Cisco 300-425 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-425
- Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
A company is upgrading the wireless infrastructure and is in a state of transition. Some parts of the company’s building still run on the legacy WLC. The new WLC is not located at the same site as the legacy WLC. The company requires seamless client inter-controller roaming between the new WLC and the legacy WLC, with no disruptions. Both WLCs are separated by firewalls.
Which troubleshooting command validates that the mobility control packets between the WLCs can be sent and received?
- A . mapping mobility_peer IP address
- B . debug mobility handoff enable
- C . debug mobility con¬g enable
- D . mapping mobility_peer_management IP address
A customer is running a guest WLAN with a foreign/export-anchor setup. There is one anchor WLC in the US and two in Europe. Anchor WLC priorities are used to prefer local anchors. During a routine network audit, it is discovered that a large number of guest client sessions in the US are anchored to the WLCs in Europe.
Which reason explains this behavior?
- A . The foreign WLC failed and recovered.
- B . The US anchor WLC failed and recovered.
- C . The US anchor WLC is anchored to itself with a priority value of zero.
- D . The anchor WLC is in the same mobility group.
B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/WirelessNetwork_GuestAccessService.html
A customer has this wireless design:
• two Cisco Catalyst 9800 Series wireless controllers that are configured in a high-availability SSO cluster to manage the APs in a local office network
• 100 APs in local mode that are registered to the high-availability cluster
• one Catalyst 9800 Series wireless controller that is deployed as an anchor in a DMZ
• a CAPWAP tunnel in UP state between the high-availability cluster and the anchor WLC
The customer wants the anchored traffic to remain up if a single WLC in the high-availability cluster fails.
How must this requirement be incorporated into the design?
- A . Configure the APs with the high-availability cluster as the primary base.
- B . Deploy EMC APs as anchors and configure a high-availability cluster.
- C . Create a separate EoIP tunnel for each WLC in the high-availability cluster.
- D . Configure the mobility MAC address for the high-availability cluster.
An enterprise is using two wireless controllers to support the wireless network. The data centre is located in the head office Each controller has a corporate WLAN configured with the nameCopr-
NET390595865WLC-1 and Copr-NET6837l638WLC-2. The APs are installed using a round-robin approach to load balance the traffic.
What should be changed on the configuration to optimize roaming?
- A . Move all access points to one controller and use the other as N+1 HA.
- B . Use the same WLAN name for the corporate network on both controllers.
- C . Use the same WLAN name for the corporate network on both controllers.
- D . Place the access points per floor on the same controller.
Guest anchoring is configured for a newly created SSID for your company. It has been noticed that
the mobility tunnels are not up, and that MPING fails from your foreign WLC to the anchor WLC.
What is the reason that it is failing?
- A . A rule is needed at the firewall to allow UDP port 16666 for communication to work.
- B . A rule is needed at the firewall to allow UDP port 97 for communication to work.
- C . A rule is needed at the firewall to allow TCP port 97 for communication to work.
- D . A rule is needed at the firewall to allow TCP port 16666 for communication to work.
A
Explanation:

An engineer is designing a new wireless network. Based on the design, OfficeExtend AP functionality must be used.
Which type of license must the Cisco 5520 WLC v8.3 have?
- A . Base license
- B . OfficeExtend AP license
- C . WPlus license
- D . Plus license
Refer to the exhibit.

A WLC SSO pair is set up.
Which failure scenario causes a split-brain scenario?
- A . RP is down.
- B . Two distribution ports on the active WLC are down.
- C . VSL is down.
- D . One distribution port on the active WLC is down.
What feature must be enabled to ensure APs in high-density deployments do not exceed safe RF levels?
- A . TPC
- B . DFS
- C . DCA
- D . RF Profiles
An engineer as performing a Layer 1 passive wireless site survey utilizing a channel analyzer software in the 2.4 GHz spectrum.
Which chart indicates the ratio of interference present during the duration of the capture?
A)

B)

C)

- A . Option A
- B . Option B
- C . Option C
- D . Option D
An engineer must perform a predictive design for a wireless network. The customer has devices that can tolerate at most 100ms of delay when roaming.
Which design criteria must be used?
- A . location
- B . data
- C . video
- D . voice