Cisco 300-425 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-425
- Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
A customer has a Wi-Fi network that is designed to support video over Wi-Fi. The Wi-Fi network has good coverage; however, video multicast traffic is unreliable. Video multicast traffic is reliable on the wired portion of the network.
Which performance value indicates an issue with the Wi-Fi multicast traffic?
- A . jitter
- B . packet error rate
- C . throughput
- D . latency
A wireless network consultant must assess an existing wireless LAN controller.
Which section must the consultant check before replacing the old APs with APs that are IEEE 802.11ac-capable?
- A . number of AP licenses
- B . controller PSU
- C . throughput capacity
- D . software version
A
Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9100ax-access-points/nb-06-802-11ax-faq-cte-en.html
What is the role of a WLC in a Split MAC architecture?
- A . It performs real-time MAC operations.
- B . It manages non-real-time MAC operations.
- C . It offloads client MAC operations to APs.
- D . It serves as the gateway for all wireless traffic.
An engineer performs a Layer 1 survey by using Metegeek chanalyzer only on the current operating channel.
Which operating mode is configured for a Cisco CleanAIR AP?
- A . Local
- B . Sniffer
- C . Monitor
- D . SE-connect
A
Explanation:

An engineer must assess an existing company WLAN to determine the possibility for future IEEE 802.11ac Wave 2 wireless deployment. The existing WLAN is IEEE 802.11a/n and has IEEE 802.11n and 802. 11a clients. The engineer must advise the customer about support for these older clients on the new APs.
What happens with client compatibility?
- A . 802.11ac is backward compatible with 802.11n but not with 802.11a.
- B . 802.11ac is backward compatible with 802.11a but not with 802.11n.
- C . 802.11ac is backward compatible with 802.11a and 802.11n.
- D . 802.11ac is not backward compatible with 802.11a or 802.11n.
An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points.
Which key caching mechanism is enabled by default on a Cisco AireOS WLC?
- A . SKC
- B . OKC
- C . 802.11r
- D . CCKM
B
Explanation:


A hospital wireless environment was designed with these characteristics:
• RF coverage
• better than -67 dBm in the 5 GHz spectrum
• RRM be used for DCA and TPC in the 2.4 GHz band
• RRM be used for DCA and TPC in the 5 GHz band
After deployment, why do many of the legacy 802.11b/g devices have difficulty maintaining connectivity?
- A . Excessive co-channel interference in the 2.4 GHz band exists.
- B . Excessive overlapping channels in the 2.4 GHz band exists.
- C . TPC drastically increases Tx power in the 2.4 GHz band.
- D . TPC drastically reduces Tx power in the 2.4 GHz band.
What is the benefit of deploying a wireless mesh network?
- A . Increased scalability and flexibility in areas lacking physical cabling
- B . Enhanced security through multiple encrypted paths
- C . Reduced operational costs due to lower power consumption
- D . Simplified compliance with regulatory standards
A network engineer is preparing for an office site survey with a height of 2.5 meters.
Which three components are recommended to complete the survey? (Choose three.)
- A . Use a battery pack to power APs
- B . Use a drawing of the office space to draw AP and client placements.
- C . Use DoS attack on APs while measuring the throughput.
- D . Use APs with directional antennas.
- E . Use APs with external antennas.
- F . Use APs with built-in antennas.
A,B,F
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/8-4/b_mesh_84/Site_Preparation_and_Planning.html#ID3405
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services.
What is the minimum requirement for the design?
- A . overlapping -72 dBm coverage from two access points
- B . continuous -67 dBm coverage from one access point
- C . continuous -72 dBm coverage from one access point
- D . overlapping -67 dBm coverage from two access points
B
Explanation:
![]()
So -67dBm covers both Data & Voice with a single AP