Cisco 300-425 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-425
- Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
An architect configures a set of AirOS controllers to be in the same mobility group as the existing controllers. The implementation should facilitate inter-controller roaming for users in their new campus. After the configuration, the mobility tunnel is not operational for the data path in the network.
Which two validations should be performed? (Choose two.)
- A . firewall port 16666
- B . mapping
- C . mepping
- D . rping
- E . firewall IP protocol 97
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has 40. The customer wants to convert the N+1 model to an HA model and provide SSO.
Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails.
Which parameter needs to be in place to complete the configuration?
- A . A cable in the RP port
- B . The secondary Cisco WLC needs a minimum of 50 base licenses
- C . The primary Cisco WLC is already set as the secondary unit.
- D . SSO needs to be enabled
B
Explanation:

During site surveys for VoWLAN, which two criteria must be considered for optimal performance? (Choose two)
- A . Overlap between cells should be at least 20%.
- B . Signal strength should be at least -67 dBm at all client locations.
- C . APs must be installed only at corridor ends.
- D . Only indoor APs should be used regardless of external areas.
- E . APs should support PoE for simplified infrastructure.
Which RF design feature is essential to minimize co-channel interference?
- A . High gain antennas
- B . Directional antennas
- C . Limited RF power
- D . Dynamic Channel Assignment
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones.
Which dBm range is the network inspected against?
- A . -78 to -65 dBm
- B . -72 to -67 dBm
- C . -85 to -65 dBm
- D . -85 to -67 dBm
D
Explanation:
![]()
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/34/user/guide/bk_CiscoPrimeInfrastructure_3_4_0_UserGuide/bk_CiscoPrimeInfrastructure_3_4_0_UserGuide_chapter_0101 0.html
minimum is -90 and maximum is -67 for IP phone
Multiple WLCs are implemented in a high-availability configuration in a mobility group. APs are deployed with only a primary controller assigned.
By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?
- A . controller with the most available AP free license capacity
- B . controller with the lowest percent of associated APs per license capacity
- C . controller with the least CPU utilization over the last reporting period
- D . controller with the least number of associated APs
A
Explanation:
https://mrncciew.com/2013/04/07/ap-failover/
DRAG DROP
Drag and drop the characteristics from the left onto the correct functionalities on the right.

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010 100001.html
A customer has multiple WLCs running N+1 redundancy with APs equally distributed. Only one WLC is a designated backup for all other WLCs so the customer must ensure that the most critical APs remain registered or get priority over other APs in case of a WLC failure. However, the customer notices on WLC failure that some critical APs remain unregistered What needs to be addressed in the design?
- A . AP fallback is not enabled on the backup WLC.
- B . AP failover priority is not enabled globally on the backup WLC.
- C . AP failover priority is not enabled globally on the failed WLC.
- D . AP fallback is not enabled on the failed WLC.
A wireless engineer is designing a wireless network to support real time applications over wireless.
Which IEEE protocol must the engineer enable on the WLC so that neighbor list radio management packets are sent to the wireless devices?
- A . 802.11w
- B . 802.11r
- C . 802.11i
- D . 802.11k
A wireless engineer is designing a wireless network to support real-time applications over wireless.
Which IEEE protocol must the engineer enables on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?
- A . 802.11w
- B . 802.11r
- C . 802.11i
- D . 802.11k
D
Explanation:
![]()