- B . Configure the peers to be in the same autonomous system.
- C . Set the same MSDP password on both peers
- D . Implement BGP authentication between the peers.
Refer to the exhibit.

A network operators configuring BGP PIC on CE1 on already established neighborships with PE1ana PE2 inside the fully converged MPLS network.
Which element needs to be implemented to make this feature function effectively?
- A . Bidirectional Forwarding Detection must be applied to the upstream facing BGP interfaces.
- B . The operator must ensure that all prefixes have the same next-hop from PE1 and PE2 for BGP PICA reserved BGP
- C . community of 1 10 must be used to denote the PIC feature set to the routing protocol
- D . BGP import export policies must be applied on all devices for the routes needing BGP for PIC
Refer to the exhibit.

A network engineer configured the redistribute connected subnets route-map filtering command on R1 to redistribute connected interfaces to the OSPF process. The engineer also wants to filter out IP address 10 0 1 0/24. but the prefix still appears in the routing tables of the other routers on the network.
Which action corrects the problem?
- A . Remove route-map sequence 30.
- B . Add a set statement to route-map sequence 20.
- C . Change the deny statement in access list 2 to permit
- D . Remove the subnets keyword from the redistribute connected subnets route-map filtering command.
Refer to the exhibit.

Router 1 is connected to router 2 on interface TenGigE0/1.
Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
- A . TenGigE0/1 interface provides the alternate path
- B . A backup path must be statically installed
- C . TenGigE0/2 interface provides the alternate path
- D . A primary path must be manually installed
Refer to the exhibit.

Routers R1 and R2 cannot form a neighbor relationship, but the network is otherwise configured correctly and operating normally.
Which two statements describe the problem? (Choose two.)
- A . The two routers are in the same area
- B . The two routers are in different subnets
- C . The two routers have password mismatch issues
- D . The two routers have the same network ID
- E . The two routers are in different areas
Refer to the exhibit.

The engineering team noticed route disruptions when DSL subscriber 172.16.20.10 goes offline.
In this service provider environment:
– The OSPF backbone area is configured to advertise loopback prefixes
– The PE routers are running BGP-IPv4 address family in a BGP-free core topology.
The DSL subscriber IP subnet 172.16.20.10/32 is redistributed in BGP on PE1.
Which configuration on PE1 resolves the issue?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

An engineer applied the configuration on R1 to prevent network 192.168.1.0/24 from being propagated outside of area 5. After the change, users have reported they are not able to access any of the application servers that were working before. While checking the routing table of the peer router. The engineer notices R1 stopped propagating any routes outside are 5.
Which action must be taken to fix the problem?
- A . Configure an additional filter-list on R1 for inbound traffic to allow external router into area 5.
- B . Reconfigure the filter-list statement to apply in the inbound direction
- C . Change the prefix-list action to permit and add an explicit deny statement for network 192.168.1.0/24
- D . Add a permit statement for 0.0.0.0/0 le 32 to the end of the prefix-list 10 override the implicit deny.
Refer to the exhibit.

A network engineer just replaced five routers on this OSPF network. When the routing protocol is brought up, R5 cannot reach routes that originate on R1. The engineer verified that all connected links have established neighbor relationships. R5 reaches routes originating on R3 and R4.
Which action resolves the issue?
- A . Configure an OSPF virtual link to bridge Area 0 on routers R3 and R4.
- B . Configure automatic neighbor discovery on RI and R5.
- C . Configure OSPF to have a contiguous Area O.
- D . Configure each link to be point-to-point.
Refer to the exhibit.

An engineer applied the summarization configuration on R1 for four networks (192.168.20.0/24 to 192.168.23.0/24) in area 1 and eight networks (192.168.32.0/24 to 192.168.39.0/24) in area 2 to stop the flooding of all the customer routes. While checking the routing table of R2, the engineer noticed that R1 is still sending only specific routes to R2.
Which configuration should the engineer apply on R1 to summarize routes?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Which two routing protocols have extensions capable of running SRv6? (Choose two.)
- A . OSPF
- B . BGP
- C . RIP
- D . IGRP
- E . EIGRP