Cisco 300-425 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-425
- Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
A network engineer is troubleshooting connectivity issues between two WLCs running 8.x code in SSO mode and finds that the redundancy management heartbeat is failing.
Which packet type must be filtered for heartbeats when taking a capture to verify communication?
- A . RSTP
- B . UDP
- C . TCP
- D . ICMP
An engineer must perform a Layer 2 survey for a mining facility.
Which type of antenna does the engineer use in the mine shaft?
- A . omnidirectional
- B . patch
- C . internal
- D . dipole
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- A . the client that has the highest RF properties
- B . the client that is used most by the company
- C . the client that is used least by the company
- D . the client with the worst RF characteristics
D
Explanation:
![]()
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_Access_Points
An engineer Is trying to determine the most cost-effective way to deploy high availability for a campus enterprise wireless network that currently leverages three wireless LAN controllers.
Which architecture should the engineer deploy?
- A . N+1 solution without SS0
- B . N+1 with SSO
- C . N+N solution without SSO
- D . N+N with SSO
B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Guide/N1_HA_Overview.html?
During a wireless network design, a customer requires wireless coverage on the perimeter of a building but also wants to minimize signal leakage from the wireless network.
Which antenna should be used to accomplish this design?
- A . Patch
- B . Dipole
- C . Monopole
- D . Omnidirectional
C
Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/connectedgrid/antennas/installing-combined/industrial-routers-and-industrial-wireless-antenna-guide/ANT-MP-INT-OUT-M.html
Refer to the exhibit.

What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
- A . aesthetics
- B . transmit power considerations
- C . antenna gain
- D . power supply considerations
B
Explanation:
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/RFDesign.html#wp10 00551
APs in a remote office recently have been converted from local mode to FlexConnect to take advantage of the local switching. After the change, remote wireless users report voice quality issues and bad quality on wireless IP phones while roaming. A debug is performed, and it is noticed that the 802.11r Fast Transition is not working as expected, like on local mode AP, though the same WLAN configuration is in place.
What is the cause of the issue regarding the FlexConnect APs?
- A . They do not support 802.11r FT.
- B . They must be added into AP groups along with a common RF profile.
- C . They must be in a FlexConnect group to support 802.11r FT.
- D . They must be added to AP groups to support fast roaming methods.
C
Explanation:
Reference: https://www.cisco.com/c/dam/en/us/td/docs/wireless/controller/technotes/80211r-ft/b-80211r-dg.html
A company wants to replace its existing PBX system with a new VoIP System that will include wireless IP phones. The CIO has concerns about whether the company’s existing wireless network can support the new system.
Which tool in Cisco Prime can help ensure that the current network will support the new phone system?
- A . Location Readiness
- B . Site Calibration
- C . Map Editor
- D . Voice Readiness
D
Explanation:
![]()
A network administrator of a global organization is collapsing all controllers to a single cluster located in central Europe.
Which concern must addressed?
- A . Some channels may not be available consistently across the organization.
- B . Different RF policies per office are not available in this configuration.
- C . Syslog must be configured to the time-zone of the NMS platform.
- D . Centralized controllers cannot uniformly authenticate global users.
A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/86/b_Cisco_Wireless_LAN_Controller_Configuration_Best_Practices.html
A customer uses a Cisco 5520 WLC that is connected via a single 10-GB interface to manage the wireless network. The wireless network includes 500 APs for the campus network. The customer wants to add 300 APs and is concerned about traffic load and lack of redundancy. The purchase of a second controller is not an option.
Which design approach mitigates the customer concerns?
- A . Connect a second 10-GB interface on the WLC and set the port as a secondary port.
- B . Connect a second 10-GB interface on the WLC and implement LAG.
- C . Implement a vWLC and configure SSO with the WLC.
- D . Implement a vWLC and configure N+1 redundancy with the WLC.