Cisco 300-420 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-420
- Exam Name: Designing Cisco Enterprise Networks (ENSLD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
An engineer must design a QoS solution for a customer. The network currently supports data only, but the customer will roll out VoIP and IP video in conjunction with the new QoS solution. The engineer plans to use DiffServ.
To ensure priority for voice services, which model must the design include?
- A . 8-class model
- B . 4-class model
- C . 6-class model
- D . 12-class model
Which design consideration must be made when dual WAN Edge routers are deployed at a branch site?
- A . Use BGP AS-path prepending to influence egress traffic and use MED to influence ingress traffic from the branch.
- B . HSRP priorities must match the OMP routing policy to prefer one WAN Edge over the other.
- C . Traffic must be symmetrical as it egresses the WAN Edges and returns from remote sites for DPI to function properly.
- D . Configure BFD between WAN Edge routers to detect sub-second link failures.
Refer to the exhibit.

A customer experienced an unexpected network outage when the link between R1 and R2 went down. An architect must design a solution to ensure network continuity in the event the link fails again.
Which solution should the design include?
- A . Make R31 an L1 router.
- B . Make R3 an L1L2 router
- C . Make Area 0 L2-only
- D . Make R11 an L2 router.
Which OSPF area blocks LSA Type 3, 4 and 5, but allows a default summary route?
- A . normal
- B . stub
- C . NSSA
- D . totally stubby
DRAG DROP
Drag and drop the characteristics from the left onto the telemetry mode they apply to on the right.

DRAG DROP
Drag and drop the characteristics from the left onto the configuration protocols they describe on the right.

Refer to the exhibit.

A customer needs to apply QoS to the network management traffic passing through the GigabitEthernet0/2 interface. All eight queuing classes are in use, so the new requirement must be integrated into the existing policy.
Which solution must the customer choose?
- A . Mark traffic to DSCP CS5 and assign it to the SIGNALLING class. Then, baseline existing queue sizes to determine if additional bandwidth can be provisioned to the SIGNALLING class.
- B . Mark the traffic to DSCP CS4 and assign it to the SIGNALLING class. Then, prioritize traffic within the class.
- C . Mark the traffic to DSCP CS6 and assign it to the ROUTING class Then, prioritize traffic within the class.
- D . Mark the traffic to DSCP CS2 and assign it to the ROUTING class Then, baseline existing queue sizes to determine if additional bandwidth can be provisioned to the ROUTING class
Which topology within a network underlay eliminates the need for first hop redundancy protocols while improving fault tolerance, increasing resiliency, and simplifying the network?
- A . virtualized topology
- B . routed access topology
- C . Layer 2 topology
- D . logical fabric topology
Which PIM mode uses a shared tree only?
- A . bidirectional
- B . sparse
- C . dense
- D . source-specific
Refer to the exhibit

A customer requires maximum uptime for the data plane between R1 and R3 running OSPF.
Which solution must the design include for high availability if the routing process on R2 requires maintenance?
- A . BFD on all routers
- B . nonstop forwarding on R1 and R3
- C . nonstop forwarding on R3 only
- D . graceful restart on all routers
