Cisco 350-801 Practice Exams
Last updated on Nov 16,2026- Exam Code: 350-801
- Exam Name: Implementing and Operating Cisco Collaboration Core Technologies (CLCOR)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Which action is required for a firewall configuration on a Mobile and Remote Access through Cisco Expressway deployment?
- A . The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061: HTTPS: TCP 8443; XMPP: TCP 5222; Media: UDP 36002 to 59999.
- B . The internal firewall must allow these inbound and outbound connections between Expressway- ׀ ¡ and Expressway-E: SIP: HTTPS (tunneled over SSH between ׀ ¡ and E): TCP 2222: TCP 7001; Traversal Media: UDP 2776 to 2777 (or 36000 to 36011 for large VM/appliance); XMPP: TCP 7400.
- C . Do not use a shared address for Expressway-E and Expressway- ׀ ¡, as the firewall cannot distinguish between them. If static NAT for IP addressing on Expressway-E is used, ensure that any NAT operation on Expressway- ׀ ¡ does not resolve the same traffic IP address. Shared NAT is not supported.
- D . The traversal zone on Expressway- ׀ ¡ points to Expressway-E through the peer address field on the traversal zone, which specifies the Expressway-E server address. For dual NIC deployments, set the Expressway-E address using an FQDN that resolves the IP address of the internal interface.
Refer to the exhibit.

An engineer is troubleshooting this video conference issue:
✑ A video call between a Cisco 9971 in Region1 and another Cisco 9971 in Region1 works.
✑ As soon as the Cisco 9971 in Region1 conferences in a Cisco 8945 in Region2, the Region1 endpoint cannot see the Region2 endpoint video.
What is the cause of this issue?
- A . Cisco 8945 does not have a camera connected.
- B . Maximum Audio Bit Rate must be increased.
- C . Maximum Session Bit Rate for Video Calls is too low.
- D . Maximum Session Bit Rate for Immersive Video Calls is too low.
An engineer is designing a load balancing solution for two Cisco Unified Border Element routers. The first router (cube1.ab.com) takes 60% of the calls and the second router (cube2.abc.com) takes 40% of the calls. Assume all DNS A records have been created.
Which two SRV records are needed for a load balanced solution? (Choose two.)
- A . _sip._udp.abc.com 60 IN SRV 2 60 5060 cube1.abc.com
- B . _sip._udp.abc.com 60 IN SRV 60 1 5060 cube1.abc.com
- C . _sip._udp.abc.com 60 IN SRV 1 40 5060 cube2.abc.com
- D . _sip._udp.abc.com 60 IN SRV 3 60 5060 cube2.abc.com
- E . _sip._udp.abc.com 60 IN SRV 1 60 5060 cube1.abc.com
An engineer deploys a Cisco Expressway-E server for a customer who wants to utilize all features on the server.
Which feature does the engineer configure on the Expressway-E?
- A . H.323 endpoint registrations
- B . VTC bridge
- C . MRA
- D . SIP gateway for PSTN providers
How many DNS SRV entries can be defined in the SIP trunk destination address field in Cisco Unified Communications Manager?
- A . 1
- B . 8
- C . 16
- D . 4
DRAG DROP –
Drag and drop the SNMPv3 message types from the left onto the corresponding definitions on the right.

Refer to the exhibit.

Calls to Cisco Unity Connection are failing across Cisco Unified Border Element when callers try to select a menu prompt.
Why is this happening and how is it fixed?
- A . Cisco Unified Border Element is sending the incorrect media IP address. The IP address of the loopback interface must be advertised in the SDP.
- B . Cisco Unity Connection is configured on G.729 only. Cisco Unity Connection must be reconfigured to support iLBC.
- C . Cisco Unified Border Element is not sending any support for DTMF. DTMF configuration must be added to the appropriate dial peer.
- D . The Cisco Unity Connection Call Handler is configured for a “Release to Switch” transfer type. Transfers must be disabled for the Cisco Unity Connection Call Handler.
Which DHCP option must be set up for new phones to obtain the TFTP server IP address?
- A . option 15
- B . option 6
- C . option 66
- D . option 120
Which configuration step is necessary for a Cisco SIP phone to synchronize its time with a specific source?
- A . Add a Phone NTP Reference to the Date/Time Group.
- B . Assign the device to the correct region.
- C . Change the Time Format from 24-hour to 12-hour.
- D . Change the Time Zone from “ America/Los_Angeles" to ” Etc/GMT+8".
An administrator configures Cisco UCM to use UDP for SIP signaling and finds that an endpoint cannot make calls.
Which action resolves this issue?
- A . Change the common phone profile.
- B . Change the SIP dial rules.
- C . Change the SIP profile.
- D . Change the phone security profile.
