Cisco 300-410 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-410
- Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.

A network engineer applied a filter for LSA traffic on OSPFv3 interarea routes on the area 5 ABR to protect advertising the internal routes of area 5 to the business partner network. All other areas should receive the area 5 internal routes. After the respective route filtering configuration is applied on the ABR, area 5 routes are not visible on any of the areas.
How must the filter list be applied on the ABR to resolve this issue?
- A . in the “in” direction for area 5 on router R1
- B . in the “out” direction for area 5 on router R1
- C . in the “in” direction for area 20 on router R2
- D . in the “out” direction for area 20 on router R2
Refer to the exhibit.

An engineer configured BGP and wants to select the path from 10.77.255.57 as the best path instead of current best path.
Which action resolves the issue?
- A . Configure AS_PATH prepend for the current best path
- B . Configure higher MED to select as the best path
- C . Configure AS_PATH prepend for the desired best path
- D . Configure lower LOCAL_PREF to select as the best path
D
Explanation:
From the output, we learn that the current best path is from 10.57.255.11 (which includes “…valid, confed-external, best“) and this path is 2 ASes away (64955 65003). Although there are some paths with only 1 AS away (path from 172.16.254.234 for example) but they were not chosen the best path so AS_PATH was not used to determine the best path -> Answers A and answer C are not correct. All the paths in the output have metric of 0 and this is the lowest (best) value for this attribute. If we configure higher MED then it is less preferred over other paths -> Answer B is not correct.
Only answer D is left but LOCAL_PREF attribute should be configured with higher value to be preferred so we hope “lower LOCAL_PREF” here means higher value. But this is the best answer.
An engineer configured two routers connected to two different service providers using BGP with default attributes. One of the links is presenting high delay, which causes slowness in the network.
Which BGP attribute must the engineer configure to avoid using the high-delay ISP link if the second ISP link is up?
- A . LOCAL_PREF
- B . MED
- C . WEIGHT
- D . AS-PATH
DRAG DROP
Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right.

Explanation:
Reference: https://www.rogerperkin.co.uk/featured/route-distinguisher-vs-route-target/
Refer to the exhibit.

Refer to the exhibit. an engineer is trying to get 192.168.32.100 forwarded through 10.1.1.1, but it was forwarded through 10.1.1.2.
What action forwards the packets through 10.1.1.1?
- A . Configure EIGRP to receive 192.168.32.0 route with lower admin distance.
- B . Configure EIGRP to receive 192.168.32.0 route with longer prefix than /19.
- C . Configure EIGRP to receive 192.168.32.0 route with lower metric.
- D . Configure EIGRP to receive 192.168.32.0 route with equal or longer prefix than /24.
A network administrator performed a Compact Flash Memory upgrade on a Cisco Catalyst 6509 Switch. Everything is functioning normally except SNMP, which was configured to monitor the bandwidth of key interfaces but the interface indexes are changed.
Which global configuration resolves the issue?
- A . snmp-server ifindex permanent
- B . snmp ifindex permanent
- C . snmp-server ifindex persist
- D . snmp ifindex persist
C
Explanation:
The SNMP ifIndex persistence feature provides an interface index (ifIndex) value that is retained and used when the router reboots. The ifIndex value is a unique identifying number associated with a physical or logical interface. In the following example, SNMP ifIndex persistence is enabled for all interfaces:
router(config)# snmp-server ifindex persist
Refer to the exhibit.

R1 must advertise all loopback interfaces IP addresses to neighbors, but EIGRP neighbors receive a summary route.
Which action resolves the issue?
- A . Redistribute connected routes into EIGRP Enable
- B . EIGRP on loopback Interfaces.
- C . Disable auto summarization on R1.
- D . Remove the 10.100.1.0/24 static route.
DRAG DROP
Drag and drop the MPLS terms from the left onto the correct definitions on the right.


Which routing protocol is used by the PE router to advertise routes to a CE router without redistribution or static after removing the RD tag from the P router?
- A . IS-IS
- B . OSPF
- C . BGPIPv4
- D . MP-BGP
How does LDP operate in an MPLS network?
- A . When topology changes occur such as a router failure, LDP generates peer discovery messages that terminate the LDP season to propagate an LSP change.
- B . When an adjacent LSR receives LDP discovery messages. TCP two-way handshake ensures that the LDP session has unidirectional connectivity.
- C . Peer routers establish the LDP session, and the LDP neighbors maintain and terminate the session by exchanging messages
- D . LDP notification messages allow LERs to exchange label information to determine the next hops within a particular LSP.