CompTIA N10-009 Practice Exams
Last updated on Nov 16,2026- Exam Code: N10-009
- Exam Name: CompTIA Network+ Certification
- Certification Provider: CompTIA
- Latest update: Nov 16,2026
A network administrator installs new cabling to connect new computers and access points. After deploying the equipment, the administrator notices a few of the devices are not connecting properly. The administrator moves the devices to a different port, but it does not resolve the issue.
Which of the following should the administrator verify next?
- A . Power budget
- B . Device requirements
- C . Port status
- D . Cable termination
D
Explanation:
• Cable termination issues (e.g., improper crimping, loose connectors) can cause connectivity failures.
• Power budget (A) applies to PoE devices, not general cabling issues.
• Device requirements (B) relate to software/hardware compatibility, not wiring faults.
• Port status (C) would help if the issue was switch-related, but since moving devices didn’t help, it’s likely a cabling issue.
Reference: CompTIA Network+ N10-009 Official Documentation C Cabling & Physical Layer Troubleshooting.
A network administrator is configuring a wireless network with an ESSID.
Which of the following is a user benefit of ESSID compared to SSID?
- A . Stronger wireless connection
- B . Roaming between access points
- C . Advanced security
- D . Increased throughput
B
Explanation:
An Extended Service Set Identifier (ESSID) allows multiple access points to share the same SSID, enabling seamless roaming for users. This means that users can move between different access
points within the same ESSID without losing connection or having to reauthenticate. This provides a better user experience, especially in large environments such as office buildings or campuses.
Reference: CompTIA Network+ study materials.
A firewall administrator is mapping a server’s internal IP address to an external IP address for public use.
Which of the following is the name of this function?
- A . NAT
- B . VIP
- C . PAT
- D . BGP
A
Explanation:
Network Address Translation (NAT) is a process that allows a device, typically a firewall or router, to map private IP addresses to public IP addresses. This enables internal network devices to communicate over the internet using a single or a limited number of public IP addresses.
Static NAT (One-to-One Mapping): Maps a single private IP address to a single public IP address, commonly used for servers that need to be accessible from the internet.
Dynamic NAT (Many-to-Many Mapping): Dynamically assigns a public IP from a pool to internal devices.
PAT (Port Address Translation): A type of NAT where multiple private IPs share a single public IP using
different port numbers.
Incorrect Options:
B. VIP (Virtual IP Address): Used in load balancing and high-availability configurations, not for NAT.
C. PAT (Port Address Translation): A specific form of NAT, but the question refers to general NAT, making option A the best choice.
D. BGP (Border Gateway Protocol): A routing protocol used to exchange information between different networks, not related to NAT.
Reference: CompTIA Network+ N10-009 Official Study Guide C Chapter on Network Address Translation (NAT)
168.1.0/24 as their network address and need to create three subnets with 30 hosts on each subnet.
Which of the following is a valid subnet mask that will meet the requirements?
- A . 255.255.255.128
- B . 255.255.255.192
- C . 255.255.255.224
- D . 255.255.255.240
B
Explanation:
To create three subnets with at least 30 hosts each:
Subnet Calculation: Each subnet must support 32 addresses (30 usable + 2 reserved for network and broadcast).
Bits for Subnets: Subnet mask 255.255.255.192 (/26) provides 64 addresses per subnet (4 subnets total).
Valid Subnets: Each subnet provides sufficient IPs to meet the requirement.
Which of the following network cables involves bounding light off of protective cladding?
- A . Twinaxial
- B . Coaxial
- C . Single-mode
- D . Multimode
D
Explanation:
Multimode fiber optic cables involve the transmission of light signals that bounce off the core’s cladding as they travel down the fiber. This characteristic differentiates it from single-mode fiber, where the light travels directly down the fiber without reflecting off the cladding.
Here are some detailed points about multimode fiber cables:
Construction: Multimode fibers have a larger core diameter, typically 50 or 62.5 microns, compared to single-mode fibers, which have a core diameter of about 9 microns.
Light Propagation: The larger core of multimode fiber allows multiple light modes to propagate. These modes travel at different angles, leading to reflections off the core-cladding boundary. Distance and Bandwidth: Due to modal dispersion, where different light modes arrive at the receiver at different times, multimode fibers are suited for shorter distance applications compared to single-mode fibers. Typical distances are up to 550 meters for 10 Gbps Ethernet using OM4 multimode fiber. Applications: Multimode fibers are commonly used in LANs (Local Area Networks), data centers, and for shorter distance data transmission due to their cost-effectiveness and ease of installation. Network
Reference: CompTIA Network+ N10-007 Official Certification Guide, which covers fiber optic technologies, including the differences between multimode and single-mode fibers.
Cisco Networking Academy: Provides training materials and reference guides on the properties of different fiber optic cables.
Fiber Optic Association (FOA): A professional society dedicated to fiber optics, offering extensive information and certification on fiber optic technologies.
Multimode fibers are specifically designed for short-range communication with higher data rates and are typically used in environments like data centers, where high bandwidth over shorter distances is crucial. The reflections off the cladding, inherent to multimode fiber, facilitate this high-capacity communication.
A network engineer is testing a website to ensure it is compatible with IPv6. After attempting to ping the website by its IPv6 address, the engineer determines that the DNS has not been set up properly.
Which of the following should the network engineer complete to resolve this issue?
- A . Enable a PTR record.
- B . Update the existing TXT record.
- C . Add a new AAAA record.
- D . Configure a secondary NS record.
C
Explanation:
• AAAA records map domain names to IPv6 addresses, enabling proper resolution.
• PTR records (A) are for reverse DNS lookups.
• TXT records (B) store text-based information, not IP addresses.
• NS records (D) define authoritative name servers but don’t directly affect IPv6 resolution.
Reference: CompTIA Network+ N10-009 Official Documentation C DNS Configuration & IPv6.
A network administrator wants to configure a backup route in case the primary route fails. A dynamic routing protocol is not installed on the router.
Which of the following routing features should the administrator choose to accomplish this task?
- A . Neighbor adjacency
- B . Link state flooding
- C . Administrative distance
- D . Hop count
C
Explanation:
Introduction to Administrative Distance
Administrative distance (AD) is a value used by routers to rank routes from different routing protocols. AD represents the trustworthiness of the source of the route. Lower AD values are more preferred. If a router has multiple routes to a destination from different sources, it will choose the route with the lowest AD.
Static Routes and Backup Routes
When a dynamic routing protocol is not used, static routes can be employed. Static routes are manually configured routes. To ensure a backup route, multiple static routes to the same destination can be configured with different AD values.
Configuring Static Routes with Administrative Distance
The primary route is configured with a lower AD value, making it the preferred route. The backup route is configured with a higher AD value. In the event of the primary route failure, the router will then use the backup route.
Example Configuration:
plaintext
Copy code
ip route 192.168.1.0 255.255.255.0 10.0.0.1 1
ip route 192.168.1.0 255.255.255.0 10.0.0.2 10
In the above example, 192.168.1.0/24 is the destination network.
A network administrator needs to deploy a subnet using an IP address range that can support at least 260 devices with the fewest wasted addresses.
Which of the following subnets should the administrator use?
- A . 172.16.0.0/24
- B . 172.25.2.0/23
- C . 172.30.1.0/22
- D . 172.33.0.0/21
B
Explanation:
To support at least 260 hosts, you need at least 512 total IP addresses (accounting for network/broadcast overhead).
/23 (255.255.254.0) gives 510 usable IPs, ideal for 260 devices with minimal waste.
/24 (255.255.255.0) gives only 254 usable ― not enough.
/22 (1022 usable) and /21 (2046 usable) would work but result in significant address waste.
Reference: CompTIA Network+ N10-009 Official Objectives: 2.1 C Given a scenario, configure and apply IP addressing schemes.
Which of the following routing protocols uses an autonomous system number?
- A . IS-IS
- B . EIGRP
- C . OSPF
- D . BGP
D
Explanation:
BGP (Border Gateway Protocol) uses an Autonomous System (AS) number for its operations. An AS is a collection of IP networks and routers under the control of a single organization that presents a common routing policy to the Internet. BGP is used to exchange routing information between different ASes on the Internet, making it the only protocol among the listed options that uses an AS number.
Reference: CompTIA Network+ study materials and RFC 4271.
An IT department asks a newly hired employee to use a personal laptop until the company can provide one.
Which of the following policies is most applicable to this situation?
- A . IAM
- B . BYOD
- C . DLP
- D . AUP
B
Explanation:
Comprehensive and Detailed
BYOD (Bring Your Own Device) policies define rules for using personal devices on the company network. Since the new employee is using a personal laptop, this policy applies.
Breakdown of Options: