Cisco 300-410 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-410
- Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

Refer to the exhibit.
Which action restores the routes from neighbors while still filtering 1.1.1.0/24?
- A . Add a second line in the access list to permit any.
- B . Modify the route map to permit the access list instead of deny it
- C . Modify the access list to deny instead of permit it.
- D . Add a second sequence in the route map permit 20
Refer to the exhibit.

An error message "an OSPF-4-FLOOD_WAR” is received on SW2 from SW1. SW2 is repeatedly receiving its own link-state advertisement and flushes it from the network.
Which action resolves the issue?
- A . Change area 5 to a normal area from a nonstub area
- B . Resolve different subnet mask issue on the link
- C . Configure Layer 3 port channel on interfaces between switches
- D . Resolve duplicate IP address issue in the network
Refer to the exhibit.

A network engineer notices that R1 and R2 cannot establish an eBGP peering.
The following messages appear in the log:

Which configuration must the engineer apply to R1 to restore the eBGP peering?
A)

B)

C)

D)

- A . Option A
- B . Option B
- C . Option C
- D . Option D
A network administrator is tasked to permit http and https traffic only toward the internet from the User1 laptop to adhere to company’s security policy. The administrator can still ping to www.cisco.com


Which interface should the access list 101 be applied to resolve this issue?
- A . Interface G0/48 in the incoming direction
- B . Interface G0/0 in the outgoing direction.
- C . Interface S1/0 in the outgoing direction.
- D . Interface G0/0 in the incoming direction.
Refer to the exhibit.

An engineer implemented CoPP to limit Telnet traffic to protect the router CPU. It was noticed that the Telnet traffic did not pass through CoPP.
Which configuration resolves the issue?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Exhibit:

NTP is configured across the network infrastructure and Cisco DNA Center. An NTP issue was reported on the Cisco DNA Center at 17:15.
Which action resolves the issue?
- A . Check and resolve reachability between the WLC and the NTP server
- B . Reset the NTP server to resolve any synchronization issues for all devices
- C . Check and resolve reachability between Cisco DNA Center and the NTP server
- D . Check and configure NTP on the WLC and synchronize with Cisco DNA Center
D
Explanation:
Excessive time lag between Cisco DNA Center and device: The time difference between Cisco DNA Center and the device IP Address has drifted too far apart. Cisco DNA Center cannot process the device data accurately if the time difference is more than 3 minutes.
Reference: https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center-assurance/1-2-10/b_cisco_dna_assurance_1_2_10_ug/b_cisco_dna_assurance_1_2_10_ug_chapter_01101.html
What is the role of a route distinguisher via a VRF-Lite setup implementation?
- A . It extends the IP address to identify which VFP instance it belongs to.
- B . It manages the import and export of routes between two or more VRF instances
- C . It enables multicast distribution for VRF-Lite setups to enhance EGP routing protocol capabilities
- D . It enables multicast distribution for VRF-Lite setups to enhance IGP routing protocol capabilities
Refer to the exhibit.

Routers R1 and R2 have established a network adjacency using EIGRP, and both routers are advertising subnets to its neighbor. After issuing the show ip EIGRP topology all-links command in R1, some prefixes are no showing R2 as a successor.
Which action resolves the issue?
- A . Rectify the incorrect router ID in R2.
- B . Enable split-horizon.
- C . Configure the network statement on the neighbor.
- D . Resolve the incorrect metric on the link.
Refer to the exhibit.

An engineer is trying to redistribute OSPF to BGP, but not all of the routes are redistributed.
What is the reason for this issue?
- A . By default, only internal routes and external type 1 routes are redistributed into BGP
- B . Only classful networks are redistributed from OSPF to BGP
- C . BGP convergence is slow, so the route will eventually be present in the BGP table
- D . By default, only internal OSPF routes are redistributed into BGP
D
Explanation:
If you configure the redistribution of OSPF into BGP without keywords, only OSPF intra-area and inter-area routes are redistributed into BGP, by default.
You can redistribute both internal and external (type-1 & type-2) OSPF routes via this command:
DRouter(config-router)#redistribute ospf 1 match internal external 1 external 2‖
Reference: https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/5242-bgp-ospf-redis.html
Refer to the exhibit.

After a security audit, the administrator implemented an ACL in the route reflector. The RR became unreachable from any router in the network.
Which two actions resolve the issue? (Choose two.)
- A . Enable the ND proxy feature on the default gateway.
- B . Configure a link-local address on the Ethernet0/1 interface.
- C . Permit ICMPv6 neighbor discovery traffic in the ACL.
- D . Remove the ACL entry 80.
- E . Change the next hop of the default route to the link-local address of the default gateway.