HP HPE0-J68 Practice Exams
Last updated on Oct 23,2026- Exam Code: HPE0-J68
- Exam Name: HPE Storage Solutions
- Certification Provider: HP
- Latest update: Oct 23,2026
Question #161
Which actions can be done within InfoSight Cross-Stack Analytics for VMware and Hyper-V? (Choose two.)
- A . View replication policies
- B . Find noisy neighbors
- C . Locate inactive VMs
- D . Modify administrative privileges
- E . Review backup schedules
Correct Answer: B,C
B,C
Explanation:
HPE InfoSight Cross-Stack Analytics for VMware and Hyper-V provides a comprehensive view of the virtual environment, allowing users to monitor and analyze various aspects of their infrastructure. Two key actions that can be performed within this tool are finding noisy neighbors (Option B) and locating inactive VMs (Option C).
Find noisy neighbors: This feature helps identify virtual machines (VMs) that are consuming excessive resources and negatively impacting the performance of other VMs within the environment. By identifying these "noisy neighbors," administrators can take corrective action to optimize resource allocation and improve overall system performance.
Locate inactive VMs: This functionality allows administrators to detect VMs that are consuming resources but are not actively in use. Identifying and addressing these inactive VMs can help free up resources and improve the efficiency of the virtual environment.
These capabilities make InfoSight Cross-Stack Analytics a powerful tool for maintaining optimal performance in VMware and Hyper-V environments.
Reference: HPE InfoSight for Servers
HPE Cross-Stack Analytics Overview
B,C
Explanation:
HPE InfoSight Cross-Stack Analytics for VMware and Hyper-V provides a comprehensive view of the virtual environment, allowing users to monitor and analyze various aspects of their infrastructure. Two key actions that can be performed within this tool are finding noisy neighbors (Option B) and locating inactive VMs (Option C).
Find noisy neighbors: This feature helps identify virtual machines (VMs) that are consuming excessive resources and negatively impacting the performance of other VMs within the environment. By identifying these "noisy neighbors," administrators can take corrective action to optimize resource allocation and improve overall system performance.
Locate inactive VMs: This functionality allows administrators to detect VMs that are consuming resources but are not actively in use. Identifying and addressing these inactive VMs can help free up resources and improve the efficiency of the virtual environment.
These capabilities make InfoSight Cross-Stack Analytics a powerful tool for maintaining optimal performance in VMware and Hyper-V environments.
Reference: HPE InfoSight for Servers
HPE Cross-Stack Analytics Overview
Question #162
Your customer is running out of space on their HPE StoreOnce while it appears there are barely any backups present.
Which of the following options could resolve this?
- A . Ensure HPE StoreOnce blackout windows allow housekeeping to run
- B . Run defragmentation via HPE StoreOnce CLI
- C . Configure backup application to run unmap when backup is expired
- D . Trigger space reclamation via HPE StoreOnce local Ul
Correct Answer: A
A
Explanation:
If an HPE StoreOnce system appears to be running out of space despite having few backups, it is crucial to ensure that HPE StoreOnce blackout windows allow housekeeping to run. Housekeeping processes are essential for reclaiming space by cleaning up expired backups and optimizing storage.
If these processes are blocked or not scheduled correctly, the system may show limited available space even when data should be purged.
For more details, refer to:
HPE StoreOnce User Guide
A
Explanation:
If an HPE StoreOnce system appears to be running out of space despite having few backups, it is crucial to ensure that HPE StoreOnce blackout windows allow housekeeping to run. Housekeeping processes are essential for reclaiming space by cleaning up expired backups and optimizing storage.
If these processes are blocked or not scheduled correctly, the system may show limited available space even when data should be purged.
For more details, refer to:
HPE StoreOnce User Guide
Question #163
Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)
- A . CIFS
- B . NTFS
- C . VFS
- D . ZFS
- E . NFS
Correct Answer: A,E
A,E
Explanation:
In HPE StoreOnce environments, the two most commonly used file protocols are CIFS (Common Internet File System) and NFS (Network File System).
CIFS: This protocol is widely used in Windows environments for file sharing. It enables users and applications to access files on remote servers as if they were local, making it ideal for integration with Windows-based systems.
NFS: This protocol is commonly used in Unix and Linux environments for file sharing. It allows a user on a client computer to access files over a network much like local storage is accessed.
These protocols are integral to HPE StoreOnce’s capability to provide flexible and efficient file-based backup and recovery solutions across different operating environments.
Reference: HPE StoreOnce Overview
HPE File Protocols
A,E
Explanation:
In HPE StoreOnce environments, the two most commonly used file protocols are CIFS (Common Internet File System) and NFS (Network File System).
CIFS: This protocol is widely used in Windows environments for file sharing. It enables users and applications to access files on remote servers as if they were local, making it ideal for integration with Windows-based systems.
NFS: This protocol is commonly used in Unix and Linux environments for file sharing. It allows a user on a client computer to access files over a network much like local storage is accessed.
These protocols are integral to HPE StoreOnce’s capability to provide flexible and efficient file-based backup and recovery solutions across different operating environments.
Reference: HPE StoreOnce Overview
HPE File Protocols
Question #164
Select the correct description of RTO.
- A . Maximum amount of acceptable data loss in the event a disaster occurs
- B . Maximum elapsed time allowed to complete the recovery of application processing
- C . A property that enables a system to continue operating properly
- D . A set of policies, tools, and procedures to enable the recovery or continuation of vital technology infrastructure
Correct Answer: B
B
Explanation:
Recovery Time Objective (RTO) refers to the maximum amount of time that is allowed to elapse before the recovery of application processing is completed after a disaster or failure occurs. This metric is crucial for business continuity planning as it defines the acceptable downtime that the business can tolerate before the system is back online and fully functional.
For example, if an RTO is set to 2 hours, the business must ensure that the affected systems are restored and operational within that timeframe. For more detailed information, see:
HPE Storage Solutions
B
Explanation:
Recovery Time Objective (RTO) refers to the maximum amount of time that is allowed to elapse before the recovery of application processing is completed after a disaster or failure occurs. This metric is crucial for business continuity planning as it defines the acceptable downtime that the business can tolerate before the system is back online and fully functional.
For example, if an RTO is set to 2 hours, the business must ensure that the affected systems are restored and operational within that timeframe. For more detailed information, see:
HPE Storage Solutions
Question #165
Which storage protocol is supported by virtual connect Flex-10?
- A . FCoE
- B . FC
- C . ISCSI
- D . FCIP
Correct Answer: A
A
Explanation:
Virtual Connect Flex-10 modules support Fibre Channel over Ethernet (FCoE). FCoE is a storage protocol that encapsulates Fibre Channel frames within Ethernet packets, allowing for the consolidation of LAN and SAN traffic over a single Ethernet infrastructure. This protocol is especially useful in converged network environments where space and cabling efficiency are critical. Flex-10 technology allows for the dynamic allocation of bandwidth between different network protocols, and FCoE is fully supported within this architecture.
For more details, refer to the following HPE Storage references:
HPE Virtual Connect Technology
A
Explanation:
Virtual Connect Flex-10 modules support Fibre Channel over Ethernet (FCoE). FCoE is a storage protocol that encapsulates Fibre Channel frames within Ethernet packets, allowing for the consolidation of LAN and SAN traffic over a single Ethernet infrastructure. This protocol is especially useful in converged network environments where space and cabling efficiency are critical. Flex-10 technology allows for the dynamic allocation of bandwidth between different network protocols, and FCoE is fully supported within this architecture.
For more details, refer to the following HPE Storage references:
HPE Virtual Connect Technology
Question #166
You have proposed a Primera array to a customer for primary storage. The customer currently has an older HPE 3PAR array and will continue to use it moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
- A . 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
- B . Target drive type must match source drive type
- C . 2-port 10 Gb Ethernet Adapter (NIC) is required in each array
- D . Check that the 3PAR OS version is supported
- E . Required license must be provided
- F . RMC 6.2
Correct Answer: D,F
D,F
Explanation:
When proposing a Primera array and ensuring high availability with an existing HPE 3PAR array, there are specific RMC (Recovery Manager Central) Peer Copy prerequisites that need to be addressed: Check that the 3PAR OS version is supported (Option D): It is crucial to verify that the HPE 3PAR OS version is compatible with the RMC version being used. Incompatibility between the OS versions can lead to failures in replication or other high availability features.
RMC 6.2 (Option F): RMC 6.2 is the required version for ensuring compatibility with the features necessary for Peer Copy between Primera and 3PAR arrays. Ensuring that this version is installed and correctly configured is essential for successful implementation.
These prerequisites help ensure that the high availability setup between the Primera and 3PAR arrays functions correctly and that the data protection mechanisms are reliable.
Reference: HPE RMC Overview
HPE 3PAR and Primera Compatibility
D,F
Explanation:
When proposing a Primera array and ensuring high availability with an existing HPE 3PAR array, there are specific RMC (Recovery Manager Central) Peer Copy prerequisites that need to be addressed: Check that the 3PAR OS version is supported (Option D): It is crucial to verify that the HPE 3PAR OS version is compatible with the RMC version being used. Incompatibility between the OS versions can lead to failures in replication or other high availability features.
RMC 6.2 (Option F): RMC 6.2 is the required version for ensuring compatibility with the features necessary for Peer Copy between Primera and 3PAR arrays. Ensuring that this version is installed and correctly configured is essential for successful implementation.
These prerequisites help ensure that the high availability setup between the Primera and 3PAR arrays functions correctly and that the data protection mechanisms are reliable.
Reference: HPE RMC Overview
HPE 3PAR and Primera Compatibility
Question #167
Which technology provides a low-latency storage tier suitable for caching?
- A . SAS SSD
- B . Enterprise SAS 15K
- C . Persistent Memory
- D . NVMe flash storage
Correct Answer: D
Question #168
A Company using an existing 1GB ISCSI storage array is experiencing storage access performance issue. They are interested in deploying HPE 3PAR Storeserv with 16GB /S FC end to-end to improve the performance to the minimal changes to the environment.
The existing environment consists of these HPE products
* HPE C7000 Blade system platinum blade enclosure with HP virtual connect Flex 10 interconnect modules.
* Configuration of HPE Proliant Gen8 and Gen9 blade servers
* HPE 2920 Switches
Which HPE products must be included to support new HPE 3PAR Storeserv? (Select two)
- A . HPE B-Series 16GB SAN switch for HPE Blade system C-class series
- B . HPE 16GB/s Fibre channel HBA for Blade servers
- C . HP 5900CP switch series with 16GB/S SFP+ Modules
- D . HPE Flex fabric 20GB,2-Port 630 FLB adapter
- E . HPE Virtual connect Flex fabric 20/40 f8 modules
Correct Answer: A,B
A,B
Explanation:
To support the deployment of HPE 3PAR StoreServ with 16GB/s Fibre Channel (FC) in an existing environment that includes HPE BladeSystem with Virtual Connect Flex-10 and ProLiant Gen8/Gen9 servers, the appropriate products to include are:
HPE B-Series 16GB SAN switch: This switch is necessary to provide the high-speed 16GB/s FC connectivity between the BladeSystem and the 3PAR StoreServ array, ensuring that the performance issues are addressed with minimal changes to the environment.
HPE 16GB/s Fibre Channel HBA for Blade servers: The FC HBAs (Host Bus Adapters) are required for the blade servers to connect to the 16GB/s FC SAN, enabling end-to-end high-speed connectivity from the servers to the storage array.
Reference: HPE B-Series SAN Switches
HPE 3PAR StoreServ Integration with BladeSystem
A,B
Explanation:
To support the deployment of HPE 3PAR StoreServ with 16GB/s Fibre Channel (FC) in an existing environment that includes HPE BladeSystem with Virtual Connect Flex-10 and ProLiant Gen8/Gen9 servers, the appropriate products to include are:
HPE B-Series 16GB SAN switch: This switch is necessary to provide the high-speed 16GB/s FC connectivity between the BladeSystem and the 3PAR StoreServ array, ensuring that the performance issues are addressed with minimal changes to the environment.
HPE 16GB/s Fibre Channel HBA for Blade servers: The FC HBAs (Host Bus Adapters) are required for the blade servers to connect to the 16GB/s FC SAN, enabling end-to-end high-speed connectivity from the servers to the storage array.
Reference: HPE B-Series SAN Switches
HPE 3PAR StoreServ Integration with BladeSystem
Question #169
A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB
ERP database.
What would be a design approach to solve this issue?
- A . Perform controller upgrade to a Nimbel CS3000 storage systems
- B . Add additional SSd drives as cache to the system and PIN the volume
- C . Enable storage tiering on the system and map the volume to the new tier
- D . Change RAID of the drives to RAID -1and setup quality of services for the volume
Correct Answer: B
B
Explanation:
For resolving latency issues on a Nimble CS3000 storage system, particularly for a high-demand application like a 2TB ERP database, the best approach is to add additional SSD drives to the system as cache and PIN the volume. This ensures that the entire database or frequently accessed parts of it are always stored in the fastest storage tier (SSD), significantly reducing latency and improving overall performance for the ERP database.
Reference: HPE Nimble Storage
HPE Storage Performance Optimization
B
Explanation:
For resolving latency issues on a Nimble CS3000 storage system, particularly for a high-demand application like a 2TB ERP database, the best approach is to add additional SSD drives to the system as cache and PIN the volume. This ensures that the entire database or frequently accessed parts of it are always stored in the fastest storage tier (SSD), significantly reducing latency and improving overall performance for the ERP database.
Reference: HPE Nimble Storage
HPE Storage Performance Optimization
Question #170
Match the type of storage found in today’s market to the HPE storage solution optimized for that capacity?
- A . HPE 3PAR StoreServ – Block
- B . MSA – Block
- C . Nimble – Block
- D . Scalability – Object
- E . StoreEasy – File
- F . StoreVirtual – Block
Correct Answer: A