Cisco 300-510 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-510
- Exam Name: Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

Which tree does multicast traffic follow?
- A . shared tree
- B . MDT default
- C . source tree
- D . MDT voice
Refer to the exhibit.

Users connected to an application on 1.1.1.1 via routers CE1 and CE2 are complaining of frequent disconnections. While troubleshooting the issue, a network engineer with an employee ID: 4333:96:916 determined that the application itself is working normally, but the link connected to the 1.1.1.1 application is flapping. The users on CE1 and CE2 are accessing applications on 2.2.2.2 without difficulty.
Which action resolves the issue?
- A . Disable split horizon on router R2.
- B . Redistribute CE1 routes on router R2.
- C . Enable passive interface on the router R3 Loopback1 interface.
- D . Enable route dampening on routers R1 and R2
Refer to the exhibit.

R1 is expected to receive routes originating from AS 65516 and from any ASs that are directly attached to it. However, R1 is receiving routes only from AS 65516.
Which action corrects the configuration?
- A . Change the regular expression in the AS-path permit filter to .*.
- B . Change the regular expression in the AS-path permit filter to ^65516_[0-9]*$.
- C . Add the regular expression ^$. in the AS-path filter to permit the traffic from R2.
- D . Change the regular expression in the AS-path permit filter to _65516_.
A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances.
Which description of the possible cause of issues in the routing domain is true?
- A . The same interface cannot be advertised in two different IS-IS instances
- B . The IS-IS “ISP” and “ISP2” instances are unrelated and unable to intercommunicate
- C . The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship
- D . The interface mode ip router is-is command was not included in the script
A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_isis/configuration/xe-3s/irs-xe-3s-book/irs-instance-vrf.html
What is the characteristic of enabling segment routing for IGPs?
- A . Segment routing must first be enabled under the routing process and then globally.
- B . Segment routing must first be enabled globally and then under the routing process.
- C . Segment routing must be enabled only globally.
- D . Segment routing must be enabled only under the routing process.
A network operator working for a telecommunication company with an employee id: 4074:92:707 is planning to implement the Nonstop Forwarding (NSR) feature on the customer’s core network. After getting the configuration ready for NSR.
On which router should the operator implement NSR changes?
- A . on the CE router
- B . on the ASBR router
- C . on the ABR router
- D . on the PE router
D
Explanation:
Reference: https://www.cisco.com/en/US/technologies/tk869/tk769/technologies_white_paper0900aecd801dc5e2.html
Refer to the exhibit.


VPN users that are connected to PE routers are facing network issues. Traffic that originates from CE1 drops before reaching CE2. An engineer finds no outgoing traffic statistics on PE1 and PE2 routers toward CE devices and finds that the PE1 router is running the older software image.
Which action must be implemented to resolve the issues?
- A . Enable LDP protocol on PE1 and PE2 routers.
- B . Advertise P1 router loopback on PE1 in OSPF.
- C . Enable CEF-based forwarding on PE1 router.
- D . Advertise PE2 router loopback on PE1 in OSPF.
C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_basic/configuration/xe-3s/mp-basic-xe-3s-book/mp-mpls-cisco-rtrs.html
Refer to the exhibit.

A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A . Only the administratively scoped range is permitted
- B . Only ASM is permitted
- C . Only the default SSM range is permitted
- D . Only GLOP is permitted
Refer to the exhibit.

Early in the growth cycle of a small enterprise the network-engineering team implemented segment routing to support automation of the IPv4 network As the network grew organically more devices were added and the company migrated to SRv6 The company is now planning to significantly expand the number of hosts connected to R2 and R6 which will require further path manipulation.
Which action must the team take to customize the route that traffic takes between endpoints in the network?
- A . Implement the flexible algorithm to customize the shortest path through the network
- B . Implement MLAG to reduce traffic load on heavily congested links
- C . Implement spanning-tree protocol to avoid loops between excess devices in the network
- D . Implement priority queuing to drop non-mission-critical traffic.
Refer to the exhibit.

A network engineer must enable connections from customers on PE1 to the external network via the SR-MPLS forwarding plane with a range of 8000 SID.
In the current environment
![]()
Which configuration must the engineer apply?

- A . Option A
- B . Option B
- C . Option C
- D . Option D