Cisco 300-410 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-410
- Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

Users report that IP addresses cannot be acquired from the DHCP server. The DHCP server is configured as shown. About 300 total nonconcurrent users are using this DHCP server, but none of them are active for more than two hours per day.
Which action fixes the issue within the current resources?
- A . Modify the subnet mask to the network 192.168.1.0 255.255.254.0 command in the DHCP pool
- B . Configure the DHCP lease time to a smaller value
- C . Configure the DHCP lease time to a bigger value
- D . Add the network 192.168.2.0 255.255.255.0 command to the DHCP pool
Refer to the exhibit.

While monitoring VTY access to a router, an engineer notices that the router does not have any filter and anyone can access the router with username and password even though an ACL is configured.
Which command resolves this issue?
- A . access-class INTERNET in
- B . ip access-group INTERNET in
- C . ipv6 traffic-filter INTERNET in
- D . ipv6 access-class INTERNET in
Refer to the exhibit.


SW100 cannot receive routes from R1.
Which configuration resolves the issue?


- A . Option A
- B . Option B
- C . Option C
- D . Option C
Refer to the exhibit.

An engineer must filter prefixes that originate from AS65412. but it is not working correctly.
Which configuration must the engineer apply to R1 to resolve the issue?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

A shoe retail company implemented the uRPF solution for an antispoofing attack. A network engineer received the call that the branch A server is under an IP spoofing attack.
Which configuration must be implemented to resolve the attack?
A)

B)

C)

D)

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.


An engineer Is troubleshooting a routing loop on the network to reach the 172.16.3.0/16 from the OSPF domain.
Which configuration on router R1 resolves the Issue?
A)

B)

C)

D)

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

R1 cannot authenticate via TACACS.
Which configuration resolves the issue?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

R1 cannot authenticate via TACACS.
Which configuration resolves the issue?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

The neighbor relationship is not coming up.
Which two configurations bring the adjacency up? (Choose two)
- A . NY router ospf 1
area 0 authentication message-digest - B . LA
interface E 0/0
ip ospf message-digest-key 1 md5 Cisco123 - C . NY interface E 0/0
no ip ospf message-digest-key 1 md5 Cisco123 ip ospf authentication-key Cisco123 - D . LA
interface E 0/0
ip ospf authentication-key Cisco123 - E . LA
router ospf 1
area 0 authentication message-digest
B,E
Explanation:
The configuration on NY router is good for OSPF authentication. So we must enable OSPF authentication on LA router with the following commands: router ospf 1
area 0 authentication message-digest
interface E0/0
ip ospf message-digest-key 1 md5 Cisco123
A network engineer must configure a DMVPN network so that a spoke establishes a direct path to another spoke if the two must send traffic to each other. A spoke must send traffic directly to the hub if required.
Which configuration meets this requirement?


- A . Option
- B . Option
- C . Option
- D . Option