Cisco 300-410 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-410
- Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.



SanFrancisco and Boston routers are choosing slower links to reach each other despite the direct links being up.
Which configuration fixes the issue?

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

An engineer is troubleshooting failed access by contractors to the business application server via Telnet or HTTP during the weekend.
Which configuration resolves the issue?
A)

B)

C)
![]()
D)
![]()
- A . Option
- B . Option
- C . Option
- D . Option
The network administrator configured the router for Control Plane Policrg so that inbound SSH traffic is policed to 500 kbps This policy must apply to traffic coming in from 101010 0<24 and 192 168 10.0/24 networks.

The Control Rane Policing is not applied to SSH traffic and SSH is open to use any bandwidth available.
Which configuration resolves this issue?
A)

B)

C)

D)
![]()
- A . Option
- B . Option
- C . Option
- D . Option
Refer to the exhibit.

A junior engineer updated a branch router configuration. Immediately after the change, the engineer receives calls from the help desk that branch personnel cannot reach any network destinations.
Which configuration restores service and continues to block 10.1.1.100/32?
- A . route-map FILTER-IN deny 5
- B . ip prefix-list 102 seq 15 permit 0.0.0.0/32 le 32
- C . ip prefix-list 102 seq 5 permit 0.0.0.0/32 le 32
- D . route-map FILTER-IN permit 20
D
Explanation:
By using “deny” keyword in a route-map, we can filter out the prefix specified in the prefix-list.
But there is an implicit “deny all” statement in the prefix-list so we must permit other prefixes
with “permit” keyword in the route-map.
An engineer configured routing between multiple OSPF domains and introduced a routing loop that caused network instability.
Which action resolves the problem?
- A . Set a tag using the redistribute command toward a domain and deny inbound m the other domain by a matching tag
- B . Set a tag using the redistribute command toward a different domain and deny the matching tag when exiting from that domain
- C . Set a tag using the network command in a domain and use the route-map command to deny the matching lag when exiting toward a different domain
- D . Set a tag using the network command in a domain and use the route-map command to deny the matching tag when entering into a different domain
What is the purpose of the DHCPv6 Guard?
- A . It messages between a DHCPv6 server and a DHCPv6 client ( or relay agent).
- B . It shows that clients of a DHCPv5 server are affected.
- C . It block DHCPv6 messages from relay agents to a DHCPv6 server.
- D . It allows DHCPv6 replay and advertisements from (rouge) DHCPv6 servers.
A
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6_fhsec/configuration/xe-16/ip6fxe-16-book/ip6-dhcpv6-guard.html
Which Cisco VPN technology can use multipoint tunnel, resulting in a single GRE tunnel interface on the hub, to support multiple connections from multiple spoke devices?
- A . DMVPN
- B . GETVPN
- C . Cisco Easy VPN
- D . FlexVPN
Refer to the exhibit.

An engineer must configure OSPF with R9 and R10 and configure redistribution between OSPF and RIP causing a routing loop.
Which configuration on R9 and R10 meets this objective?
A)

B)

C)

D)

- A . Option
- B . Option
- C . Option
- D . Option
An engineer received a ticket about a router that has reloaded. The monitoring system graphs show different traffic patterns between logical and physical interfaces when the router is rebooted.
Which action resolves the issue?
- A . Configure the snmp ifindex persist command globally.
- B . Clear the logical interfaces with snmp ifindex clear command
- C . Configure the snmp ifindex persist command on the physical interfaces.
- D . Trigger a new snmpwalk from the monitoring system to synchronize interface OlDs
Which command displays the IP routing table information that is associated with VRF-Lite?
- A . show ip vrf
- B . show ip route vrf
- C . show run vrf
- D . show ip protocols vrf
B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/50sg/configuration/guide/Wrapper-46SG/vrf.html#wp1045708