Cisco 300-510 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-510
- Exam Name: Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
What is a feature of SR-PCE?
- A . It learns the topology information via OSPF or IS-IS only
- B . It learns the topology information via OSPF or IS-IS or through BGP-LS.
- C . It uses the IGP metric in its path calculations to optimize reachability.
- D . It uses the TE metric in its calculations to optimize the cumulative TE metric
A network administrator is planning an upgrade for a PE router that has BGP peering sessions with several CE routers. The SLA has stringent uptime requirements, so the administrator wants to implement BGP NSR with SSO to provide fast convergence during the upgrade.
Which action must the engineer take as part of the NSR implementation?
- A . Configure a VRF on each CE router on the interface that connects to the PE router.
- B . Configure the bgp graceful-restart command on the PE router.
- C . Configure the clear ip bgp 65514 soft in command on the PE and CE routers.
- D . Configure MPLS on the link between the PE and CE routers.
Refer to the exhibit.

A network operator wants to expand the segment routing global block in upcoming maintenance. The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.
Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?
A)

B)

C)

D)

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1.
Which configuration achieves this goal?
A)

B)

C)

D)

- A . Option A
- B . Option B
- C . Option C
- D . Option D
C
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/47868-ospfdb9.html
DRAG DROP
Drag and drop the characteristics from the left onto the corresponding routing protocols on the right.

Explanation:
OSPF
Routing between areas is distributed through the backbone area.
It operates on the network layer
IS-IS
Backbone routers reside in any area.
It uses the system ID to identify routers on the network
Refer to the exhibit.
The service provider provides IPv6 connectivity to large enterprise customers with offices spanning several geographic regions SRv6 is running in the service provider core. The service provider just signed a contract with a new customer that is still running IPv4 The new customer needs connectivity between its two sites connected via CE1 and CE2 and the internet.
Which action must the service provider s network-engineering team take to provide connectivity across the SRv6 data plane?
- A . Encapsulate IPv4 traffic from the CEs on their respective PEs through a TE path between PE1 and PE2.
- B . Translate the IPv4 addresses to an IPv6 address on each CE
- C . Redistribute the IPv4 routes from CE2 and CE1 on their respective PEs
- D . Implement an NTP master and sync the timers on the P and PE routers
network engineer must implement a segment routing policy rule that specifies that SIDs are bounded manually. The policy will be used for traffic steering based on incoming label ..with the binding SIDs, adjacency SIDs, and BGP peering SIDs. All labels will be in the local segment with the range from 40000 to 50000.
How must the engineer implement … label allocation?
- A . Implement the standard default SRGB range in the SR global segment.
- B . Implement a non-default SRGB range in the SR local segment.
- C . Implement a non-default SRLB range in the SR global segment.
- D . Implement the default SRLB range in the SR local segment
Refer to the exhibit.

A network operator is working to deploy a Unified BGP design and allow it to be available only in selected markets and services in the future. The label allocation is not functioning as desired.
Which action will fix the issue?
- A . Remove the allocate-labels command.
- B . Reconfigure the route-policy ALL_LABELS to match all after the drop.
- C . Reconfigure the route-policy ALL_LABELS to pass.
- D . Remove the route policy and only configure "allocate-label".
What is the purpose of a BGP confederation?
- A . It limits the number of routes a device receives from its peers, which reduces CPU load.
- B . It improves service by increasing the number of simultaneous iBGP peering sessions.
- C . It redirects traffic away from route reflectors, which reduces their operating load.
- D . It reduces the number of iBGP peers and increases stability.
Refer to the exhibit.

While configuring router 2 with all the default values, a network engineer cannot see any route received in router 1.
How should the engineer solve the issue?
- A . Set up a priority different than 0 in the interface.
- B . Modify the router ID to be the interface IP on the serial.
- C . Modify the IP address or mask of the interface to a valid one.
- D . Set the network type in S1/0 to point-to-point.