Cisco 300-425 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-425
- Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC.
Which traffic flow must be allowed at the firewall to enable the communication?
- A . UDP port 16666
- B . IP protocol 97
- C . UDP port 97
- D . TCP port 97
B
Explanation:
![]()
A Cisco controller-based wireless network must support workgroup bridges. The APs configured as workgroup bridges must support wired and wireless clients. The wireless clients must connect to the spare radio.
What is the maximum number of wired client connections supported on a workgroup bridge?
- A . 20
- B . 25
- C . 30
- D . 35
A university lecture hall has a Cisco wireless high-density network with this configuration:
• 5 GHz only
• 20-MHz channels
• UNII-1, UNII-2, and UNII2-E channels
• TPC minimum = 8
• TPC maximum = 14
The lecture hall is 200 feet by 100 feet and has 16 Cisco APs that use directional antennas.
Which feature must be included in the design to mitigate and reduce high-channel utilization from rogue APs?
- A . band select
- B . DFS detection
- C . RxSOP
- D . 802.11w
An engineer is designing a network deployment for a college with six buildings Each building must have a WLC located in the IDF to support the APs. The wireless clients should be able to roam between the APs and the controllers.
Which type of wireless architecture should be used?
- A . Distributed
- B . Centralized
- C . Cloud
- D . Autonomous
A
Explanation:
Cloud-based architecture has controllers in the cloud, not on premises. Autonomous architecture means each AP is autonomous and is not managed by a WLC, distributed architecture is another term for autonomous architecture, so the same applies. Centralized architecture, a.k.a. split-MAC architecture is when all APs are managed centrally by WLCs, they do not need to be co-located. Understanding Cisco Wireless Architectures – CCNA Wireless 200-355 Official Cert Guide (2016) (apprize.best)
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob41dg/emob41dg-wrapper/ch2_Arch.html
An engineer has performed a predictive site survey for high-speed data and voice in an indoor office.
What is the recommended data rate with -67 dBm signal level for optimal VoWLAN design?
- A . 6 Mbps on 802.11 bgn
- B . 24 Mbps on 802.11 bgn
- C . 12 Mbps on 802.11 an
- D . 24 Mbps on 802.11 an
C
Explanation:

Refer to the exhibit.

During a post Mesh deployment survey, an engineer notices that frame collisions occur when MAP-1 and MAP-3 talk to RAP-2.
Which type of issue does the engineer need to address in the design?
- A . co-channel interference
- B . backhaul latency
- C . hidden node
- D . exposed node
C
Explanation:
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/WiMesh.pdf
A customer has a central Cisco WLC that manages APs in FlexConnect mode. The wireless infrastructure supports multiple small branches. One branch deploys new CCX wireless phones that are authenticated by a central Cisco ISE via PEAP/IMSCHAPv2, and traffic is switched locally. The customer must reduce the number of full authentication requests and optimize roaming for the new phones.
Which action accomplishes the requirement?
- A . Enable CCKM on the voice SSID and add APs to a FlexConnect group.
- B . Enable Aironet IE on the voice SSID and add APs to an AP group.
- C . Enable Aironet IE on the voice SSID and add APs to a FlexConnect group.
- D . Enable CCKM on the voice SSID and add APs to an AP group.
What is the wireless signal loss of large cases of liquid materials being stored in a warehouse environment?
- A . It is higher than dry goods.
- B . It is not impactful to the RF design.
- C . It is less than dry goods.
- D . It is impactful but overall negligible to the RF design.
An AP is receiving 802.11 packets on its 802.11a radio with an RSSI value of -77 dBm. The current AP is part of an AP group that has been assigned an RF profile with RX-SOP set to Medium for 802.11 a.
Which action does the AP take with the packets?
- A . All frames are classified as non-Wi-Fi frames and are not decoded by the 5 GHz radio.
- B . Frames are decoded by the 2.4 GHz radio.
- C . All frames are classified as non-Wi-Fi frames and are not decoded by the 2.4 GHz radio.
- D . Frames are decoded by the 5 GHz radio.
What protocol is necessary to support fast roaming for voice over WLAN?
- A . 802.11w
- B . 802.11ac
- C . 802.11r
- D . 802.11ax