Cisco 300-410 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-410
- Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
An engineer configured access list NON-CISCO in a policy to influence routes

What are the two effects of this route map configuration? (Choose two.)
- A . Packets are not evaluated by sequence 10.
- B . Packets are evaluated by sequence 10.
- C . Packets are forwarded to the default gateway.
- D . Packets are forwarded using normal route lookup.
- E . Packets are dropped by the access list.
B,C
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/ip-routed-protocols/47121-pbr-cmds-ce.html
An engineer configured policy-based routing for a destination IP address that does not exist in the routing table.
How is the packet treated through the policy for configuring the set ip default next-hop command?
- A . Packets are not forwarded to the specific next hop.
- B . Packets are forwarded based on the routing table.
- C . Packets are forwarded based on a static route.
- D . Packets are forwarded to the specific next hop.
D
Explanation:
The set ip default next-hop command verifies the existence of the destination IP address in the routing table, and…+ if the destination IP address exists, the command does not policy route the packet, but forwards the packet based on the routing table.+ if the destination IP address does not exist, the command policy routes the packet by sending it to the specified next hop.
Reference: https://www.cisco.com/c/en/us/support/docs/ip/ip-routed-protocols/47121-pbr-cmds-ce.html
Refer to the exhibit.

A customer reports that networks in the 10.0.1.0/24 space do not appear in the RIP database.
What action resolves the issue?
- A . Remove summarization of 10.0.0.078.
- B . Permit 10.0.1.0/24 address in the ACL.
- C . Remove ACL on R1 blocking 10.0.1.0/24 network.
- D . Configure 10.0.1.0/24 network under RIP.
While BGP internet routes are redistributed to a lower class of router via RIP. packets are being dropped and routes are failing to be distributed in RIP.
Which action resolves the issue?
- A . Use OSPF instead of RIP to accept all BGP routes.
- B . Use the input-queue command to prevent the loss of packets.
- C . Use WFQ in the output queue of the high-performance router.
- D . Use RIP V2 to be able to use classless networks from BGP
Refer to the exhibit.

A network administrator has developed a Python script on the local Linux machine and is trying to transfer it to the router. However, the transfer fails.
Which action resolves this issue?
- A . The SSH service must be enabled with the crypto key generate rsa command.
- B . The SCP service must be enabled with the ip scp server enable command.
- C . The Python interpreter must first be enabled with the guestshell enable command.
- D . The SSH access must be allowed on the VTY lines using the transport input ssh command.
B
Explanation:
The error “Administratively disabled” means we need to enable SCP on the router with the command: Router(config)#ip scp server enable
Refer to the exhibit.

A CoPP policy is implemented to allow specific control traffic, but the traffic is not matching as expected and is getting unexpected behavior of control traffic.
Which action resolves the issue?
- A . Use match-any instruction in class-map
- B . Create a separate class map against each ACL.
- C . Create a separate class map lor ICMP traffic.
- D . Use default-class to match ICMP traffic
Refer to the exhibit.

Which two commands provide the administrator with the information needed to resolve the issue? (Choose two.)
- A . snmp user
- B . debug snmp engine-id
- C . debug snmpv3 engine-id
- D . debug snmp packet
- E . showsnmpv3 user
Refer to the exhibit.


The administrator configured the network devise for end-to-end reachability, but the ASBRs are not propagation routes to each other.
Which set of configuration resolves this issue?
- A . router bgp 100
neighbor 10.1.1.1 route-reflector-client
neighbor 10.1.2.2 route-reflector-client
neighbor 10.1.3.3 route-reflector-client - B . router bap 100
neighbor 10.1.1.1 next-hop-self
neighbor 10.1.2.2 next-hop-self
neighbor 10.1.3.3 next-hop-self - C . router bgp 100
neighbor 10.1.1.1 update-source Loopback0
neighbor 10.1.2.2 update-source Loopback0
neighbor 10.1.3.3 update-source Loopback0 - D . router bgp 100
neighbor 10.1.1.1 ebgp-multihop
neighbor 10.1.2.2 ebgp-multihop
neighbor 10.1.3.3 ebgp-multihop
Refer to the exhibit.


The network administrator configured the network to establish connectivity between all devices and notices that the ASBRs do not have routes for each other.
Which set of configurations resolves this issue?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

An engineer is trying to connect to a device with SSH but cannot connect. The engineer connects by using the console and finds the displayed output when troubleshooting.
Which command must be used in configuration mode to enable SSH on the device?
- A . no ip ssh disable
- B . ip ssh enable
- C . ip ssh version 2
- D . crypto key generate rsa