DELL EMC D-PCM-DY-23 Practice Exams
Last updated on Nov 16,2026- Exam Code: D-PCM-DY-23
- Exam Name: Dell PowerSwitch Campus Deploy 2023
- Certification Provider: DELL EMC
- Latest update: Nov 16,2026
When setting up VoIP, you decide that you want to use LLDP. LLDP is enabled by default and LLDP Transmit Management Information and Notification modes are enabled.
What additional steps need to be performed?
- A . Enable ISDP and enable LLDP-MED confignotification
- B . Disable ISDP and enable LLDP-MED confignotification
- C . Enable ISDP and disable LLDP-MED confignotification
- D . Disable ISDP and disable LLDP-MED confignotification
When using LLDP for configuration communication, what additional protocol features should be enabled to allow the switch to share all VoIP related parameters?
- A . lldp notification, lldp transmit-mgmt, and lldp transmit-tlv sys-cap
- B . lldp med confignotification, lldp transmit-tlv sys-cap, and lldp transmit-mgmt
- C . lldp transmit-tlv sys-cap, lldp med confignotification, and lldp notification
- D . lldp transmit-mgmt, lldp notification, and lldp med confignotification
A network administrator wants different applications’ traffic to take different network paths.
Which information can the administrator use to create a match to differentiate the application traffic when using policy-based routing?
- A . Physical port number
- B . Destination IP address
- C . Application TCP port number
- D . Source IP address
A network administrator has created an ACL to block broadcast traffic to their server on port Gi1/0/1.

Why is the ACL not functioning as desired?
- A . ACL is not applied in the correct direction
- B . ACLs do not support broadcast traffic
- C . Destination address mask is incorrect
- D . Destination IP address is incorrect
Which is a valid link-local IPv6 address?
- A . 2001:db8:21aa:7:7130:a400:d167:92ab
- B . fe80::b8b2:6397::3cfc
- C . 2001:dd71::5ece:7:6935:b407
- D . fe80::b0d3:3911:55e2:cfc
A Dell EMC N-Series switch is configured with switchport mode access and ingress filtering.
What is the purpose of ingress filtering?
- A . Allow the port to transmit only untagged frames in the configured VLAN
- B . Allow the port to accept both tagged and untagged frames in the configured VLAN
- C . Allow the port to transmit both tagged and untagged frames in the configured VLAN
- D . Allow the port to accept only untagged frames in the configured VLAN
Refer to the Graphic.

A network administrator has created a MAC ACL to allow Hosts A and B to reach the server but not each other. However, the list is not functioning as expected.
Which ACL configuration should be used for it to function as desired?
- A . Configuration A:
Permit 01DA.CE12.EBD4 0000.0000.0000 01DA.CE12.EBD4 0000.00ff.ffff Deny 01DA.CE12.EBD4 0000.0000.0000 01DA.CE3E.4103 0000.0000.0000 Deny 01DA.CE3E.4103 0000.0000.0000 01DA.CE12.EBD4 0000.0000.0000 Permit 01DA.CE3E.4103 0000.0000.0000 01DA.CE12.EBD4 0000.00ff.ffff Permit 01DA.CE3E.4103 0000.00ff.ffff 010B.12CA.6CE0 0000.0000.0000 - B . Configuration B:
Network administrator is configuring a sw103 0000.0000.0000 Permit 01DA.CE3E.4103 0000.0000.0000 01DA.CE12.EBD4 0000.00ff.ffff Deny 01DA.CE3E.4103 0000.0000.0000 01DA.CE12.EBD4 0000.0000.0000 permit 01DA.CE12.EBD4 0000.0000.0000 01DA.CE12.EBD4 0000.00ff.ffff Permit 01DA.CE3E.4103 0000.00ff.ffff 010B.12CA.6CE0 0000.0000.0000 - C . Configuration C:
Permit 01DA.CE12.EBD4 0000.0000.0000 01DA.CE12.EBD4 0000.00ff.ffff Permit 01DA.CE3E.4103 0000.0000.0000 01DA.CE12.EBD4 0000.00ff.ffff Deny 01DA.CE3E.4103 0000.0000.0000 01DA.CE12.EBD4 0000.0000.0000 Deny 01DA.CE12.EBD4 0000.0000.0000 01DA.CE3E.4103 0000.0000.0000 Permit 01DA.CE3E.4103 0000.00ff.ffff 010B.12CA.6CE0 0000.0000.0000 - D . Configuration D:
Deny 01DA.CE3E.4103 0000.0000.0000 01DA.CE12.EBD4 0000.0000.0000 Deny 01DA.CE12.EBD4 0000.0000.0000 01DA.CE3E.4103 0000.0000.0000 Permit 01DA.CE12.EBD4 0000.0000.0000 01DA.CE12.EBD4 0000.00ff.ffff Permit 01DA.CE3E.4103 0000.0000.0000 01DA.CE12.EBD4 0000.00ff.ffff Permit 01DA.CE3E.4103 0000.00ff.ffff 010B.12CA.6CE0 0000.0000.0000
N4032F#show interfaces status

N4032F#show interfaces port-channel 1
![]()
Hash Algorithm Type
– Source MAC, VLAN, EtherType, source module and port Id
– Destination MAC, VLAN, EtherType, source module and port Id
– Source IP and source TCP/UDP port
– Destination IP and destination TCP/UDP port
– Source/Destination MAC, VLAN, EtherType, source MODID/port
– Source/Destination IP and source/destination TCP/UDP port
– Enhanced hashing mode
N4032F#
A Dell EMC N-Series switch has been configured with a 2-member port-channel; however, only one link is currently active.
Based on the exhibit, why is only one link active?
- A . Minimum links value for Po1 is set to "1"
- B . Hash algorithm is configured for active-passive
- C . Te1/0/6 interface is administratively disabled
- D . Speed setting is different between ports
What is the Administrative Distance of static routes on a Dell PowerSwitch N-Series switch?
- A . 0
- B . 20
- C . 1
- D . 10
What is the maximum N1100 and N1500 switches that can be stacked?
- A . 8
- B . 4
- C . 12
- D . 6