Cisco 300-410 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-410
- Exam Name: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Refer to the exhibit.


A customer reported a failure and intermittent disconnection between two office buildings site X and site Y The network team finds that site X and site Y are exchanging email application traffic with the data center network.
Which configuration resolves the issue between site X and site Y?
A)
![]()
B)

C)
![]()
D)
![]()
- A . Option A
- B . Option B
- C . Option C
- D . Option D
What are two MPLS label characteristics? (Choose two.)
- A . The label edge router swaps labels on the received packets.
- B . Labels are imposed in packets after the Layer 3 header.
- C . LDP uses TCP for reliable delivery of information.
- D . An MPLS label is a short identifier that identifies a forwarding equivalence class.
- E . A maximum of two labels can be imposed on an MPLS packet.
C,D
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/multiprotocol-label-switching-mpls/mpls/4649-mpls-faq-4649.html
Refer to the exhibit.

A user has set up an IP SLA probe to test if a non-SLA host web server on IP address 10.1.1.1 accepts HTTP sessions prior to deployment. The probe is failing.
Which action should the network administrator recommend for the probe to succeed?
- A . Re-issue the ip sla schedule command.
- B . Add icmp-echo command for the host.
- C . Add the control disable option to the tcp connect.
- D . Modify the ip sla schedule frequency to forever.
Refer to the exhibit.

R5 should not receive any routes originated in the EIGRP domain.
Which set of configuration changes removes the EIGRP routes from the R5 routing table to fix the issue?
- A . R4
route-map O2R deny 10
match tag 111
route-map O2R permit 20
!
router rip
redistribute ospf 1 route-map O2R metric 1 - B . R2
route-map E20 deny 20
R4
route-map O2R deny 10
match tag 111
!
router rip
redistribute ospf 1 route-map O2R metric 1 - C . R4
route-map O2R permit 10
match tag 111
route-map O2R deny 20
!
router rip
redistribute ospf 1 route-map O2R metric 1 - D . R4
route-map O2R deny 10
match tag 111
!
router rip
redistribute ospf 1 route-map O2R metric 1
A
Explanation:
In this question, routes from EIGRP domain are redistributed into OSPF (with tag 111) then RIPv2 but without any filtering so R5 learns all routes from both EIGRP and OSPF domain. If we only want R5 to learn routes from OSPF domain then we must filter out routes with tag 111 and permit other routes.
The line “route-map O2R permit 20” is important to allow other routes because of the implicit deny all at the end of each route-map.
Which IPv6 first hop security feature controls the traffic necessary for proper discovery of neighbor device operation and performance?
- A . RA Throttling
- B . Source or Destination Guard
- C . ND Multicast Suppression
- D . IPv6 Snooping
A company is expanding business by opening 35 branches over the Internet. A network engineer must configure DMVPN at the branch routers to connect with the hub router and allow NHRP to add spoke routers securely to the multicast NHRP mappings automatically.
Which configuration meets this requirement at the hub router?
- A . interface Tunnel0
ip address 10.0.0.1 255.255.255.0
ip nhrp authentication KEY1
ip nhrp nhs dynamic
ip nhrp network-id 10
tunnel mode mgre auto - B . interface Tunne10
ip address 10.0.0.1 255.255.255.0
ip nhrp authentication KEY1
ip nhrp registration no-unique
ip nhrp network-id 10
tunnel mode gre nmba - C . interface Tunnel0
ip address 10.0.0.1 255.255.255.0
ip nhrp authentication KEY1
ip nhrp map multicast dynamic
ip nhrp network-id 10
tunnel mode gre multi pointe - D . interface Tunnel0
ip address 10.0.0.1 255.255.255.0
ip nhrp authentication KEY 1
ip nhrp map multicast 224.0.0.0
ip nhrp network-id 10
tunnel mode gre ipv4
C
Explanation:
The command “ip nhrp map multicast dynamic” allows NHRP to automatically add spoke routers to the
multicast NHRP mappings.
What is a prerequisite for configuring BFD?
- A . Jumbo frame support must be configured on the router that is using BFD.
- B . All routers in the path between two BFD endpoints must have BFD enabled.
- C . Cisco Express Forwarding must be enabled on all participating BFD endpoints.
- D . To use BFD with BGP, the timers 3 9 command must first be configured in the BGP routing process.
C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1043332
When configuring Control Plane Policing on a router to protect it from malicious traffic, an engineer observes that the configured routing protocols start flapping on that device.
Which action in the Control Plane Policy prevents this problem in a production environment while achieving the security objective?
- A . Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rates and apply the Control Plane Policy in the output direction
- B . Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rates and apply the Control Plane Policy in the input direction
- C . Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rates and apply the Control Plane Policy m the input direction
- D . Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rates and apply the Control Plane Policy m the output direction
Refer to the exhibit.

A network engineer notices that the configured track option is down.
Which configuration resolves the issue*?
- A . ip sla schedule 10 start-time now
- B . ip sla schedule 10 start-time pending life forever
- C . ip sla schedule 10 no timeout
- D . ip sla schedule 10 no threshold
What is a function of the IPv6 DHCP Guard feature for DHCP messages?
- A . Only access lists are supported for matching traffic.
- B . All client messages are always switched regardless of the device role.
- C . It blocks only DHCP request messages.
- D . If the device is configured as a DHCP server, no message is switched.