HP HPE7-A02 Practice Exams
Last updated on Oct 23,2026- Exam Code: HPE7-A02
- Exam Name: HPE Network Security Professional Exam
- Certification Provider: HP
- Latest update: Oct 23,2026
A company has an HPE Aruba Networking ClearPass cluster with several servers.
ClearPass Policy Manager (CPPM) is set up to:
. Update client attributes based on Syslog messages from third-party appliances
. Have the clients reauthenticate and apply new profiles to the clients based on the updates
To ensure that the correct profiles apply, what is one step you should take?
- A . Configure a CoA action for all tag updates in the ClearPass Device Insight integration settings.
- B . Tune the CoA delay on the ClearPass servers to a value of 5 seconds or greater.
- C . Set the cluster’s Endpoint Context Servers polling interval to a value of 5 seconds or less.
- D . Configure the cluster to periodically clean up (delete) unknown endpoints.
B
Explanation:
To ensure that the correct profiles apply after client attributes are updated based on Syslog messages, you should tune the Change of Authorization (CoA) delay on the ClearPass servers to a value of 5 seconds or greater. This delay allows sufficient time for the attribute updates to be processed and for the reauthentication to occur correctly, ensuring that the updated profiles are accurately applied to the clients.
You are using Wireshark to view packets captured from HPE Aruba Networking infrastructure, but you’re not sure that the packets are displaying correctly. In which circumstance does it make sense to configure Wireshark to ignore protection bits with the IV for the 802.11 protocol?
- A . When the traffic was captured on the data plane of an HPE Aruba Networking gateway and sent to a remote IP.
- B . When the traffic was mirrored from an AOS-CX switch port connected to an AP.
- C . When the traffic was captured from an AP with HPE Aruba Networking Central.
- D . When the traffic was captured on the control plane of an HPE Aruba Networking MC and sent to a remote IP.
C
Explanation:
A company uses HPE Aruba Networking ClearPass Policy Manager (CPPM) as a TACACS+ server to authenticate managers on its AOS-CX switches. You want to assign managers to groups on the AOS-CX switch by name.
How do you configure this setting in a CPPM TACACS+ enforcement profile?
- A . Add the Shell service and set autocmd to the group name.
- B . Add the Shell service and set priv-Ivl to the group name.
- C . Add the Aruba:Common service and set Aruba-Admin-Role to the group name.
- D . Add the Aruba:Common service and set Aruba-Priv-Admin-User to the group name.
C
Explanation:
To assign managers to groups on the AOS-CX switch by name using HPE Aruba Networking ClearPass Policy Manager (CPPM) as a TACACS+ server, you should add the Aruba service to the TACACS+ enforcement profile and set the Aruba-Admin-Role to the group name. This configuration ensures that the appropriate administrative roles are assigned to managers based on their group membership, allowing for role-based access control on the AOS-CX switches.
Reference: ClearPass TACACS+ configuration guides and AOS-CX switch management documentation provide details on setting up enforcement profiles and using the Aruba-Admin-Role attribute for role assignment.
A company has wired VolP phones, which transmit tagged traffic and connect to AOS-CX switches. The company wants to tunnel the phones’ traffic to an HPE Aruba Networking gateway for applying security policies.
What is part of the correct configuration on the AOS-CX switches?
- A . UBT mode set to VLAN extend
- B . A VXLAN VNI mapped to the VLAN assigned to the VolP phones
- C . VLANs assigned to the VolP phones configured on the switch uplinks
- D . A UBT reserved VLAN set to a VLAN dedicated for that purpose
D
Explanation:
To tunnel VoIP phone traffic from AOS-CX switches to an HPE Aruba Networking gateway, you need to configure a User-Based Tunneling (UBT) reserved VLAN on the switches. This VLAN is dedicated for tunneling purposes and ensures that the VoIP traffic is correctly identified and tunneled to the gateway where security policies can be applied.
HPE Aruba Networking Central displays an alert about an Infrastructure Attack that was detected. You go to the Security > RAPIDS events and see that the attack was "Detect adhoc using Valid SSID."
What is one possible next step?
- A . Use HPE Aruba Networking Central floorplans or the detecting AP identities to locate the general area for the threat.
- B . Look for the IP address associated with the offender and then check for that IP address among HPE Aruba Networking Central clients.
- C . Make sure that you have tuned the threshold for that check, as false positives are common for it.
- D . Make sure that clients have updated drivers, as faulty drivers are a common explanation for this attack type.
A
Explanation:
When HPE Aruba Networking Central detects an Infrastructure Attack, such as "Detect adhoc using Valid SSID," the next step is to locate the general area of the threat. You can use HPE Aruba Networking Central floorplans or the identities of the detecting APs to pinpoint the approximate location of the adhoc network. This allows you to physically investigate and address the source of the threat, ensuring that unauthorized or rogue networks are quickly identified and mitigated.
Reference: Aruba Central documentation and RAPIDS events management guides offer strategies for locating and responding to detected security threats, emphasizing the use of network tools and floorplans to effectively address potential vulnerabilities.
What role can Internet Key Exchange (IKE)/IKEv2 play in an HPE Aruba Networking client-to-site VPN?
- A . It provides an alternative to IPsec that is suitable for legacy clients.
- B . It provides a more modern and secure alternative to IPsec.
- C . It helps to negotiate the IPsec SA automatically and securely.
- D . It helps remote clients download IPsec profiles for later use.
C
Explanation:
Internet Key Exchange (IKE)/IKEv2 plays a crucial role in an HPE Aruba Networking client-to-site VPN by helping to negotiate the IPsec Security Association (SA) automatically and securely. IKE/IKEv2 handles the authentication and key exchange processes, ensuring that both the client and the VPN gateway can establish a secure IPsec tunnel.
You are setting up an HPE Aruba Networking VIA solution for a company. You have already created a VPN pool with IP addresses for the remote clients. During tests, however, the clients do not receive IP addresses from that pool.
What is one setting to check?
- A . That the pool uses valid, public IP addresses that are assigned to the company
- B . That the pool is associated with the role to which the VIA clients are being assigned
- C . That the pool uses an IP subnet that is different from any subnet configured on the VPNC
- D . That the pool is referenced in the clients’ VIA Connection Profile
B
Explanation:
If VIA clients are not receiving IP addresses from the configured VPN pool, one setting to check is whether the pool is associated with the role to which the VIA clients are being assigned. The association between the IP pool and the role ensures that clients assigned to that role receive IP addresses from the correct pool.
A company uses both HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI).
What is one way integrating the two solutions can help the company implement Zero Trust Security?
- A . CPPM can provide CPDI with custom device fingerprint definitions in order to enhance the company’s total visibility.
- B . CPDI can provide CPPM with extra information about users’ identity; CPPM can then use that information to apply the correct identity-based enforcement.
- C . CPPM can inform CPDI that it has assigned a particular Aruba-User-Role to a client; CPDI can then use that information to reclassify the client.
- D . CPDI can use tags to inform CPPM that clients are using prohibited applications; CPPM can then tell the network infrastructure to quarantine those clients.
D
Explanation:
Integrating HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI) can help a company implement Zero Trust Security by allowing CPDI to use tags to inform CPPM that clients are using prohibited applications. CPPM can then take action, such as telling the network infrastructure to quarantine those clients, ensuring that only compliant and trusted devices have network access.
A company uses both HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI).
What is one way integrating the two solutions can help the company implement Zero Trust Security?
- A . CPPM can provide CPDI with custom device fingerprint definitions in order to enhance the company’s total visibility.
- B . CPDI can provide CPPM with extra information about users’ identity; CPPM can then use that information to apply the correct identity-based enforcement.
- C . CPPM can inform CPDI that it has assigned a particular Aruba-User-Role to a client; CPDI can then use that information to reclassify the client.
- D . CPDI can use tags to inform CPPM that clients are using prohibited applications; CPPM can then tell the network infrastructure to quarantine those clients.
D
Explanation:
Integrating HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI) can help a company implement Zero Trust Security by allowing CPDI to use tags to inform CPPM that clients are using prohibited applications. CPPM can then take action, such as telling the network infrastructure to quarantine those clients, ensuring that only compliant and trusted devices have network access.
A company uses both HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI).
What is one way integrating the two solutions can help the company implement Zero Trust Security?
- A . CPPM can provide CPDI with custom device fingerprint definitions in order to enhance the company’s total visibility.
- B . CPDI can provide CPPM with extra information about users’ identity; CPPM can then use that information to apply the correct identity-based enforcement.
- C . CPPM can inform CPDI that it has assigned a particular Aruba-User-Role to a client; CPDI can then use that information to reclassify the client.
- D . CPDI can use tags to inform CPPM that clients are using prohibited applications; CPPM can then tell the network infrastructure to quarantine those clients.
D
Explanation:
Integrating HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI) can help a company implement Zero Trust Security by allowing CPDI to use tags to inform CPPM that clients are using prohibited applications. CPPM can then take action, such as telling the network infrastructure to quarantine those clients, ensuring that only compliant and trusted devices have network access.