Cisco 300-425 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-425
- Exam Name: Designing Cisco Enterprise Wireless Networks (ENWLSD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
A wireless engineer must design a backhaul link. The engineer has a mesh access point that has a wired connection back to the infrastructure.
What must be changed in the AP role before a change is made in the AP mode?
- A . monitor
- B . RAP
- C . bridge
- D . local
An engineer has deployed a group of APs in an auditorium and notices that the APs are showing high cochannel interference.
Which profile can be used to adjust the parameters for these high-density APs?
- A . QoS profile
- B . AVC profile
- C . RF profile
- D . ISE profile
C
Explanation:

A customer has a Cisco wireless network that supports VoWLAN services. The customer wants supported voice clients to receive roaming recommendations and suggestions from APs. This functionality must not impact non-VoWLAN clients.
What should be enabled on the VoWLAN SSID?
- A . 802.11r Fast Transition
- B . 802.11k neighbor lists
- C . CCKM with 802.1X
- D . 802.11v BSS Transition Management
An engineer designed a new wireless network for an enterprise customer. The customer is concerned that some wireless features may not be available because the bill of materials has only Base and no WPlus licenses for the Cisco WLC version 8.
What is the reason for the engineer to take this approach regarding the licenses?
- A . ForceExtend AP needs a WPlus license.
- B . CAPWAP Data Encryption licenses are required for this feature.
- C . All WLC features are available because WPLUS license is now included in the Base license.
- D . To have all the features, plus licenses must be installed on the WLC.
An engineer must create data-link redundancy for the company’s Cisco Wireless LAN Controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy.
Which three features of LAG-based redundancy influenced this decision? (Choose three.)
- A . Packets are always sent out on the same port they are received on.
- B . All interface traffic passes as long as one port is up.
- C . The same port has multiple untagged dynamics interfaces.
- D . Interface connection to two separate nonstacked switches is available.
- E . Full bandwidth of all links is available.
- F . Ports are grouped into multiple LAGs.
A,B,F
Explanation:
https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669
A customer has a single anchor WLC named Anchor A. Anchor A is in a DMZ and provides guest access. The customer wants to deploy an additional anchor controller named Anchor B to provide redundancy if Anchor A fails.
Which design approach should be taken for the guest WLAN priority on the foreign WLC for each anchor WLC?
- A . Set Anchor A to priority 3 and Anchor B to priority 3.
- B . Set Anchor A to priority 3 and Anchor B to priority 1.
- C . Set Anchor A to priority 1 and Anchor B to priority 1.
- D . Set Anchor A to priority 1 and Anchor B to priority 3.
A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP with high gain antennas for industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several APs.
Which strategy will reduce the negative impact of the design?
- A . Resurvey and adjust the design.
- B . Deploy unsurveyed access points to the design.
- C . Deploy the specified access points per area type.
- D . Increase the Tx power on incorrectly surveyed access points.
An engineer is setting up the WLC to support a high-density design for a lecture hall. The engineer must modify the existing high-density RF protocol to obtain a smaller cell size. Also, the clients must connect to the nearest AP using the highest possible data rates.
Which setting allows this design?
- A . AP load balance
- B . client distribution
- C . power threshold
- D . RX-SOP threshold
Which statement about creating a mobility group is true, excluding mobility anchors?
- A . Each WLC must use the same mobility name and be defined as a peer in each other’s static mobility members list.
- B . If WLCs with HA SSO are deployed, each WLC in the WLC HA pair considered separately as a mobility peer.
- C . The WLCs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.
- D . A mobility groups does not require all WLCs in the group to use the same virtual IP address.
B
Explanation:

An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism.
Which mechanism must be configured?
- A . PEAP
- B . FT
- C . PMF
- D . GTK-randomization
B
Explanation:
![]()