DELL EMC D-PE-OE-23 Practice Exams
Last updated on Oct 22,2026- Exam Code: D-PE-OE-23
- Exam Name: Dell Technologies PowerEdge Operate 2023
- Certification Provider: DELL EMC
- Latest update: Oct 22,2026
What type of screwdriver is required to remove the processor heat sink module?
- A . Torx
- B . Hex
- C . Phillips
- D . Torque
Which component of the Dell EMC PowerEdge server provides system information, status, and error messages to indicate when the system is operating correctly, or when the system needs attention?
- A . RACADM
- B . Front Panel LCD
- C . BIOS
- D . UEFI
A technician is setting up SNMP Trap Alerts on a 14G servers.
After specifying the trap destination address, what should be the next step?
- A . Enable the SMNP Client service on the iDRAC
- B . Include the server OS IP address in the destination systems authentication script
- C . Enable the SMNP services in the server operating system of the sending server
- D . Send an SNMP trap test to the destination system
A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?
- A . System Profile
- B . Virtualization Technology
- C . HyperThreading
- D . Number of Cores per Processor
What can a technician do to ensure that no malicious code can be introduced into any of the servers through physical access?
- A . Set USB 3.0 to disabled
- B . Set Secure Boot Policy to enabled
- C . Set User Accessible Ports to disabled
- D . Set UEFI Variable Acces to disabled
A technician creates two virtual disks, Vdisk1 and Vdisk2, and assigns a dedicated hot spare for Vdisk1. A drive fails on Vdisk2.
What is the result?
- A . Rebuild operation occurs in Vdisk2.
- B . Dedicated hot spare replaces the failed disk.
- C . Vdisk2 loses one remaining redundancy.
- D . RLM runs for the failed disk.
A technician is updating firmware on a Windows Server using the Lifecycle Controller following a NIC replacement, but it fails to complete the update on the NIC despite successfully updating other components.
The update’s read me confirms that the current version is too old to upgrade with the Lifecycle Controller and an alternative method must be used.
Which three update methods could the technician use to meet this requirement? (Choose three.)
- A . Use Update and Rollback within the iDRAC web GUI
- B . Launch Server Update Utility (SUU) from the OS
- C . Run a Dell Update Package (DUP) from the OS
- D . Create a bootable ISO file with Repository Manager
- E . Launch Platform Update from OpenManage Server Administrator
What type of fans are installed in servers with NVMe storage and GPU configurations?
- A . STD
- B . HPR
- C . LFM
- D . VHP
Which attribute is unique to the Lifecycle log?
- A . Message ID
- B . Severity indicator
- C . System event is recorded
- D . Date and timestamp
A
Explanation:
Understanding the Unique Attribute of the Lifecycle Log
Server Troubleshooting (32%)
Explain the server logs and memory error
What is the Lifecycle Log?
The Lifecycle Log in Dell PowerEdge servers is a comprehensive log that records system events related to hardware configuration changes, firmware updates, errors, and other critical information.
It is maintained by the Integrated Dell Remote Access Controller (iDRAC) and provides valuable data for troubleshooting and auditing.
Unique Attribute of the Lifecycle Log
Message ID:
Each entry in the Lifecycle Log is assigned a unique Message ID.
The Message ID is a specific code that identifies the type of event or error.
These codes are standardized and can be cross-referenced with Dell’s documentation to understand the exact nature of the event.
Uniqueness:
While other logs may include timestamps, severity indicators, and event descriptions, the use of standardized Message IDs is unique to the Lifecycle Log.
This attribute allows for precise identification and correlation of events across systems.
Explanation of Options
Option A: Message ID
Analysis:
The Message ID is unique to the Lifecycle Log, providing specific identifiers for events.
Conclusion: Correct Answer.
Option B: Severity indicator
Analysis:
Severity indicators (e.g., informational, warning, critical) are common in various system logs.
Not unique to the Lifecycle Log.
Conclusion: Incorrect.
Option C: System event is recorded
Analysis:
Recording system events is a fundamental function of all logs.
Not an attribute unique to the Lifecycle Log.
Conclusion: Incorrect.
Option D: Date and timestamp
Analysis:
Date and timestamp entries are standard in virtually all logs to indicate when events occurred.
Not unique to the Lifecycle Log.
Conclusion: Incorrect.
Dell Operate Reference
Server Troubleshooting (32%)
Explain the server logs and memory error:
Understanding the structure and attributes of the Lifecycle Log is essential for effective troubleshooting.
Recognizing the importance of Message IDs aids in diagnosing and resolving issues quickly.
Server Management and Configuration Tools (14%)
Explain the management interface options – LCC, racadm, OMSA, iSM, OME:
The Lifecycle Controller (LCC) and iDRAC provide access to the Lifecycle Log and its detailed entries.
Conclusion
The Message ID is the attribute unique to the Lifecycle Log. It allows administrators to identify and interpret specific events accurately, facilitating efficient troubleshooting and system management.
A technician has replaced a network daughter card (NDC) with a different, supported NDC.
Using the Lifecycle Controller, what can they do to verify that the new NDC is present?
- A . Verify Hardware Inventory License has been imported
Verify Current Inventory form Hardware Inventory - B . View Current Inventory from Hardware Inventory
Verify Collect System Inventory on Restart Option (CSIOR) is enabled - C . View System Information from System Setup > Advanced Hardware Configuration > System BIOS
Select Configure NDC in Device Settings - D . View Factory Shipped Inventory from Hardware Inventory
Select Import NDC MIB