Cisco 300-425 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-425
- Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
A wireless engineer is designing a wireless network for a warehouse using access points with internal antennas.
Which two elements have a negative effect on the wireless users? (Choose two.)
- A . wireless channels
- B . access point height
- C . client authentication
- D . client authorization
- E . absorption
B,E
Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/design_guide_c07-693245.html#_Toc309331086
A network engineer is working on a predictive WLAN design, the new wireless network must support access to Internet, email, voice, and the inventory database, to successfully support these services.
Which configuration must the engineer use for the signal strength levels and SNR on the planning tool?
- A . signal strength of -67 dBm, 25-dB SNR, and maximum 1 percent packet loss.
- B . signal strength of -67 dBm, 20-dB SNR, and maximum 5 percent, packet loss.
- C . signal strength of 67 dBm, 20-dB SNR, and maximum 1 percent packet loss.
- D . signal strength of-70 dBm,30-dB SNR. and maximum 10 percent packet loss.
A
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057site-survey-guidelines-wlan-00.html
A wireless consultant reviewing the installation of an old wireless network. The existing AireOS controllers are running software version 6.0.4539:44024. The customer is using OEAP and wants to keep this functionality.
Which licenses should the consultant propose with the latest controller software version?
- A . Base
- B . Premium
- C . WPlus
- D . Advanced
A customer celled with a requirement that internal clients must be on different subnets depending on the building they are in, AH access points are operating in local mode and will not be modified, and this is a single controller solution.
Which design approach creates the desired result?
- A . Create an SSID, place it to the desired VLAN under WLANs, and configure 802 lx in ISE to assign the correct VLAN based on the SSID from which the client is authenticating.
- B . Create FlexConnecI groups, place the access points in. and sat the correct VLAN to SSID mapping based on location.
- C . Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.
- D . Create mobility anchors for the SSID, and on the controller under the internal SSID. create a foreign map to the desired VLAN based on location.
A customer has a centralized wireless deployment with N+1 high availability and few open authentication SSIDs configured. After fail over, all APs are broadcasting all SSIDs, but the clients are assigned IP addresses from a different subnet. The WLANs on both WLCs are configured with the same dynamic interfaces.
Which feature must be incorporated in the wireless design of the second controller?
- A . RF Protocol
- B . AP Groups
- C . VLAN Select
- D . AAA Override
An engineer must perform a pre-deployment site survey for a new building in a high-security area. The design must provide a primary signal RSSI of -65 dBm for the clients.
Which two requirements complete This design? (Choose two)
- A . Site access
- B . AP model
- C . WLC model
- D . HAVC access
- E . Number of clients
B,E
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html
An engineer is configuring a centralized set of controllers for separate facilities.
Which two Cisco wireless architectures must be used to ensure flexible sizing of WLAN to VLAN mappings? (Choose two.)
- A . interface group
- B . mobility group
- C . AP group
- D . controller group
- E . RF group
An engineer is working for an enterprise and deployed a Cisco 9800 Series Wireless Controller. The wireless infrastructure serves the employees and guest users across the company. The engineer must configure the controller to alleviate the sticky client issue in the deployment.
Which action resolves the issue?
- A . Enable CHDM.
- B . Enable Optimize Roaming.
- C . Enable 802.11k.
- D . Enable data RSSI to -90db.
An engineer is performing an active survey of a network that must support different types of mobile devices. The devices must be able to run an application that requires a minimum RF of 73 dBm.
Which mobile device must be used for the survey?
- A . one that has a receiver sensitivity of -70 dBm
- B . one that has the lowest receiver sensitivity
- C . one that has the most updated wireless card
- D . one that has 802.11a wireless support
A wireless deployment in a high-density environment is being used by vendors to process credit card payment transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment.
Which feature on the wireless controller should have been incorporated in the design?
- A . RX SOP
- B . 802.11w
- C . AP Heartbeat Timeout
- D . Application Visibility Control
A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/configguide/b_cg85/advanced_wireless_tuning.html