Cisco 300-425 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-425
- Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
When a wireless survey is conducted at a customer facility, signal attenuation in an area that is surrounded by thick glass walls is noted as 2dB.
When Cisco Prime Infrastructure is configured, which obstacle must be placed in a map editor to represent the impact that the glass wall will have on the RF signal in the facility?
- A . heavy door
- B . glass
- C . thick wall
- D . light wall
A wireless engineer is hired to design a network for a technology company. The company campus has four buildings and a warehouse with access points that provide full wireless coverage as well as a pair of WLCs located in the core of the network.
Which type of wireless architecture is being used?
- A . unified deployment
- B . autonomous deployment
- C . centralized deployment
- D . distributed deployment
C
Explanation:
![]()
An engineer is designing a wireless network to support hyperlocation in an environment that already has APs installed. During the survey, the engineer notices that the APs are pointing in different directions.
What is the recommended way to align the APs to easily determine AP Azimuth, X-Y, and ceiling height information, and minimize confusion and user-entered errors?
- A . APs must be aligned pointing toward the nearest wall.
- B . APs must be aligned pointing toward each other.
- C . APs must be aligned in the same direction.
- D . APs can be aligned all four ways.
Refer to the exhibit.

A network engineer has identified that during a recent controller failure, several APs failed over to the tertiary controller instead of the secondary controller. The configuration from one of the APs is provided.
Which design consideration led to the issue?
- A . The secondary controller was at capacity.
- B . The secondary controller is an SSO configuration.
- C . The tertiary controller is an HA-SKU controller, so it took priority.
- D . The tertiary controller is in the same subnet as the primary controller.
During a wireless design all APs are mapped to designated controllers in case of a failure. The controllers are located in the same data center but in different racks. An AP failed over to a controller that was not defined on its High Availability tab. The customer does not want the AP to move back to its defined Cisco WLCs until they manually intervene.
What needs to be addressed in the design?
- A . Set AP fallback to enabled.
- B . Set AP fallback to disabled.
- C . Change the HA SKU secondary unit option.
- D . Change the default mobility domain.
Campus users report a poor wireless experience. An engineer investigating the issue notices that in high-density areas, the wireless clients fail to switch the AP to which are automatically connected. This sticky client behavior is causing roaming issues.
Which feature must the engineer configure?
- A . Load balancing and band select
- B . optimized roaming
- C . Layer 3 roaming
- D . Layer 2 roaming
B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/80/hdx_final/b_hdx_dg_final/high_density_experience_features_added_in_release_8_0.html
A wireless engineer must optimize RF performance for multiple buildings with multiple types of construction and user density.
Which two actions must be taken? (Choose two.)
- A . Configure Flexconnect groups for each building.
- B . Configure WMM profiles for each building.
- C . Configure AP groups for each area type.
- D . Configure RF profiles for each area type.
- E . Enable DTPC on the network.
C,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-10/config-guide/b_cg810/configuring_ap_groups.html
An engineer must decide the cell overlap for a wireless voice deployment.
Which Cisco measurement recommendation should be considered?
- A . The edge of the cell should be -67 dBm.
- B . The edge of the cell should be below 35 RSSI.
- C . The measurement should be done on the 2.4-GHz band.
- D . One AP should be deployed per 3000 square feet.
A
Explanation:
![]()
An engineer is designing a high-density WLAN for a 10,000-seat auditorium. The solution must take advantage of human attenuation, as well as the aesthetics of the room.
Where must the APs be placed?
- A . on the walls
- B . under the seats
- C . on the ceiling
- D . above the seating areas
An engineer is upgrading the legacy APs to 802.11ac Wave 2 capable APs. The existing gigabit uplinked switches provide 802.3at.
Which switch limitation is a concern?
- A . interface throughput
- B . high availability
- C . collision domains
- D . output power