Cisco 300-410 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-410
- Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
R2 has a locally originated prefix 192.168.130.0/24 and has these configurations:

What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?
- A . R1 sees 192.168.130.0/24 as two AS hops away instead of one AS hop away.
- B . R1 does not accept any routes other than 192.168.130.0/24
- C . R1 does not forward traffic that is destined for 192.168.30.0/24
- D . Network 192.168.130.0/24 is not allowed in the R1 table
Refer to the exhibit.

An engineer must filter EIGRP updates that are received to block all 10 10 10.0/24 prefixes. The engineer tests the distribute list and finds one associated prefix.
Which action resolves the issue?
- A . There is a permit in the route map that allows this prefix A deny 20 statement is required with a match condition to match a new ACL that denies all prefixes
- B . There is a permit in the ACL that allows this prefix into EI6RP. The ACL should be modified to deny 10.10.10.0 0.0.0.255.
- C . There is a permit in the route map that allows this prefix A deny 20 statement is required with no match condition to block the prefix.
- D . There is a permit in the ACL that allows this prefix into EIGRP. The ACL should be modified to deny 10.10.10.0 255.255.255.0.
Refer to the exhibit.

The R1 routing table has the prefixes for the FTP1 and FTP2 file servers.
A network engineer must configure the R1 with these requirements:
✑ Host1 must use the FTP1 fileserver.
✑ Host2 must use the FTP2 fileserver.
Which configuration meets the requirement on R1?
A)

B)

C)

D)

- A . Option A
- B . Option B
- C . Option C
- D . Option D
Refer to the exhibit.

An IP SLA is configured to use the backup default route when the primary is down, but it is not working as desired.
Which command fixes the issue?
- A . R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2 10 track 1
- B . R1(config)# ip route 0.0.0.0.0.0.0.0.2.2.2.2
- C . R1(config)#ip sla track 1
- D . R1(config)# ip route 0.0.0.0.0.0.0.0.1.1.1.1 track 1
D
Explanation:
Reference: Note: By default Static Router AD value-1 hence ip route 0.0.0.0. 0.0.0.0. 1.1.1.1 track 1 means AD-1 which must be less than of back up route AD.
Define the backup route to use when the tracked object is unavailable. !— The administrative distance of the backup route must be greater than !— the administrative distance of the tracked route.!— If the primary gateway is unreachable, that route is removed!— and the backup route is installed in the routing table!— instead of the tracked route.
https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200785-ISP-Failover-with-default-routes-using-I.html
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/118962-configure-asa-00.html
Which two statements about VRF-Lite configurations are true? (Choose two.)
- A . They support the exchange of MPLS labels
- B . Different customers can have overlapping IP addresses on different VPNs
- C . They support a maximum of 512.000 routes
- D . Each customer has its own dedicated TCAM resources
- E . Each customer has its own private routing table.
- F . They support IS-IS
Refer to the exhibit.


An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available.
How is this issue resolved?
- A . Use the icmp-echo command to track both default routes
- B . Use the same AD for both default routes
- C . Start IP SLA by matching numbers for track and ip sla commands
- D . Start IP SLA by defining frequency and scheduling it
D
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200785-ISP-Failover-with-default-routes-using-I.html
In the above configuration we have not had activated our IP SLA operation. We can start it with this command:
R1(config)#ip sla schedule 100 life forever start-time now
Also we should specific the rate of ICMP echo:
R1(config-ip-sla-echo)#frequency 5 //Send ICMP echo every 5 seconds
Refer to the exhibit.

The network administrator configured redistribution on an ASBR to reach to all WAN networks but failed.
Which action resolves the issue?
- A . The route map must have the keyword prefix-list to evaluate the prefix list entries
- B . The OSPF process must have a metric when redistributing prefixes from EIGRP.
- C . The route map EIGRP->OSPF must have the 10.0.106.0/24 entry to exist in one of the three prefix lists to pass
- D . EIGRP must redistribute the 10.0.106.0/24 route instead of using the network statement
A
Explanation:
In order to use a prefix-list in a route-map, we must use the keyword “prefix-list” in the “match” statement..
For example:
match ip address prefix-list WAN_PREFIXES
Without this keyword, the router will try to find an access-list with the same name instead.
Refer to the exhibit.

The primary link between R1 and R2 went down but R3 is still advertising the 192.166.200.0/24 network to R1 and the 192.166.100.0/24 network to R2, which creates a loop.
Which action resolves the issue?
- A . Configure the eigrp stub command under the ElGRP process on R3
- B . Configure the summary address 192.168.0.0 255.255.0.0 100 command on R3
- C . Configure the eigrp stub leak-map command under the EIGRP process on R1
- D . Configure the eigrp stub command under the ElGRP process on R2
Refer to the exhibit.


Users on a call center report that they cannot browse the internet on Saturdays during the afternoon.
Which configuration resolves the issue?
A)

B)

C)
![]()
D)

- A . Option A
- B . Option B
- C . Option C
- D . Option D
What are two characteristics of a VRF instance? (Choose two)
- A . It is defined by the VPN membership of a customer site attached to a P device.
- B . Each VRF has a different set of routing and CEF tables.
- C . AII VRFS share customers routing and CEF tables.
- D . An interface must be associated to one VRF
- E . A customer site can be associated to different VRFs.