DELL EMC D-PE-OE-23 Practice Exams
Last updated on Oct 22,2026- Exam Code: D-PE-OE-23
- Exam Name: Dell Technologies PowerEdge Operate 2023
- Certification Provider: DELL EMC
- Latest update: Oct 22,2026
A technician is replacing a fan on a mission critical PowerEdge R740 server that needs to stay operational. The server has no LCD.
How can the technician determine which fan needs to be replaced?
- A . Run embedded diagnostics to locate the failing fan
- B . Access the Lifecycle Controller, navigate to the System > Cooling section to locate the failing fan number
- C . Remove the chassis cover and observe a fan with an amber LED
- D . Use the iDRAC GUI to locate failing fan number
A technician is replacing a fan on a mission critical PowerEdge R740 server that needs to stay operational. The server has no LCD.
How can the technician determine which fan needs to be replaced?
- A . Run embedded diagnostics to locate the failing fan
- B . Access the Lifecycle Controller, navigate to the System > Cooling section to locate the failing fan number
- C . Remove the chassis cover and observe a fan with an amber LED
- D . Use the iDRAC GUI to locate failing fan number
A technician configures iDRAC on a new server for access on the management network. When accessing via telnet, the connection is refused. Network connectivity is a verified network. NO ports are blocked by any network devices.
Why is the telnet connection being refused?
- A . Telnet is NOT enabled by default on the iDRAC
- B . The telnet client must be configured to connect to port 8899 on the iDRAC
- C . Telnet is NOT supported to access iDRAC.
- D . The iDRAC must be configured to allow the IP address of the technician’s workstation.
A technician configures iDRAC on a new server for access on the management network. When accessing via telnet, the connection is refused. Network connectivity is a verified network. NO ports are blocked by any network devices.
Why is the telnet connection being refused?
- A . Telnet is NOT enabled by default on the iDRAC
- B . The telnet client must be configured to connect to port 8899 on the iDRAC
- C . Telnet is NOT supported to access iDRAC.
- D . The iDRAC must be configured to allow the IP address of the technician’s workstation.
A system administrator needs to install OpenManage Server Administrator on 200 servers.
What is the quickest way to meet this requirement?
- A . Use the Lifecycle Controller to install OpenManage Server Administrator on each server.
- B . Install OME and push OpenManage Server Administrator to all 200 servers.
- C . Use Microsoft utilities to automate the deployment of OpenManage Server Administrator.
- D . Download OpenManage Server Administrator from Dell.com and install on each server.
A system administrator, while working with tech support, is asked to check the blinking LEDs on the Dell PowerEdge 16G server.
Where should the administrator look?
- A . On the right control panel
- B . On the system board
- C . On the left control panel
- D . On the front LCD panel
One of the servers in a datacenter is set to use the 1+1 power redundancy option with a hot spare. The server uses 1100W PSUs. An SNMP trap has been sent alerting the technician to a PSU failure.
Since this is the "hot spare" PSU, the technician chooses an available, higher capacity Titanium PSU. After replacing the PSU and connecting the power cable, the PSU indicator/handle flashes green, then turns off.
The technician has taken the following actions:
– Reseated the PSU
– Checked the firmware version
– Checked the cable connections
The PSU continues to flash green then turn off.
What should the technician do?
- A . Check the Titanium PSU in another server to ensure it is not defective
- B . Wait for the PSU firmware to update
- C . Replace the 1100W PSU with a matching unit
- D . Change the redundancy from 1+1 to 2+0 and then enable the hot spare
A user has a fully configured PowerEdge R640 and an iSM installed on their Windows. 2016 operating system. They now want to install OMSA to enable them to have alerts sent out In-Band to a management console.
What does the user need to consider?
- A . OMSA can be installed on the same operating system with ISM. Provided both OMSA have iSM have the same firmware version revisions
- B . iSM must be uninstalled before OMSA is installed
- C . iSM must be disabled before OMSA can be installed
- D . OMSA can be installed on the same operating system with iSM without restrictions
A server needs to be configured with a six disk RAID 10 using 3 TB drives.
What should be the available array size in this configuration?
- A . 4TB
- B . 6TB
- C . 9TB
- D . 12TB
What is the result when iDRAC is in Lockdown Mode?
- A . iDRAC is only accessible to administrators.
- B . The virtual console is not accessible.
- C . Local iDRAC users have read-only access.
- D . Lifecycle Controller is inaccessible.