DELL EMC D-PCM-DY-23 Practice Exams
Last updated on Nov 16,2026- Exam Code: D-PCM-DY-23
- Exam Name: Dell PowerSwitch Campus Deploy 2023
- Certification Provider: DELL EMC
- Latest update: Nov 16,2026
Which commands should a network administrator use to configure a RADIUS server on a Dell EMC N-Series switch?
- A . Switch-1(config)# radius 10.1.1.111
Switch-1(config-radius)# name RADIUS-Server
Switch-1(config-radius)# key secretkey - B . Switch-1(config)# radius server auth 10.1.1.111
Switch-l(config-radius)# name
RADIUS-Server
Switch-1(config-radius)# key "secretkey" - C . Switch-1(config)# radius auth 10.1.1.111
Switch-1(config-radius)# name "RADIUS-
Server" Switch-1(config-radius)# key "secretKey" - D . Switch-1(config)# radius auth server 10.1.1.111
Switch-1(config-radius)# name
RADIUS-Server
Switch-1(config-radius)# key "secretKey"
When configuring a Dell EMC N-Series switch for voice traffic, which settings are needed?
- A . Enable voice VLAN Set each-interface to LLDP share all VoIP related parameters Set switchport mode to general
- B . Create a VLAN for voice Set each interface to ISDP share all VoIP related parameters Set switchport mode to general
- C . Enable voice VLAN Set each interface to LLDP share all VoIP related parameters Set switchport mode to hybrid
- D . Enable voice VLAN Set each interface to ISDP share all VoIP related parameters Set switchport mode to general
A Dell EMC N-Series switch is configured to uplink to a customer switch using two separate 4-port port-channels configured as trunks. Both switches are configured with 16 VLANs and RSTP.
How will VLAN traffic be distributed across the port-channels?
- A . All VLANs are allowed across a single port-channel
- B . A single VLAN is allowed across each port-channel
- C . All VLANs are allowed across both port-channels
- D . Eight VLANs are allowed across each port-channel
A network administrator is setting up several stacks in their network that includes different Dell EMC N-Series models.
Which N-Series switch models require mini-SAS stacking cables?
- A . N1100 and N1500
- B . N1500 and N3000
- C . N2000 and N3000
- D . N3000 and N4000
Which L3 feature overrides routing protocol decisions and determines the forwarding of packets?
- A . SVI
- B . PBR
- C . RSTP
- D . SMTP
What are key features of the Dell EMC N4064 or N4064F switches?
- A . Up to 640 Gbps switch fabric capacity and hot swap expansion module support for dual QSFP+ (8 x 10GbE)
- B . Up to 1.0 Tbps switch fabric capacity and up to 48-line rate 10GbE ports per switch
- C . Up to 1.2 Tbps switch fabric capacity and up to 64-line rate 10GbE ports per switch
- D . Up to 48-line rate 10GbE ports per switch and hot swap expansion module support for dual QSFP+ (8 x 10GbE)
When DSCP is used for QoS prioritization, which type of service is typically used for voice traffic?
- A . 26
- B . 28
- C . 46
- D . 52
How does the weighted Queue Scheduler prioritize packets?
- A . Scheduler prioritizes weighted queues over any strict queues
- B . Weights are calculated based on the number of packets
- C . Weights are used to calculate the number of bytes
- D . Weight is assigned to each port
A group of four switches are configured to be part of a VRRP group with the following configurations:
– Switch1: IP 192.168.10.11, Priority 11
– Switch2: IP 192.168.10.12, Priority 12
– Switch3: IP 192.168.10.13, Priority 13
– Switch4: IP 192.168.10.14, Priority 14
The switches are initially disconnected from the network and come online in the following order: Switch3, Switch2, Switch4, Switch1.
If preempt is disabled, which switch is expected to be the Primary?
- A . Switch2
- B . Switch1
- C . Switch4
- D . Switch3
How many untagged VLANs are allowed on a switchport mode trunk interface?
- A . 0
- B . 1
- C . 128
- D . 4096