Cisco 300-510 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-510
- Exam Name: Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

The Cisco router has a single uplink to the upstream network, which is critical to the business. The router is configured for traffic steering with the Autoroute mechanism configured to steer all OSPF and IS-IS prefixes over non-shortest paths and divert traffic for those prefixes to the SR-TE policy. However, the Autoroute Announce functionality for all prefixes is not working.
Which additional command set must the engineer configure on the router to correct this issue?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

Company_A hosts multiple online VoD platforms. R3 is connected to MAN with a 100 Mbps link R2 has only a 10 Mbps connection, but it has the lowest number of hops to R1 A network engineer must allow users in area 49.421e.2331 5548.7624 00 to access online library resources, using the best possible route toward the online platforms to guarantee the highest connection quality. After the engineer implements the requirements, they notice an excessive number of routes in the R4 routing table and high memory consumption on the router.
Which two actions must the engineer take to resolve the issue? (Choose two.)
- A . Create an access list on R2 and redistribute all routes from L1 into L2.
- B . Configure summary-address area level-1-2 64.45.52.0 255.255.252.0 on R3.
- C . Create a route map on R3 and redistribute all routes from L2 into L1.
- D . Configure summary-address level-2 64.45.52.0 0.0.3.255 on R2.
- E . Configure summary-address 64.45.52.0 255 255.252.0 level-1 on R3
Refer to the exhibit.

Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A . MED
- B . local preference
- C . origin
- D . weight
B
Explanation:
Weight is local to the router while LP allows routers in an AS with multiple exit points to choose which exit point is used to reach a particular NLRI.
Refer to the exhibit.

After a recent network implementation project, customer A is performing stress testing to verify network redundancy at the branch office connected to R4. When the link from R2 is shut own as shown, the SLA tracking object fails and the cost of the link between R2 and R4 increases to 100. However, a traceroute operation from a PC in the Branch office shows that traffic to HQ is still routed via R2.
Which solution corrects the problem and optimizes traffic flow via R3 without creating operational overhead?
- A . Configure two OSPF processes on R2 and R3 and redistribute traffic between them.
- B . Redistribute routes from BGP to OSPF as type El.
- C . Use multiarea adjacency to extend Area 10 to the link between R2 and R3.
- D . Create a virtual channel from R3 to R4.
Which two statements about route reflectors are true? (Choose two.)
- A . Routes received from nonclient peers are reflected to route reflector clients as well as nonclient peers.
- B . Routes received from nonclient peers are reflected to route reflector cluster as well as OSPF peers.
- C . If a router received an iBGP route with the originator-ID attribute set to its own router ID, the route is discarded.
- D . Routes received from a route reflector client is reflected to other clients and nonclient peers.
- E . If a route reflector receives a route with a cluster-list attribute containing a different cluster ID, the route is discarded.
CD
Explanation:
Reference: http://www.networkers-online.com/blog/2009/02/bgp-route-reflector-basics/
Refer to the exhibit.

The network is situated at different locations on the customer site. The customer runs a mission-critical application behind CE2. which is connected over a 10 link to the local network of the customer After recent configuration changes to the P and PE routers, an LSP failure has occurred, causing connectivity issues. CE1 is unable to which the CE2 internal IP address.
Which action resolves this issue?
- A . Implement BGP in the core and configure an MPLS TE tunnel between PE1 and PE2
- B . Configure the ip ospf network point-to-multipoint command on PE2.
- C . Change the subnet mask on the PE2 loopback interface from /24 to 32
- D . Configure the ip ospf network point-to-point command on PE2
How does the SRv6 IS-IS Flexible Algorithm function on the data plane?
- A . It uses the TE metric in its path calculations to optimize the cumulative TE metric.
- B . It uses the IGP metric in its path calculations to optimize reachability.
- C . It automatically delivers traffic to the destination over an engineered path computed by the IGP.
- D . It applies path computation algorithms to learn the topology and compute a pair of disjoint LSPs.
Refer to the exhibit

Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?
- A . R5
- B . R3
- C . R4
- D . R2
Refer to the exhibit.

Which task must be performed on interface g1/0/0 to complete the SSM implementation?
- A . configure OSPFv3
- B . enable CDP
- C . disable IGMP
- D . configure IGMPv3
What is the purpose of the confederation identifier in a BGP confederation?
- A . It identifies the autonomous system that belongs to the confederation.
- B . It advertises routes outside of the confederation’s autonomous system.
- C . It reflects the route reflector duster ID within the confederation.
- D . It carries the AS number within the confederation s local autonomous system