DELL EMC D-PCM-DY-23 Practice Exams
Last updated on Nov 16,2026- Exam Code: D-PCM-DY-23
- Exam Name: Dell PowerSwitch Campus Deploy 2023
- Certification Provider: DELL EMC
- Latest update: Nov 16,2026
When using static routes, the ip route 192.168.1.0/24 10.8.3.2 command is issued.
What does the address 10.8.3.2 specify?
- A . Next hop IP address
- B . Destination address
- C . Source address
- D . Null0
Refer to the Exhibit.

Switch-1(config)# radius server host 10.1.1.111
Switch-1(config-radius)# key "secretkey"
Switch-1(config-radius)# exit
Switch-1(config)# aaa authentication login "LOCAL-AUTH" local
Switch-1(config)# aaa authentication login "REMOTE-AUTH" radius local
Switch-1(config)# aaa authentication enable "REMOTE-AUTH" radius enable
Switch-1(config)# aaa authentication login default tacacs local
Switch-1(config)# aaa authentication enable default tacacs enable
Switch-1(config)# line telnet Switch-1(config-telnet)# login authentication "REMOTE-AUTH"
Switch-1(config-telnet)# exit Switch-1(config)# line ssh
Switch-1(config-ssh)# login authentication default
Switch-1(config)# exit Switch-1(config)# line console
Switch-1(config-line)# login authentication "LOCAL-AUTH"
Switch-1(config-line)# exit
Which authentication method will be used if a user tries to login to the switch when accessing through SSH?
- A . RADIUS, then fails over to a local user account
- B . Local user account
- C . TACACS, then fails over to a local user account
- D . None
Which Dell OS6 command displays the IPv6 address of the default gateway and the default route associated with the gateway?
- A . show ip route
- B . show ipv6 route
- C . show ip mroute
- D . show ipv6 brief
You have been tasked with troubleshooting a LAG issue between two Dell EMC N-Series switches. The N3024-2 switch is configured correctly.

Based on the graphic, what is incorrect with the N3024-1 configuration?
- A . N3024-1 is configured as a static port-channel
- B . N3024-1 ports Gi1/0/7 and Gi1/0/8 are configured as voice ports
- C . N3024-1 is configured as an LACP port-channel
- D . N3024-1 ports Gi1/0/7 and Gi1/0/8 are configured as trunk ports
Which OSPF packet type is sent to the neighbor when LSDB difference is detected?
- A . Hello
- B . LSR
- C . LSAck
- D . LSU
What is the maximum power that a Class 4 PoE device can consume?
- A . 30 watts
- B . 60 watts
- C . 25.5 watts
- D . 15.4 watts
Which configuration tool will allow a network administrator to override routing protocol decisions and determine the forwarding of packets?
- A . SVI
- B . SMTP
- C . RSTP
- D . PBR
What is the purpose of VRRP Authentication?
- A . Ensures that only trusted TCP packets are routed
- B . Ensures that the trusted VRRP router is the Master and untrusted VRRP routers are backup routers
- C . Ensures administrators are able to log into VRRP
- D . Ensures that only VRRP trusted routers participate in the VRRP process
The switch interface used for the connection to an FTP server is configured with an IP ACL to allow access to the server using only TCP port 20. However, users are still unable to transfer files from the server.
What is preventing the TCP file transfers from working?
- A . Switch should use a MAC ACL rather than an IP ACL
- B . IP ACL must specify the source subnets that can access the file server
- C . IP ACL must use UDP port 20
- D . IP ACL must also allow TCP port 21

