Cisco 300-510 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-510
- Exam Name: Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

All backbone interfaces on the network are in VRF_MPLS and ip rsvp signalling hello is preconfigured on all MPLS routers in the network. After router R2 is upgraded and its configuration restored from backup. LSP signaled via RSVP that the tunnel from R1 had been tom down. The network engineer confirmed IP reachability line the backbone network
Which action must the engineer take to fix the issue?
- A . Configure ip rsvp udp neighbor 172.16.10.1 vrf VRFMPLS under the global configuration on R2.
- B . Configure ip rsvp listener outbound reply 172.16.10.1 vrf VRF_MPLS under the global configuration on R2.
- C . Configure ip rsvp signalling hello refresh interval 20 under the interface GiO/0 configuration on R1.
- D . Configure ip rsvp udp-multicasts 172.16.10.2 vrf VRFMPLS under the interface GiO/0 configuration on R1
Refer to the exhibit.

OSPF is an interior routing protocol on the network Routers R4 and R6 are in area 0 and all tunnels are in area 2 R4 is connected to R6 with a 1 Gbps link and with 100 Mbps links to the rest of the LAN After the most recent maintenance window a network engineer noticed that R4 is using a suboptimal route toward 10 173 12 10 instead of the route via R6.
Which action must the network engineer take to correct reachability toward 10 173.12 10/24?
- A . Configure auto-cost reference-bandwidth 1000 under the global OSPF configuration on R4
- B . Configure ip ospf 0 area 0 under tunnel 2 on both R4 and R5
- C . Configure ip ospf cost 120 under the Gi0/0 interface on R4
- D . Configure ip ospf 2 area 0 under tunnel 3 on both R6 and R5
Refer to the exhibit.

An engineer working for a private telecommunication company with an employee id 3977 74 814 implemented the configuration on Router 1.
What is the effect of it?
- A . Router 1 sends and receives multiple best paths from neighbor 192.168.1.1
- B . Router 1 sends up to three paths to neighbor 192.168.1.1 for all routes
- C . Router 1 sends only one best path to neighbor 192 168.1.1.
- D . Router 1 receives only one best path from neighbor 192.168.1.1
Refer to the exhibit.

EBGP peering is up between BGP AS 65101 and BGP AS 65201 The service provider expects traffic convergence within 300ms between the two autonomous systems but the network operations team sees that route and traffic convergence is too slow.
Which two actions improve the convergence time? (Choose two.)
- A . Change the bfd multiplier value to 3 on routers RN and RM
- B . Configure fall-over bfd under the BGP instance for BGP neighbors on RN
- C . Configure bfd interval 50 min_rx 100 multiplier 6 on the connected interfaces on RN and RM
- D . Configure bfd interval 50 min_rx 50 multiplier 6 on the connected interfaces on RL and RY
- E . Change the bfd interval value to 100ms on routers RN and RM
Refer to the exhibit.

Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing.
Which BGP configuration must be added to the configuration?
- A . It must be configured for graceful restart
- B . It must be configured with a route reflector
- C . It must be configured with send labels
- D . It must be configured with PIC edge
Refer to the exhibit.

Traffic flow from router R1 to router R6 is delay-sensitive It must consider potential link-failure and node-failure conditions.
Which configuration must an engineer apply to router R1 to route traffic to router R6 if router R2 fails?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
How does SRv6 function on the control plane?
- A . It enables SRH-capable nodes to terminate IPv6 packets at the network egress to carry the SRv6 locator.
- B . The Ingress node of the SR domain adds a uSlD format IPv6 header to carry the SRv6 locator.
- C . The ingress node of the SR domain swaps the SRv6 header for the IPv6 header
- D . The egress node of SR domain imposes a new outer header
Refer to the exhibit.

Customer traffic from the branch site to the hub is experiencing packet drops.
The engineer verified that:
✑ Customer traffic from the hub is able to reach the branch site.
✑ The connection between PE1 and PE2 is working normally.
✑ Routers P1 and P2 are able to ping devices on the hub site.
Which action resolves the issue?
- A . Redistribute the CE1 OSPF routes in the PE1 VRF.
- B . Redistribute the CE2 OSPF routes in the PE2 VRF.
- C . Advertise the VPNv4 routes of the branch site in CE2.
- D . Advertise the VPNv4 routes of the hub in CE1.
Refer to the exhibit.

Routers R1 and R2 are RFC 5036-based MPLS-enabled core routers MPLS IP is enabled globally on both routers OSPF with area 0 configuration is used as an interior routing protocol between the routers After new services were enabled on the MPLS network, LDP connectivity failed on R1 TCP/UDP port 711 is confirmed to be open.
Which two actions must the engineer take to correct the problem? (Choose two.)
- A . Configure network 10.10.140.192 0.0.0.0 arta 0 under the OSPF configuration on R2
- B . Configure mpls label protocol Idp under the Gi0/0 interface on R1
- C . Configure mpls ip under the Gi0’0 interface on R1
- D . Configure network 10.10.140.192 0.0.0.255 arta 0 under the OSPF configuration on R2
- E . Configure labtl mpls ip protocol tdp under the Gi0 0 interface on R1
Refer to the exhibit.

Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed.
Which statement about this configuration is true?
- A . Router 1 must define an explicit path to router 2
- B . Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces
- C . Router 2 must have a tunnel interface created with router 1 as the destination
- D . Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1