Cisco 300-420 Practice Exams
Last updated on Nov 16,2026- Exam Code: 300-420
- Exam Name: Designing Cisco Enterprise Networks (ENSLD)
- Certification Provider: Cisco
- Latest update: Nov 16,2026
Which design consideration should be observed when EIGRP is configured on Data Center switches?
- A . Perform manual summarization on all Layer 3 interfaces to minimize the size of the routing table.
- B . Prevent unnecessary EIGRP neighborships from forming across switch virtual interfaces.
- C . Lower EIGRP hello and hold timers to their minimum settings to ensure rapid route reconvergence.
- D . Configure multiple EIGRP autonomous systems to segment Data Center services and applications.
Refer to the exhibit.

A network engineer must improve the current IS-IS environment. The Catalyst switch is equipped with dual supervisors. Each time a stateful switchover occurs, the network experiences unnecessary route recomputation.
Which solution addresses this issue if the upstream router does not understand graceful restart messaging?
- A . Enable IS-IS remote LFA FRR on both devices.
- B . Enable NSR on the switch.
- C . Enable NSF on the switch.
- D . Configure ISIS aggressive timers on both devices.
Refer to the exhibit.

Area 10 is a regular OSPF area and networks 10.1.1.0/24 and 172.16.1.0/24 are internal.
Which design provides optimal routing between both networks when the link between routers C and E fails?
- A . Move the link between routers C and D to area 10.
- B . Create an OSPF virtual link between routers E and F.
- C . Create a tunnel between routers E and F in area 10.
- D . Make area 10 a not-so-stubby area.
DRAG DROP
Drag and drop the elements from the left onto the protocols where they are used on the right.

Which type of rendezvous point deployment is standards-based and support dynamic RP discovery?
- A . Auto-RP
- B . Anycast-RP
- C . bootstrap router
- D . static RP
Refer to the exhibit.

AS65533 and AS65530 are announcing a partial Internet routing table as well as their IP subnets. An architect must create a design that ensures AS64512 become a transit AS.
Which filtering solution must the architect choose?
- A . Maximum-prefix
- B . No-advertise
- C . Next-hop
- D . No Export
Which two border nodes are available in the Cisco SD-Access architecture? (Choose two.)
- A . extended border
- B . edge border
- C . internal border
- D . anywhere border
- E . intermediate border
An infrastructure team is concerned about the shared memory utilization of a device, and for this reason, they need to monitor the device state.
Which solution limits impact on the device and provides the required data?
- A . IPFIX
- B . static telemetry
- C . on-change subscription
- D . periodic subscription
A company is running BGP on a single router, which has two connections to the same ISP.
Which BGP feature ensures traffic is load balanced across the two links to the ISP?
- A . Multihop
- B . Multipath Load Sharing
- C . Next-Hop Address Tracking
- D . AS-Path Prepending
Refer to the exhibit.

A customer is running HSRP on the core routers. Over time the company has grown and requires more
network capacity. In the current environment, some of the downstream interfaces are almost fully utilized, but others are not.
Which solution improves the situation?
- A . Make router R2 active for half of the VLANs.
- B . Add more interfaces to R1 and R2.
- C . Configure port channel toward downstream switches.
- D . Enable RSTP on the downstream switches.