DELL EMC D-OME-OE-A-24 Practice Exams
Last updated on Oct 21,2026- Exam Code: D-OME-OE-A-24
- Exam Name: Dell OpenManage Operate Achievement
- Certification Provider: DELL EMC
- Latest update: Oct 21,2026
Question #1
An OpenManage Enterprise administrator would like to replace the current, untrusted certificate with a trusted certificate. They do not yet have a certificate available so it must be obtained.
What first steps are required to achieve their goal?
- A . Go to Configuration > Security > Certificates
Click the Upload button to upload the purchased certificate - B . Go to Application Settings > Security > Certificates
Click the Upload button to upload the purchased certificate - C . Go to Application Settings > Security > Certificates Click the Generate Certificate Signing Request button
- D . Go to Configuration > Security > Certificates
Click the Generate Certificate Signing Request button
Correct Answer: C
C
Explanation:
To replace an untrusted certificate with a trusted one in OpenManage Enterprise, the administrator must first generate a Certificate Signing Request (CSR). This is the initial step required to obtain a certificate from a Certificate Authority (CA). Here are the steps to generate a CSR:
Navigate to Application Settings: Access the OpenManage Enterprise web interface and go to the Application Settings.
Go to Security: Within the Application Settings, find and select the Security section.
Access Certificates: Look for the Certificates option under the Security settings.
Generate CSR: Click on the ‘Generate Certificate Signing Request’ button to create a new CSR.
Fill out CSR Details: Provide the necessary information for the CSR, including the name of the appliance and other relevant details.
Submit CSR to CA: Once the CSR is generated, it needs to be submitted to a CA for signing. The CA will then provide a trusted certificate based on the CSR.
The process of generating a CSR and managing custom certificates in OpenManage Enterprise is detailed in the Dell Support Knowledge Base1. After obtaining the signed certificate from the CA, the administrator can then upload it to OpenManage Enterprise to replace the current untrusted certificate.
C
Explanation:
To replace an untrusted certificate with a trusted one in OpenManage Enterprise, the administrator must first generate a Certificate Signing Request (CSR). This is the initial step required to obtain a certificate from a Certificate Authority (CA). Here are the steps to generate a CSR:
Navigate to Application Settings: Access the OpenManage Enterprise web interface and go to the Application Settings.
Go to Security: Within the Application Settings, find and select the Security section.
Access Certificates: Look for the Certificates option under the Security settings.
Generate CSR: Click on the ‘Generate Certificate Signing Request’ button to create a new CSR.
Fill out CSR Details: Provide the necessary information for the CSR, including the name of the appliance and other relevant details.
Submit CSR to CA: Once the CSR is generated, it needs to be submitted to a CA for signing. The CA will then provide a trusted certificate based on the CSR.
The process of generating a CSR and managing custom certificates in OpenManage Enterprise is detailed in the Dell Support Knowledge Base1. After obtaining the signed certificate from the CA, the administrator can then upload it to OpenManage Enterprise to replace the current untrusted certificate.
Question #2
A Device Manager user of OpenManage Enterprise is trying to modify a discovery task originally created by another user. The edit button is grayed out.
What is a consideration when attempting to modify this discovery task?
- A . Only the item author can modify an existing discovery task.
- B . The task must be deleted, then re-created.
- C . It is not possible to modify an existing discovery task.
- D . Only an Administrator can edit an existing discovery task.
Correct Answer: D
D
Explanation:
In OpenManage Enterprise, the ability to modify a discovery task is typically restricted based on user roles and permissions. If a Device Manager user finds the edit button for a discovery task grayed out, it indicates that they do not have the necessary permissions to make changes to that task.
Here’s a detailed explanation:
User Roles: OpenManage Enterprise has different user roles with varying levels of permissions. The Device Manager role may have limited permissions that do not include editing discovery tasks created by others1.
Administrative Privileges: Generally, administrative privileges are required to edit tasks created by other users. This ensures that only authorized personnel can make changes to critical system configurations2.
Task Ownership: The original creator of a task or an administrator would typically have the rights to modify it. If the task was created by another user, a Device Manager would not be able to edit it unless they have been granted additional permissions2.
In this scenario, the consideration is that only an Administrator, who has higher privileges, can edit an existing discovery task. This is designed to maintain system integrity and prevent unauthorized changes. If a Device Manager needs to modify a task, they would need to request an Administrator to make the changes or be granted the appropriate permissions to do so.
D
Explanation:
In OpenManage Enterprise, the ability to modify a discovery task is typically restricted based on user roles and permissions. If a Device Manager user finds the edit button for a discovery task grayed out, it indicates that they do not have the necessary permissions to make changes to that task.
Here’s a detailed explanation:
User Roles: OpenManage Enterprise has different user roles with varying levels of permissions. The Device Manager role may have limited permissions that do not include editing discovery tasks created by others1.
Administrative Privileges: Generally, administrative privileges are required to edit tasks created by other users. This ensures that only authorized personnel can make changes to critical system configurations2.
Task Ownership: The original creator of a task or an administrator would typically have the rights to modify it. If the task was created by another user, a Device Manager would not be able to edit it unless they have been granted additional permissions2.
In this scenario, the consideration is that only an Administrator, who has higher privileges, can edit an existing discovery task. This is designed to maintain system integrity and prevent unauthorized changes. If a Device Manager needs to modify a task, they would need to request an Administrator to make the changes or be granted the appropriate permissions to do so.
Question #3
A Hyper-V deployment of OpenManage Enterprise is currently managing 2,000 devices. Users are complaining about poor performance from the UI.
What is a troubleshooting step to consider?
- A . Increase the size of the paging file for the host operating system
- B . Ensure that a minimum of eight virtual processors are allocated
- C . Ensure that a minimum of 16 GB of memory is allocated
- D . Select the Enable Dynamic Memory option
Correct Answer: B
B
Explanation:
For a Hyper-V deployment of OpenManage Enterprise managing a large number of devices, ensuring adequate resources is crucial for optimal performance. One troubleshooting step to consider is to ensure that a minimum of eight virtual processors are allocated to the OpenManage Enterprise virtual appliance.
Here’s why this is important:
Virtual Processors: The number of virtual processors (vCPUs) assigned to a virtual machine (VM) directly affects its ability to handle concurrent tasks. OpenManage Enterprise, when managing thousands of devices, requires sufficient processing power to maintain smooth operation of the UI and backend processes.
Performance: If users are experiencing poor performance, it could be due to the VM not having enough vCPUs to efficiently process the workload. Allocating at least eight vCPUs can provide the necessary computational power to improve UI responsiveness and overall system performance1.
It’s also recommended to review the overall resource allocation, including memory and storage, to ensure they meet the requirements for the scale of the deployment. For detailed specifications and performance optimization tips, refer to the official Dell OpenManage Enterprise support resources1.
B
Explanation:
For a Hyper-V deployment of OpenManage Enterprise managing a large number of devices, ensuring adequate resources is crucial for optimal performance. One troubleshooting step to consider is to ensure that a minimum of eight virtual processors are allocated to the OpenManage Enterprise virtual appliance.
Here’s why this is important:
Virtual Processors: The number of virtual processors (vCPUs) assigned to a virtual machine (VM) directly affects its ability to handle concurrent tasks. OpenManage Enterprise, when managing thousands of devices, requires sufficient processing power to maintain smooth operation of the UI and backend processes.
Performance: If users are experiencing poor performance, it could be due to the VM not having enough vCPUs to efficiently process the workload. Allocating at least eight vCPUs can provide the necessary computational power to improve UI responsiveness and overall system performance1.
It’s also recommended to review the overall resource allocation, including memory and storage, to ensure they meet the requirements for the scale of the deployment. For detailed specifications and performance optimization tips, refer to the official Dell OpenManage Enterprise support resources1.
Question #4
A newly discovered server is added into an existing custom group. All servers in this group are assigned to a Compliance Baseline CB1. The baseline compliance for CB1 shows all previously
deployed servers as Compliant. The new server status shows as Compliance Incomplete.
How can this be fixed?
- A . Run a Configuration Inventory task on the new server
- B . Remove and re-add the server to the custom group
- C . Run a Discovery task on the new server
- D . Run an Onboarding task on the new server
Correct Answer: A
A
Explanation:
When a new server is added to a custom group and assigned to a Compliance Baseline CB1, but shows as “Compliance Incomplete,” it indicates that the server’s current configuration has not been fully inventoried or compared against the baseline. To resolve this, a Configuration Inventory task should be run on the new server. This task will gather the current configuration details of the server and compare them with the compliance baseline to determine if there are any discrepancies.
Here are the steps to fix the issue:
Select the New Server: In OpenManage Enterprise, navigate to the server list and select the newly added server.
Run Configuration Inventory: Go to the server’s actions or context menu and select the option to run a Configuration Inventory task.
Wait for Completion: Allow the task to complete. It will collect configuration data from the server.
Check Compliance Status: After the inventory task is complete, check the compliance status again.
The server should now reflect the correct compliance status based on the baseline CB1.
Running a Configuration Inventory task ensures that all configuration settings of the server are accounted for and compared against the defined compliance baseline. This process is essential for maintaining the integrity of server configurations and ensuring that all servers adhere to the organization’s standards1.
For more detailed procedures and best practices, refer to the Dell OpenManage Enterprise documentation and support resources12.
A
Explanation:
When a new server is added to a custom group and assigned to a Compliance Baseline CB1, but shows as “Compliance Incomplete,” it indicates that the server’s current configuration has not been fully inventoried or compared against the baseline. To resolve this, a Configuration Inventory task should be run on the new server. This task will gather the current configuration details of the server and compare them with the compliance baseline to determine if there are any discrepancies.
Here are the steps to fix the issue:
Select the New Server: In OpenManage Enterprise, navigate to the server list and select the newly added server.
Run Configuration Inventory: Go to the server’s actions or context menu and select the option to run a Configuration Inventory task.
Wait for Completion: Allow the task to complete. It will collect configuration data from the server.
Check Compliance Status: After the inventory task is complete, check the compliance status again.
The server should now reflect the correct compliance status based on the baseline CB1.
Running a Configuration Inventory task ensures that all configuration settings of the server are accounted for and compared against the defined compliance baseline. This process is essential for maintaining the integrity of server configurations and ensuring that all servers adhere to the organization’s standards1.
For more detailed procedures and best practices, refer to the Dell OpenManage Enterprise documentation and support resources12.
Question #5
After onboarding a device, what are the recommended actions to apply a VLAN template with OpenManage Enterprise?
- A . Create IOA template Configure VLAN settings Deploy Template on IOA
- B . Create VLAN template
Configure VLAN settings
Deploy Template on Modular Server - C . Create server template Configure VLAN settings
Deploy Template on Modular Server - D . Create server template Configure VLAN settings Deploy Template on IOA
Correct Answer: B
B
Explanation:
Create VLAN Template: The first step is to create a VLAN template within OpenManage Enterprise. This involves defining the VLAN ID and any associated settings such as name, description, and VLAN type.
Configure VLAN Settings: Once the template is created, you need to configure the VLAN settings according to your network design. This may include setting up access or trunk modes, allowed VLANs on trunks, and other relevant settings.
B
Explanation:
Create VLAN Template: The first step is to create a VLAN template within OpenManage Enterprise. This involves defining the VLAN ID and any associated settings such as name, description, and VLAN type.
Configure VLAN Settings: Once the template is created, you need to configure the VLAN settings according to your network design. This may include setting up access or trunk modes, allowed VLANs on trunks, and other relevant settings.
Deploy Template on Modular Server: The final step is to deploy the VLAN template on the modular server. This action applies the VLAN configuration to the server interfaces, ensuring that the server can communicate on the specified VLANs.
The process of applying a VLAN template is documented in the OpenManage Enterprise Modular API guide1, which provides detailed instructions on how to apply VLANs to a template. Additionally, Dell’s support videos and documentation offer guidance on creating and deploying server templates in OpenManage Enterprise2.
Question #6
In OpenManage Enterprise what is the maximum number of conditions or queries that can be entered into a single query group?
- A . 4
- B . 32
- C . 16
- D . 8
Correct Answer: B
B
Explanation:
In Dell OpenManage Enterprise, a single query group can contain a maximum of 32 conditions or queries. This allows for the creation of detailed and specific criteria for managing and monitoring systems within the application.
The process for creating a query group in OpenManage Enterprise typically involves:
Navigating to the query section within the OpenManage Enterprise console.
Initiating the creation of a new query group.
Adding conditions or queries to the group, with the option to specify up to 32 different criteria.
Saving the query group for later use in reports, alerts, or system monitoring tasks.
This information is consistent with the latest documentation and user guides provided by Dell for OpenManage Enterprise, ensuring that the answer is verified and up-to-date1. It’s important to refer to the most recent OpenManage Enterprise documentation or contact Dell support for the latest features and limitations.
B
Explanation:
In Dell OpenManage Enterprise, a single query group can contain a maximum of 32 conditions or queries. This allows for the creation of detailed and specific criteria for managing and monitoring systems within the application.
The process for creating a query group in OpenManage Enterprise typically involves:
Navigating to the query section within the OpenManage Enterprise console.
Initiating the creation of a new query group.
Adding conditions or queries to the group, with the option to specify up to 32 different criteria.
Saving the query group for later use in reports, alerts, or system monitoring tasks.
This information is consistent with the latest documentation and user guides provided by Dell for OpenManage Enterprise, ensuring that the answer is verified and up-to-date1. It’s important to refer to the most recent OpenManage Enterprise documentation or contact Dell support for the latest features and limitations.
Question #7
The storage administrator requires the WWPN for 10 servers that have not yet been deployed. The servers are in transit. Company policy is to use Virtual Identities on the SAN in case a server must be replaced.
How can this requirement be met?
- A . Manually create a WWPN and assign it to the servers when they are received.
- B . The servers must be deployed before providing this information.
- C . Create a profile in advance for each server and assign it once the server is discovered.
- D . Contact the Dell sales advisor and get the WWPN details from the factory build information.
Correct Answer: C
C
Explanation:
To meet the storage administrator’s requirement for the WWPN (World Wide Port Name) for servers that are in transit, the best approach is to create a profile in advance for each server and assign it once the server is discovered. This method aligns with the use of Virtual Identities on the SAN, which allows for flexibility in case a server needs to be replaced.
Here’s how this can be accomplished:
Create Virtual Identity Profiles: Before the servers arrive, create a Virtual Identity profile for each server within the management software that handles SAN configurations.
Assign WWPNs: Within each profile, assign a unique WWPN that will be used by the server’s Fibre Channel ports when connecting to the SAN.
Deploy Servers: Once the servers are deployed and discovered by the management system, the pre-created profiles can be assigned to them.
Activate Profiles: Activating the profiles will apply the Virtual Identities, including the WWPNs, to the servers, allowing them to be identified on the SAN.
This proactive approach ensures that the WWPNs are ready to be used as soon as the servers are online, facilitating a smooth integration into the SAN environment. It also adheres to company policy regarding the use of Virtual Identities, providing a seamless process for replacing servers if necessary1.
For more information on managing WWPNs and Virtual Identities in a SAN environment, administrators can refer to documentation and best practices provided by the SAN management software vendors1.
C
Explanation:
To meet the storage administrator’s requirement for the WWPN (World Wide Port Name) for servers that are in transit, the best approach is to create a profile in advance for each server and assign it once the server is discovered. This method aligns with the use of Virtual Identities on the SAN, which allows for flexibility in case a server needs to be replaced.
Here’s how this can be accomplished:
Create Virtual Identity Profiles: Before the servers arrive, create a Virtual Identity profile for each server within the management software that handles SAN configurations.
Assign WWPNs: Within each profile, assign a unique WWPN that will be used by the server’s Fibre Channel ports when connecting to the SAN.
Deploy Servers: Once the servers are deployed and discovered by the management system, the pre-created profiles can be assigned to them.
Activate Profiles: Activating the profiles will apply the Virtual Identities, including the WWPNs, to the servers, allowing them to be identified on the SAN.
This proactive approach ensures that the WWPNs are ready to be used as soon as the servers are online, facilitating a smooth integration into the SAN environment. It also adheres to company policy regarding the use of Virtual Identities, providing a seamless process for replacing servers if necessary1.
For more information on managing WWPNs and Virtual Identities in a SAN environment, administrators can refer to documentation and best practices provided by the SAN management software vendors1.
Question #8
Refer to the exhibit
An administrator is trying to create server profiles for 10 new PowerEdge servers. The servers have not been added to OpenManage Enterprise.
Based on the error, how can they successfully create the profiles?
- A . Edit the network settings Increase the pool size
- B . Run a discovery on the servers
- C . Run an Inventory on the servers
- D . Edit the Identity pool Increase the number of Virtual Identities
Correct Answer: D
D
Explanation:
The error message indicates that there are not enough Ethernet MAC Identities available for assignment to the template. This suggests that the Identity pool does not have a sufficient number of Virtual Identities to accommodate the creation of server profiles for the new PowerEdge servers. To successfully create the profiles, the administrator needs to increase the number of Virtual Identities in the Identity pool.
Here’s how to do it:
Access OpenManage Enterprise: Log into the OpenManage Enterprise console.
Navigate to Identity Pool: Go to the section where the Identity pools are managed.
Edit the Identity Pool: Select the Identity pool that is being used for the server profiles.
Increase Virtual Identities: Increase the number of Virtual Identities within the pool to ensure there are enough available for all the new servers.
Save Changes: Save the changes to the Identity pool.
Retry Profile Creation: Attempt to create the server profiles again; there should now be enough Virtual Identities to proceed without error.
By increasing the number of Virtual Identities, the administrator ensures that each new server can be assigned a unique Ethernet MAC Identity, which is necessary for network communication and management within OpenManage Enterprise.
For more detailed instructions on managing Identity pools and Virtual Identities, refer to the official Dell OpenManage documentation.
D
Explanation:
The error message indicates that there are not enough Ethernet MAC Identities available for assignment to the template. This suggests that the Identity pool does not have a sufficient number of Virtual Identities to accommodate the creation of server profiles for the new PowerEdge servers. To successfully create the profiles, the administrator needs to increase the number of Virtual Identities in the Identity pool.
Here’s how to do it:
Access OpenManage Enterprise: Log into the OpenManage Enterprise console.
Navigate to Identity Pool: Go to the section where the Identity pools are managed.
Edit the Identity Pool: Select the Identity pool that is being used for the server profiles.
Increase Virtual Identities: Increase the number of Virtual Identities within the pool to ensure there are enough available for all the new servers.
Save Changes: Save the changes to the Identity pool.
Retry Profile Creation: Attempt to create the server profiles again; there should now be enough Virtual Identities to proceed without error.
By increasing the number of Virtual Identities, the administrator ensures that each new server can be assigned a unique Ethernet MAC Identity, which is necessary for network communication and management within OpenManage Enterprise.
For more detailed instructions on managing Identity pools and Virtual Identities, refer to the official Dell OpenManage documentation.
Question #9
What is the primary reason a catalog file cannot be deleted from an OpenManage Enterprise appliance?
- A . The user lacks administrator privileges.
- B . At least one catalog must always be present.
- C . The catalog is linked to a firmware baseline.
- D . The catalog is currently being updated.
Correct Answer: C
Question #10
What is a supported feature of OpenManage Enterprise?
- A . Monitor Dell EMC network devices
- B . Manage virtual machines
- C . License management
- D . Discover and monitor Dell Technologies client devices
Correct Answer: A
A
Explanation:
A supported feature of OpenManage Enterprise is:
A
Explanation:
A supported feature of OpenManage Enterprise is: