Cisco 300-425 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-425
- Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
An engineer designs a new wireless network that uses a Cisco Catalyst 9800 Series wireless controller. The controller must be in a DMZ. The internal network is to be at the main on-premises data center of the customer. In addition, the customer wants to establish an EoIP tunnel to a Cisco 5520 WLC that is in a regional force.
How must this requirement be incorporated into the design?
- A . Use Cisco IOS-XE code that supports encryption of the data plane on the Catalyst 9800 WLC.
- B . Use AirOS code that supports encryption of the control plane on the 5520 WLC.
- C . Use Cisco IOS-XE code that supports encryption of the control plane on the Catalyst 9800 WLC.
- D . Use AirOS code that supports encryption of the data plane on the 5520 WLC.
DRAG DROP
A wireless consultant is creating a wireless design for a multistory building. The building will house several groups that will use the wireless network for different operations. Depending on how the wireless network is used, different wireless approach designs must be taken.
Drag and drop the services from the left onto the AP density levels on the right based on the wireless deployment requirements.


A customer deploys a new Cisco high-density wireless network within the open areas of a mall to provide free public wireless on 5 GHz. The existing mall tenants have their own wireless networks that are independently managed.
Which design approach minimizes channel utilization for the public network?
- A . Enable all 5-GHz channels that are supported by the region and use 40-MHz channels.
- B . Enable UNII-1 channels only and use 80-MHz channels.
- C . Enable UNII-1 channels only and use 20-MHz channels.
- D . Enable all 5-GHz channels that are supported by the region and use 20-MHz channels.
When a wireless network is designed for location services, how many APs must be heard by each location-ready AP at a signal level of -75 dBm or better?
- A . three APs
- B . no more than three APs
- C . two APs
- D . at least four APs
Refer to the exhibit.

A client roams between two APs that are registered to two different controllers, where each controller has an interface in the client subnet. Both controllers are running AireOS.
Which scenario explains the client roaming behavior?
- A . Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is moved from the original controller to the new controller.
- B . Controllers do not exchange mobility control messages (over UDP port 16666) andthe client database, entry is not moved from the original controller to the newcontroller.
- C . Controllers exchange mobility control messages (over UDP port 16666) and a new client session is started with the new controller.
- D . Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is tunneled from the original controller to the new controller.
A
Explanation:


An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol.
Which protocol must the engineer selects?
- A . 802.11i
- B . 802.11ac
- C . 802.11r
- D . 802.11e
C
Explanation:
![]()
While performing an AP-on-a-stick survey with a cell boundary of -67 dBm, an engineer is consistently reading SNR less than 15 dB in a particular area within the cell boundary.
What is causing this issue?
- A . Another signal is interfering with the AP.
- B . The engineer forgot to compensate for the wall type in that area.
- C . The AP transmit power is too low.
- D . The engineer is too far from the AP.
An engineer is using a Cisco AIR-2702i AP to conduct a Layer 1 site Survey, which mode is selected for the AP to discover non-Wi-Fi interference with metageek chanalyzer?
- A . FlexConnect
- B . Sniffer
- C . Monitor
- D . SE-connect
An engineer is designing a network deployment for a technology company. The company has four buildings with access points that must provide seamless wireless coverage and client roaming. The customer data center must have two WLCs and the core switches for the network.
Which type of wireless architecture must be used?
- A . cloud
- B . centralized
- C . autonomous
- D . distributed
Refer to the exhibit.

Which two statements about Cisco Prime Infrastructure are true? (Choose two.)
- A . It presents the recommended number of APs for the selected coverage area based on the selections made.
- B . Planning mode requires a special license in Cisco Prime Infrastructure.
- C . It shows the map editor feature in Cisco Prime Infrastructure.
- D . Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
- E . It shows the planning mode feature in Cisco Prime Infrastructure.
A, E
Explanation:
